43 resultados para age type of added specimens


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents studies on the properties of fresh and hardened semilightweight self-consolidating concrete (SLWSCC) mixtures, produced with two types of manufactured coarse lightweight aggregates (LWA) and normal weight sand. The first type, a sintered pulverized fuel ash, was made from an industrial by-product, fly ash, whereas the second one, an expanded clay, was produced from a naturally sourced clay. For all mixtures, normal weight sand was used as a fine fraction of aggregates, and the portland cement was partially replaced with a limestone powder. The SLWSCC was produced with different water presaturation regimes of the LWAs. The desired initial slump-flow spread was set between 700 and 800 mm. The effect of three superplasticizers was evaluated by testing properties of SLWSCC, normal weight SCC, and paste mixtures. Three SCC fresh properties were measured: the slump-flow, the V-funnel flow time, and the J-ring blocking step. Moreover, the slump-flow loss was evaluated. The degree of segregation was assessed in both fresh and hardened states. Additionally, the hardened density and the compressive strengths were tested. All SLWSCC mixtures were produced with a desired range of slump-flow spread and with satisfactory passing ability assessed with the J-ring test. SLWSCCs prepared with the expanded clay LWA were less sensitive to the variation of water presaturation levels and showed lower viscosity than those made with the sintered pulverized fuel ash LWA. Only mixtures containing SP-3 superplasticizer showed acceptable workability loss resistance. The saturated surface-dry density of all of the mixtures varied in a range of 2,025–2,125??kg/m 3 . Mixtures containing 29% of coarse LWAs and 71% of sand (by mass) had 24-h and 28-day compressive strengths above 20 and 40 MPa, respectively, but the mixtures made with the expanded clay were slightly weaker.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Small off-road engines (SORE) have been recognised as a major source of air pollution. It is estimated that non handheld SORE annually produce over 1 million tonnes of HC+NOx and over 50 million tonnes of CO2. The fuel system design and its operating AFR are of key importance with regard to engine operation and engine out emissions. The conventional low-cost float carburettors used in these engines are relatively ineffective at atomising and preparing the fuel for combustion requiring a rich setting for acceptable functional performance. EPA and CARB have confirmed that Phase 3 limits are achievable for a “durable” engine fitted with a conventional well calibrated and manufactured “stock rich setting” float carburettor together with catalytic oxidation after-treatment and passive secondary air injection. The EPA and CARB strategy for meeting Phase 3 only considers the use of conventional float carburettors that operate at rich AFR’s over their entire engine operating range as no other cost effective alternative fuel system is yet available on the market. A cost effective alternative to the conventional carburettor that enabled leaner or optimised AFR operation with load and improved combustion performance would open the door to alternative strategies to meeting the phase 3 limits. This paper presents a completely new form of mechanical carburettor that gives AFR control with load, improved mixture preparation for improved combustion performance and has a lower production cost than conventional carburettors. The conventional and new fuel system designs and operation are discussed in detail and their technical merits demonstrated in the form of engine test data. The performance of different after-treatment systems is also simulated for different AFR profiles with load for a conventional or unmodified SORE engine. With optimised leaner operation and improved combustion characteristics, this new carburettor technology can provide significant engine out CO and HC+NOx reductions on the J1088 test cycle without loss of functional performance. Depending on the chosen emissions control strategy, minimum engine out emissions or optimum engine AFR for oxidation or three-way after-treatment or another, this new carburettor technology can be easily calibrated to provide the desired engine operating AFR profile on the J1088 cycle.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

To compare the rejection rates of non-small cell lung cancer (NSCLC) samples obtained by differing sampling methods for testing by Sanger sequencing for epidermal growth factor receptor (EGFR) mutations. To assess the association between unsatisfactory outcomes and the quantity of DNA extracted from cytological versus histological samples.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: More effective treatments have become available for haematological malignancies from the early 2000s, but few large-scale population-based studies have investigated their effect on survival. Using EUROCARE data, and HAEMACARE morphological groupings, we aimed to estimate time trends in population-based survival for 11 lymphoid and myeloid malignancies in 20 European countries, by region and age. Methods: In this retrospective observational study, we included patients (aged 15 years and older) diagnosed with haematological malignancies, diagnosed up to Dec 31, 2007, and followed up to Dec 31, 2008. We used data from the 30 cancer registries (across 20 countries) that provided continuous incidence and good quality data from 1992 to 2007. We used a hybrid approach to estimate age-standardised and age-specific 5-year relative survival, for each malignancy, overall and for five regions (UK, and northern, central, southern, and eastern Europe), and four 3-year periods (1997–99, 2000–02, 2003–05, 2006–08). For each malignancy, we also estimated the relative excess risk of death during the 5 years after diagnosis, by period, age, and region. Findings: We analysed 560 444 cases. From 1997–99 to 2006–08 survival increased for most malignancies: the largest increases were for diffuse large B-cell lymphoma (42·0% [95% CI 40·7–43·4] to 55·4% [54·6–56·2], p<0·0001), follicular lymphoma (58·9% [57·3–60·6] to 74·3% [72·9–75·5], p<0·0001), chronic myeloid leukaemia (32·3% [30·6–33·9] to 54·4% [52·5–56·2], p<0·0001), and acute promyelocytic leukaemia (50·1% [43·7–56·2] to 61·9% [57·0–66·4], p=0·0038, estimate not age-standardised). Other survival increases were seen for Hodgkin's lymphoma (75·1% [74·1–76·0] to 79·3% [78·4–80·1], p<0·0001), chronic lymphocytic leukaemia/small lymphocytic lymphoma (66·1% [65·1–67·1] to 69·0% [68·1–69·8], p<0·0001), multiple myeloma/plasmacytoma (29·8% [29·0–30·6] to 39·6% [38·8–40·3], p<0·0001), precursor lymphoblastic leukaemia/lymphoma (29·8% [27·7–32·0] to 41·1% [39·0–43·1], p<0·0001), acute myeloid leukaemia (excluding acute promyelocytic leukaemia, 12·6% [11·9–13·3] to 14·8% [14·2–15·4], p<0·0001), and other myeloproliferative neoplasms (excluding chronic myeloid leukaemia, 70·3% [68·7–71·8] to 74·9% [73·8–75·9], p<0·0001). Survival increased slightly in southern Europe, more in the UK, and conspicuously in northern, central, and eastern Europe. However, eastern European survival was lower than that for other regions. Survival decreased with advancing age, and increased with time only slightly in patients aged 75 years or older, although a 10% increase in survival occurred in elderly patients with follicular lymphoma, diffuse large B-cell lymphoma, and chronic myeloid leukaemia. Interpretation: These trends are encouraging. Widespread use of new and more effective treatment probably explains much of the increased survival. However, the persistent differences in survival across Europe suggest variations in the quality of care and availability of the new treatments. High-resolution studies that collect data about stage at diagnosis and treatments for representative samples of cases could provide further evidence of treatment effectiveness and explain geographic variations in survival.