Using choice experiments to explore the spatial distribution of willingness to pay for rural landscape improvements

We report findings from a choice experiment survey designed to estimate the economic benefits of policy measures to improve the rural landscape in the Republic of Ireland. Using a panel mixed logit specification to account for unobserved taste heterogeneity we derived individual-specific willingness-to-pay (WTP) estimates for each respondent in the sample. We subsequently investigated the spatial dependence of these estimates. Results suggest the existence of positive spatial autocorrelation for all rural landscape attributes. As a means of benefit transfer, kriging methods were employed to interpolate WTP estimates across the whole of the Republic of Ireland. The kriged WTP surfaces confirm the existence of spatial dependence and illustrate the implied spatial variation and regional disparities in WTP for all the rural landscape improvements investigated.

Comparisons of plankton at 59 degrees N and 37 degrees N during two Lagrangian drift experiments in the North Atlantic in June and July 1996

Data are summarised for two Lagrangian experiments in the North Atlantic in early summer 1996. At 59 degreesN 20 degreesW, plankton dynamics was studied in an SF, tracer release experiment within a mesoscale eddy over a 9-day period. At 37 degreesN 20 degreesW, a second experiment followed a drifting buoy for 7 days. The data obtained in these two experiments have been averaged for 3 depth strata; the euphotic zone, the surface mixed layer (SML), and the seasonal thermocline immediately beneath the surface mixed layer. At 59 degreesN, the euphotic zone was only marginally deeper than the SML, but at 37 degreesN the SML was ca 30 m and the euphotic depth was ca 110 m. At 37 degreesN, nutrient concentrations in the SML were low but significant new production occurred in the thermocline because of light penetration into the nutricline. The particulate organic carbon (POC) concentration of the SML at 59 degreesN was 13-15 mu mol C kg(-1), but at 37 degreesN POC concentrations were 4 mu mol C kg(-1). These POC measurements include biota and detritus. As a way of investigating latitudinal differences in the plankton communities, estimates have been made of the carbon and nitrogen content of phytoplankton, bacterioplankton, microzooplankton and mesozooplankton. At both 59 degreesN and 37 degreesN, phytoplankton was the largest component, accounting for ca 50% of the planktonic biomass in the SML. At 59 degreesN, microzooplankton was 16% of the planktonic carbon, but at 37 degreesN this reduced to 8% of the total. Mesozooplankton was a relatively constant proportion (ca 20%) of the planktonic carbon in the SML at both 59 degreesN and 37 degreesN. Bacterioplankton was 14% of the biomass at 59 degreesN, increasing to 24% in the microbial loop-dominated system at 37 degreesN. Mean carbon fixation rate in the oligotrophic southern station was 24% of that at the north, with more carbon fixation below the SML at 37 degreesN than at 59 degreesN. Respiration rates showed little variation with latitude, and the rates at 37 degreesN were 80% of those at 59 degreesN. Nitrate and ammonium uptake rates were very low in the oligotrophic conditions in the SML at 37 degreesN, but nitrate uptake in the euphotic zone was comparable to that at 59 degreesN. Ammonium uptake by phytoplankton was also significantly greater at 37 degreesN, in both the euphotic zone and thermocline, but uptake in the SML was only 20% of that in the SML at 59 degreesN. (C) 2001 Elsevier Science Ltd. All rights reserved.

Size Effects on Thin Film Ferroelectrics: Experiments on Isolated Single Crystal Sheets

Thin lamellae were cut from bulk single crystal BaTiO3 using a Focused Ion Beam Microscope. They were then removed and transferred onto single crystal MgO substrates, so that their functional properties could be measured independent of the original host bulk ferroelectric. The temperature dependence of the capacitance of these isolated single crystal films was found to be strongly bulk-like, demonstrating a sharp Curie anomaly, as well as Curie-Weiss behaviour. In addition, the sudden change in the remanent polarisation as a function of temperature at TC was characteristic of a first order phase change. The work represents a dramatic improvement on that previously published by M. M. Saad, P. Baxter, R. M. Bowman, J. M. Gregg, F. D. Morrison & J. F. Scott, J. Phys: Cond. Matt., 16 L451-L456 (2004), as critical shortcomings in the original specimen geometry, involving potential signal contributions from bulk BaTiO3, have now been obviated. That the functional properties of single crystal thin film lamellae are comparable to bulk, and not like those of conventionally deposited heteroegenous thin film systems, has therefore been confirmed.

