41 resultados para click-and-use software
Resumo:
PURPOSE: To describe and evaluate a new method for measuring anterior chamber volume (ACV). DESIGN: Observational case series. METHODS: The authors measured ACV using the anterior chamber (AC) optical coherence tomographer (OCT) and applied image-processing software developed by them. Repeatability was evaluated. The ACV was measured in patient groups with normal ACs, shallow ACs, and deep ACs. The volume difference before and after laser peripheral iridotomy (LPI) was analyzed for the shallow and deep groups. RESULTS: Coefficients of repeatability for intraoperator, interoperator, and interimage measurements were 0.406%, 0.958%, and 0.851%, respectively. The limits of agreement for intraoperator and interoperator measurement were -0.911 microl to 1.343 microl and -7.875 microl to -2.463 microl, respectively. There were significant ACV differences in normal, shallow, and deep AC eyes (P < .001) and before and after LPI in shallow AC (P < .001) and deep AC (P = .008) eyes. CONCLUSIONS: The ACV values obtained by this method were repeatable and in accord with clinical observation.
Resumo:
Abstract To achieve higher flexibility and to better satisfy actual customer requirements, there is an increasing tendency to develop and deliver software in an incremental fashion. In adopting this process, requirements are delivered in releases and so a decision has to be made on which requirements should be delivered in which release. Three main considerations that need to be taken account of are the technical precedences inherent in the requirements, the typically conflicting priorities as determined by the representative stakeholders, as well as the balance between required and available effort. The technical precedence constraints relate to situations where one requirement cannot be implemented until another is completed or where one requirement is implemented in the same increment as another one. Stakeholder preferences may be based on the perceived value or urgency of delivered requirements to the different stakeholders involved. The technical priorities and individual stakeholder priorities may be in conflict and difficult to reconcile. This paper provides (i) a method for optimally allocating requirements to increments; (ii) a means of assessing and optimizing the degree to which the ordering conflicts with stakeholder priorities within technical precedence constraints; (iii) a means of balancing required and available resources for all increments; and (iv) an overall method called EVOLVE aimed at the continuous planning of incremental software development. The optimization method used is iterative and essentially based on a genetic algorithm. A set of the most promising candidate solutions is generated to support the final decision. The paper evaluates the proposed approach using a sample project.
Resumo:
The objective of this study was to evaluate the effects of antimicrobial drug use, gastric acid-suppressive agent use, and infection control practices on the incidence of Clostridium difficile-associated diarrhea (CDAD) in a 426-bed general teaching hospital in Northern Ireland. The study was retrospective and ecological in design. A multivariate autoregressive integrated moving average (time-series analysis) model was built to relate CDAD incidence with antibiotic use, gastric acid-suppressive agent use, and infection control practices within the hospital over a 5-year period (February 2002 to March 2007). The findings of this study showed that temporal variation in CDAD incidence followed temporal variations in expanded-spectrum cephalosporin use (average delay = 2 months; variation of CDAD incidence = 0.01/100 bed-days), broad-spectrum cephalosporin use (average delay = 2 months; variation of CDAD incidence = 0.02/100 bed-days), fluoroquinolone use (average delay = 3 months; variation of CDAD incidence = 0.004/100 bed-days), amoxicillin-clavulanic acid use (average delay = 1 month; variation of CDAD incidence = 0.002/100 bed-days), and macrolide use (average delay = 5 months; variation of CDAD incidence = 0.002/100 bed-days). Temporal relationships were also observed between CDAD incidence and use of histamine-2 receptor antagonists (H2RAs; average delay = 1 month; variation of CDAD incidence = 0.001/100 bed-days). The model explained 78% of the variance in the monthly incidence of CDAD. The findings of this study highlight a temporal relationship between certain classes of antibiotics, H2RAs, and CDAD incidence. The results of this research can help hospitals to set priorities for restricting the use of specific antibiotic classes, based on the size-effect of each class and the delay necessary to observe an effect.
Resumo:
This paper reports on an ongoing, multiphase, project-based action learning and research project. In particular, it summarizes some aspects of the learning climate and outcomes for a case study company In the software industry, Using a participatory action research approach, the learning company framework developed by Pedler et al, (1997) is used to initiate critical reflection in the company at three levels: managing director, senior management team and technical and professional staff. As such, this is one of the first systematic attempts to apply this framework to the entire organization and to a company in the knowledge-based learning economy. Two sets of issues are of general concern to the company: internal issues surrounding the company's reward and recognition policies and practices and the provision of accounting and control information in a business relevant way to all levels of staff; and external issues concerning the extent to which the company and its members actively learn from other companies and effectively capture, disseminate and use information accessed by staff in boundary-spanning roles. The paper concludes with some illustrations of changes being introduced by the company as a result of the feedback on and discussion of these issues.
