Quantitative photoperiodic control of erect thallus production in Sargassum muticum

A photoperiodic response of erect thallus production has been quantified in Sargassum muticum. Young germlings were cultured under long-day (LD; 16:8 h) conditions at 16 degreesC, 75 mumol m(-2) s(-1) until they had 4-5 early blades after 60 days in culture. The young thalli were transferred to short-day (SD; 8:16 h) and night break (NB; 8:7.5:1:7.5 h) regimes. Up to 34.7% of the plants had produced erect thalli after 140 days in culture in the SD regime, but no erect thalli were formed in the NB regime. When plants were transferred from NB to SD regimes, erect thalli were initiated within 10 days, but continued to be produced in plants transferred from SD to NB. Therefore, the development of erect thalli in S. muticum is a genuine photoperiodic response, which is inhibited by NB treatments, but continues in a NB regime after sufficient induction in SD.

Quantitative studies of the optical and UV spectra of Galactic early B supergiants - I. Fundamental parameters

Aims. We undertake an optical and ultraviolet spectroscopic analysis of a sample of 20 Galactic B0-B5 supergiants of luminosity classes Ia, Ib, Iab, and II. Fundamental stellar parameters are obtained from optical diagnostics and a critical comparison of the model predictions to observed UV spectral features is made.

Quantitative DRIFTS investigation of possible reaction mechanisms for the water-gas shift reaction on high-activity Pt- and Au-based catalysts

The present work emphasizes the importance of including a full quantitative analysis when in situ operando methods are used to investigate reaction mechanisms and reaction intermediates. The fact that some surface species exchange at a similar rate to the reaction product during isotopic transients is a necessary but not sufficient criterion for participation as a key reaction intermediate. This is exemplified here in the case of highly active low-temperature water-gas shift (WGS) catalysts based on gold and platinum. Operando DRIFTS data, isotopic exchanges, and DRIFTS calibration curves relating the concentration of formate species to the corresponding DRIFTS band intensity were combined to obtain a quantitative measure of the specific rate of formate decomposition. Despite displaying a rapid isotopic exchange rate (sometimes as fast as that of the reaction product CO2), the concentration of formates seen by DRIFTS was found to account for at most only 10% of the CO2 produced under the experimental conditions reported herein. These new results obtained on Au/CeZrO4 and Pt/CeO2 preparations (which are among the most active low-temperature WGS catalysts reported to date), led to the same conclusions regarding the minor role of IR-observable formates as those obtained in the case of less active Au/Ce(La)O-2 and Pt/ZrO2 catalysts. (c) 2007 Elsevier Inc. All rights reserved.

A quantitative determination of reaction mechanisms from density functional theory calculations: Fischer-Tropsch synthesis on flat and stepped cobalt surfaces

We systematically investigated the mechanism of the C-1 + C-1 coupling reactions using density functional theory. The activation energies of C-1 + C-1 coupling and carbon hydrogenation reactions on both flat and stepped surfaces were calculated and analyzed. Moreover, the coverages of adsorbed C-1 species were estimated, and the reaction rates of all possible C-1 + C-1 coupling pathways were quantitatively evaluated. The results suggest that the reactions of CH2 + CH2 and CH3 + C at steps are most likely to be the key C-1 + C-1 coupling steps in FT synthesis on Co catalysts. The reactions of C-2 + C-1 and C-3 + C-1 coupling also were studied; the results demonstrate that in addition to the pathways of RCH + CH2 and RCH2 + C, the coupling of RC + C and RC + CH also may contribute to the chain growth after C-1. (C) 2008 Elsevier Inc. All rights reserved.

Quantitative surface-enhanced Raman spectroscopy

The purpose of this tutorial review is to show how surface-enhanced Raman (SERS) and resonance Raman (SERRS) spectroscopy have evolved to the stage where they can be used as a quantitative analytical technique. SER(R)S has enormous potential for a range of applications where high sensitivity needs to be combined with good discrimination between molecular targets, particularly since low cost, compact spectrometers can read the high signal levels that SER(R)S typically provides. These advantages over conventional Raman measurements come at the cost of increased complexity and this review discusses the factors that need to be controlled to generate stable and reproducible SER(R)S calibrations.