Comparison between fluid simulations and experiments in inductively coupled argon/chlorine plasmas

Comparisons of 2D fluid simulations with experimental measurements of Ar/Cl-2 plasmas in a low-pressure inductively coupled reactor are reported. Simulations show that the wall recombination coefficient of Cl atom (gamma) is a crucial parameter of the model and that neutral densities are very sensitive to its variations. The best agreement between model and experiment is obtained for gamma = 0.02, which is much lower than the value predicted for stainless steel walls (gamma = 0.6). This is consistent with reactor wall contaminations classically observed in such discharges. The electron density, negative ion fraction and Cl atom density have been investigated under various conditions of chlorine and argon concentrations, gas pressure and applied rf input power. The plasma electronegativity decreases with rf power and increases with chlorine concentration. At high pressure, the power absorption and distribution of charged particles become more localized below the quartz window. Although the experimental trends are well reproduced by the simulations, the calculated charged particle densities are systematically overestimated by a factor of 3-5. The reasons for this discrepancy are discussed in the paper.

Voltammetric studies of gold, protons, and [HCl2](-) in ionic liquids

The comparative study of the voltammetry of H[NTf2], HCl and H[AuCl4] in [C(4)mim][NTf2] has provided an insight into the influence of protons on the reduction of [AuCl4](-) at Au, Pt or glassy carbon (GC) electrodes, and has allowed the identification of an unprecedented proton-induced electroless deposition of Au on relatively inert GC surfaces. For the first time, clear evidence of the quantitative formation of [HCl2](-) has been obtained in HCl/[C(4)mim][NTf2] mixtures, and the electrochemical behavior of these mixtures analyzed. In particular, a significant shift of the dissociation equilibrium toward the formation of chloride and the solvated proton (H-IL(+)), following electrochemical reduction of H-IL(+) has been observed in the time-scale of the experiments.

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu²⁺ and Ni²⁺ from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5–100 mg/L. The pH of the solutions containing either Cu²⁺ or Ni²⁺ was varied over a range of 2–8. The adsorption of Cu²⁺ and Ni⁺² on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu²⁺ and 14.5 mg/g for Ni²⁺ at 298 K when the initial concentration for both Cu²⁺ and Ni²⁺ was 100 mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2 mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.

Adsorption of Zn(ii), Pb(ii), and Co(ii) using natural sorbents: equilibrium and kinetic studies.

Water Research, 40 14 (2006) 2645.

Adsorption of methylene blue onto activated carbon produced from steam activated bituminous coal: A study of equilibrium adsorption isotherm.

Chemical Engineering Journal, 124 (2006) 103.

Adsorption of basic dyes from aqueous solution onto activated carbons

The aim of this research is to compare the adsorption capacity of different types of activated carbons produced by steam activation in small laboratory scale and large industrial scale processes. Equilibrium behaviour of the activated carbons was investigated by performing batch adsorption experiments using bottle-point method. Basic dyes (methylene blue (MB), basic red (BR) and basic yellow (BY)) were used as adsorbates and the maximum adsorptive capacity was determined. Adsorption isotherm models, Langmuir, Freundlich and Redlich-Peterson were used to simulate the equilibrium data at different experimental parameters (pH and adsorbent particle size). It was found that PAC2 (activated carbon produced from New Zealand coal using steam activation) has the highest adsorptive capacity towards MB dye (588 mg/g) followed by F400 (476 mg/g) and PAC 1 (380 mg/g). BR and BY showed higher adsorptive affinity towards PAC2 and F400 than MB. Under comparable conditions, adsorption capacity of basic dyes, MB, BR and BY onto PAC 1, PAC2 and F400 increased in the order: MB <BR <BY. Redlich-Peterson model was found to describe the experimental data over the entire range of concentration under investigation. All the systems show favourable adsorption of the basic dyes with 0 <R-L <I (C) 2007 Elsevier B.V. All rights reserved.

COD removal from textile industry effluent: pilot plant studies

This work involved the treatment of industrial waste water from a nylon carpet printing plant. As dyeing of nylon is particularly difficult, acid dyes, fixing agents, thickeners, finishing agents, are required for successful colouration and cause major problems with the plant's effluent disposal in terms of chemical oxygen demand (COD). Granular activated carbon (GAC) Filtrasorb 400 was used to treat a simulated process plant effluent containing all the pollutants. Equilibrium isotherm experiments were established and experimental data obtained showed good empirical correlation with Langmuir isotherm theory. Column experimental data, in terms of COD were correlated using the bed depth service time (BDST) model. Solid phase loading in the columns were found to approach that in equilibrium studies indicating an efficient use of adsorbent. The results from the BDST model were then used to design a pilot adsorption rig at the plant. The performance of the pilot plant column were accurately predicted by scale-up from the bench scale columns. (C) 2001 Elsevier Science BN. All rights reserved.