Resumo:
A rapidly increasing number of Web databases are now become accessible via
their HTML form-based query interfaces. Query result pages are dynamically generated
in response to user queries, which encode structured data and are displayed for human
use. Query result pages usually contain other types of information in addition to query
results, e.g., advertisements, navigation bar etc. The problem of extracting structured data
from query result pages is critical for web data integration applications, such as comparison
shopping, meta-search engines etc, and has been intensively studied. A number of approaches
have been proposed. As the structures of Web pages become more and more complex, the
existing approaches start to fail, and most of them do not remove irrelevant contents which
may a®ect the accuracy of data record extraction. We propose an automated approach for
Web data extraction. First, it makes use of visual features and query terms to identify data
sections and extracts data records in these sections. We also represent several content and
visual features of visual blocks in a data section, and use them to ¯lter out noisy blocks.
Second, it measures similarity between data items in di®erent data records based on their
visual and content features, and aligns them into di®erent groups so that the data in the
same group have the same semantics. The results of our experiments with a large set of
Web query result pages in di®erent domains show that our proposed approaches are highly
e®ective.
Resumo:
With the emergence of multicore and manycore processors, engineers must design and develop software in drastically new ways to benefit from the computational power of all cores. However, developing parallel software is much harder than sequential software because parallelism can't be abstracted away easily. Authors Hans Vandierendonck and Tom Mens provide an overview of technologies and tools to support developers in this complex and error-prone task. © 2012 IEEE.
Resumo:
Timely and individualized feedback on coursework is desirable from a student perspective as it facilitates formative development and encourages reflective learning practice. Faculty however are faced with a significant and potentially time consuming challenge when teaching larger cohorts if they are to provide feedback which is timely, individualized and detailed. Additionally, for subjects which assess non-traditional submissions, such as Computer-Aided-Design (CAD), the methods for assessment and feedback tend not to be so well developed or optimized. Issues can also arise over the consistency of the feedback provided. Evaluations of Computer-Assisted feedback in other disciplines (Denton et al, 2008), (Croft et al, 2001) have shown students prefer this method of feedback to traditional “red pen” marking and also that such methods can be more time efficient for faculty.
Herein, approaches are described which make use of technology and additional software tools to speed up, simplify and automate assessment and the provision of feedback for large cohorts of first and second year engineering students studying modules where CAD files are submitted electronically. A range of automated methods are described and compared with more “manual” approaches. Specifically one method uses an application programming interface (API) to interrogate SolidWorks models and extract information into an Excel spreadsheet, which is then used to automatically send feedback emails. Another method describes the use of audio recordings made during model interrogation which reduces the amount of time while increasing the level of detail provided as feedback.
Limitations found with these methods and problems encountered are discussed along with a quantified assessment of time saving efficiencies made.
Resumo:
While it is widely believed that the use of amnesties and similar measures would mark a new departure in NI and the UK, so that speculation about their introduction causes public controversy and threatens political instability, the report demonstrates that such measures have in fact been repeatedly used in a wide range of circumstances since the foundation of the NI state. The paper offers definitions of the key measures which have been employed, including amnesties, sentence reductions linked to peace building and use immunities. It explores their historical use and its consequences.
Resumo:
Introduction
The use of video capture of lectures in Higher Education is not a recent occurrence with web based learning technologies including digital recording of live lectures becoming increasing commonly offered by universities throughout the world (Holliman and Scanlon, 2004). However in the past decade the increase in technical infrastructural provision including the availability of high speed broadband has increased the potential and use of videoed lecture capture. This had led to a variety of lecture capture formats including pod casting, live streaming or delayed broadcasting of whole or part of lectures.
Additionally in the past five years there has been a significant increase in the popularity of online learning, specifically via Massive Open Online Courses (MOOCs) (Vardi, 2014). One of the key aspects of MOOCs is the simulated recording of lecture like activities. There has been and continues to be much debate on the consequences of the popularity of MOOCs, especially in relation to its potential uses within established University programmes.
There have been a number of studies dedicated to the effects of videoing lectures.