Quantitative surface-enhanced Raman spectroscopy of dipicolinic acid - towards rapid anthrax endospore detection

Dipicolinic acid (DPA) is an excellent marker compound for bacterial spores, including those of Bacillus anthracis ( anthrax). Surface-enhanced Raman spectroscopy (SERS) potentially has the sensitivity and discrimination needed for trace DPA analysis, but mixing DPA solutions with citrate-reduced silver colloid only yielded measurable SERS spectra at much higher (> 80 ppm) concentrations than would be desirable for anthrax detection. Aggregation of the colloid with halide salts eliminated even these small DPA bands but aggregation with Na2SO4(aq) resulted in a remarkable increase in the DPA signals. With sulfate aggregation even 1 ppm solutions gave detectable signals with 10 s accumulation times, which is in the sensitivity range required. Addition of CNS- as an internal standard allowed quantitative DPA analysis, plotting the intensity of the strong DPA 1010 cm(-1) band (normalised to the ca. 2120 cm(-1) CNS- band) against DPA concentration gave a linear calibration (R-2 = 0.986) over the range 0 - 50 ppm DPA. The inclusion of thiocyanate also allows false negatives due to accidental deactivation of the enhancing medium to be detected.

Rapid, quantitative analysis of ppm/ppb nicotine using surface-enhanced Raman scattering from polymer-encapsulated Ag nanoparticles (gel-colls)

Rapid, quantitative SERS analysis of nicotine at ppm/ppb levels has been carried out using stable and inexpensive polymer-encapsulated Ag nanoparticles (gel-colls). The strongest nicotine band (1030 cm(-1)) was measured against d(5)-pyridine internal standard (974 cm(-1)) which was introduced during preparation of the stock gel-colls. Calibration plots of I-nic/I-pyr against the concentration of nicotine were non-linear but plotting I-nic/I-pyr against [nicotine](x) (x = 0.6-0.75, depending on the exact experimental conditions) gave linear calibrations over the range (0.1-10 ppm) with R-2 typically ca. 0.998. The RMS prediction error was found to be 0.10 ppm when the gel-colls were used for quantitative determination of unknown nicotine samples in 1-5 ppm level. The main advantages of the method are that the gel-colls constitute a highly stable and reproducible SERS medium that allows high throughput (50 sample h(-1)) measurements.

A New Concept of Interprofessional Education in Planning Programmes: Reflections on Healthy Urban Planning Project

Although widely debated, some of the defining professional characteristics of planners appear to be competencies in co-ordination, mediation and multidisciplinary working. Despite this, there is little pedagogical reflection on how interprofessional skills are promoted in planning programmes. This paper reflects on the experience of bringing together undergraduate students from medicine and planning to explore the concept of Healthy Urban Planning in a real life context of an urban motorway extension. This reveals a number of unexpected outcomes of such collaboration and points to the value of promoting interprofessional education, both as a way of increasing interest in some of the key challenges now facing society and in order to induce greater professional reflection amongst our students.

A New Concept of Interprofessional Education in Planning Programmes: Reflections on a Healthy Urban Planning Project

Although widely debated, some of the defining professional characteristics of planners appear to be competencies in co-ordination, mediation and multidisciplinary working. Despite this, there is little pedagogical reflection on how interprofessional skills are promoted in planning programmes. This paper reflects on the experience of bringing together undergraduate students from medicine and planning to explore the concept of Healthy Urban Planning in a real life context of an urban motorway extension. This reveals a number of unexpected outcomes of such collaboration and points to the value of promoting interprofessional education, both as a way of increasing interest in some of the key challenges now facing society and in order to induce greater professional reflection amongst students.