The clustered areas of research in video lecture capture have the following main themes:
• Staff perceptions including attendance, performance of students and staff workload
• Reinforcement versus replacement of lectures
• Improved flexibility of learning
• Facilitating engaging and effective learning experiences
• Student usage, perception and satisfaction
• Facilitating students learning at their own pace
Most of the body of the research has concentrated on student and faculty perceptions, including academic achievement, student attendance and engagement (Johnston et al, 2012).
Generally the research has been positive in review of the benefits of lecture capture for both students and faculty. This perception coupled with technical infrastructure improvements and student demand may well mean that the use of video lecture capture will continue to increase in frequency in the next number of years in tertiary education. However there is a relatively limited amount of research in the effects of lecture capture specifically in the area of computer programming with Watkins 2007 being one of few studies . Video delivery of programming solutions is particularly useful for enabling a lecturer to illustrate the complex decision making processes and iterative nature of the actual code development process (Watkins et al 2007). As such research in this area would appear to be particularly appropriate to help inform debate and future decisions made by policy makers.
Research questions and objectives
The purpose of the research was to investigate how a series of lecture captures (in which the audio of lectures and video of on-screen projected content were recorded) impacted on the delivery and learning of a programme of study in an MSc Software Development course in Queen’s University, Belfast, Northern Ireland. The MSc is conversion programme, intended to take graduates from non-computing primary degrees and upskill them in this area. The research specifically targeted the Java programming module within the course. It also analyses and reports on the empirical data from attendances and various video viewing statistics. In addition, qualitative data was collected from staff and student feedback to help contextualise the quantitative results.
Methodology, Methods and Research Instruments Used
The study was conducted with a cohort of 85 post graduate students taking a compulsory module in Java programming in the first semester of a one year MSc in Software Development. A pre-course survey of students found that 58% preferred to have available videos of “key moments” of lectures rather than whole lectures. A large scale study carried out by Guo concluded that “shorter videos are much more engaging” (Guo 2013). Of concern was the potential for low audience retention for videos of whole lectures.
The lecturers recorded snippets of the lecture directly before or after the actual physical delivery of the lecture, in a quiet environment and then upload the video directly to a closed YouTube channel. These snippets generally concentrated on significant parts of the theory followed by theory related coding demonstration activities and were faithful in replication of the face to face lecture. Generally each lecture was supported by two to three videos of durations ranging from 20 – 30 minutes.
Attendance
The MSc programme has several attendance based modules of which Java Programming was one element. In order to assess the consequence on attendance for the Programming module a control was established. The control used was a Database module which is taken by the same students and runs in the same semester.
Access engagement
The videos were hosted on a closed YouTube channel made available only to the students in the class. The channel had enabled analytics which reported on the following areas for all and for each individual video; views (hits), audience retention, viewing devices / operating systems used and minutes watched.
Student attitudes
Three surveys were taken in regard to investigating student attitudes towards the videoing of lectures. The first was before the start of the programming module, then at the mid-point and subsequently after the programme was complete.
The questions in the first survey were targeted at eliciting student attitudes towards lecture capture before they had experienced it in the programme. The midpoint survey gathered data in relation to how the students were individually using the system up to that point. This included feedback on how many videos an individual had watched, viewing duration, primary reasons for watching and the result on attendance, in addition to probing for comments or suggestions. The final survey on course completion contained questions similar to the midpoint survey but in summative view of the whole video programme.
Conclusions and Outcomes
The study confirmed findings of other such investigations illustrating that there is little or no effect on attendance at lectures. The use of the videos appears to help promote continual learning but they are particularly accessed by students at assessment periods. Students respond positively to the ability to access lectures digitally, as a means of reinforcing learning experiences rather than replacing them. Feedback from students was overwhelmingly positive indicating that the videos benefited their learning. Also there are significant benefits to part recording of lectures rather than recording whole lectures. The behaviour viewing trends analytics suggest that despite the increase in the popularity of online learning via MOOCs and the promotion of video learning on mobile devices in fact in this study the vast majority of students accessed the online videos at home on laptops or desktops However, in part, this is likely due to the nature of the taught subject, that being programming.
The research involved prerecording the lecture in smaller timed units and then uploading for distribution to counteract existing quality issues with recording entire live lectures. However the advancement and consequential improvement in quality of in situ lecture capture equipment may well help negate the need to record elsewhere. The research has also highlighted an area of potentially very significant use for performance analysis and improvement that could have major implications for the quality of teaching. A study of the analytics of the viewings of the videos could well provide a quick response formative feedback mechanism for the lecturer. If a videoed lecture either recorded live or later is a true reflection of the face to face lecture an analysis of the viewing patterns for the video may well reveal trends that correspond with the live delivery.