Measurement of Quenching Coefficients and Developement of Calibration Methods for Quantitative Spectroscopy of Plasma at Elevated Pressures

Measurements of collisional de-excitation (quenching) coefficients required for the interpretation of emission and fluorescence spectroscopic measurements are reported. Particular attention is turned on argon transitions which are of interest for actinometric determinations of atomic ground state populations and on fluorescence lines originating from excited atoms and noble gases in connection with two-photon excitation (TALIF) of atomic radicals. A novel method is described which allows to infer quenching coefficients for collisions with molecular hydrogen of noble gas states in the energy range up to 24 eV. The excitation is performed in these experiments by collisions of energetic electrons in the sheath of an RF excited hydrogen plasma during the field reversal phase which lasts about 10 ns. We describe in addition a calibration method - including quenching effects - for the determination by TALIF of absolute atomic radical densities of hydrogen, nitrogen and oxygen using two-photon resonances in noble gases close by the resonances of the species mentioned. The paper closes with first ideas on a novel technique to bypass quenching effects in TALIF by introducing an additional, controllable loss by photoionization that will allow quenching-free determination of absolute atomic densities with prevalent nanosecond laser systems in situations where collisional de-excitation dominates over spontaneous emission.

Testing the reliability of the JEOL FEGSEM 6500F electron microprobe for quantitative major element analysis of glass shards from rhyolitic tephra.

Electronprobe microanalysis is now widely adopted in tephra studies as a technique for determining the major element geochemistry of individual glass shards. Accurate geochemical characterization is crucial for enabling robust tephra-based correlations; such information may also be used to link the tephra to a specific source and often to a particular eruption. In this article, we present major element analyses for rhyolitic natural glass standards analysed on three different microprobes and the new JEOL FEGSEM 6500F microprobe at Queen’s University Belfast. Despite the scatter in some elements, good comparability is demonstrated among data yielded from this new system, the previous Belfast JEOL-733 Superprobe, the JEOL-8200 Superprobe (Copenhagen) and the existing long-established microprobe facility in Edinburgh. Importantly, our results show that major elements analysed using different microprobes and variable operating conditions allow two high-silica glasses to be discriminated accurately.

Fast, quantitative nucleoside protection under solvent-free conditions

Persilylation of nucleoside hydroxyls was effected in quantitative yields under solvent-free conditions using a ball mill. In addition, one-pot persilylation and acylation of cytidine was performed as an exemplar reaction demonstrating the utility of solvent-free approaches to nucleoside chemistry.

Where there is smoke, there is (the potential for) fire: soft indicators of research and policy impact

There is a growing literature examining the impact of research on informing policy, and of research and policy on practice. Research and policy do not have the same types of impact on practice but can be evaluated using similar approaches. Sometimes the literature provides a platform for methodological debate but mostly it is concerned with how research can link to improvements in the process and outcomes of education, how it can promote innovative policies and practice, and how it may be successfully disseminated. Whether research-informed or research-based, policy and its implementation is often assessed on such 'hard' indicators of impact as changes in the number of students gaining five or more A to C grades in national examinations or a percentage fall in the number of exclusions in inner city schools. Such measures are necessarily crude, with large samples smoothing out errors and disguising instances of significant success or failure. Even when 'measurable' in such a fashion, however, the impact of any educational change or intervention may require a period of years to become observable. This paper considers circumstances in which short-term change may be implausible or difficult to observe. It explores how impact is currently theorized and researched and promotes the concept of 'soft' indicators of impact in circumstances in which the pursuit of conventional quantitative and qualitative evidence is rendered impractical within a reasonable cost and timeframe. Such indicators are characterized by their avowedly subjective, anecdotal and impressionistic provenance and have particular importance in the context of complex community education issues where the assessment of any impact often faces considerable problems of access. These indicators include the testimonies of those on whom the research intervention or policy focuses (for example, students, adult learners), the formative effects that are often reported (for example, by head teachers, community leaders) and media coverage. The collation and convergence of a wide variety of soft indicators (Where there is smoke …) is argued to offer a credible means of identifying subtle processes that are often neglected as evidence of potential and actual impact (… there is fire).