Developing Frameworks for School Self-Evaluation to Improve School Effectiveness for Peace in Northern Ireland

This article contributes towards redefining school improvement more broadly than conventional outcomes sometimes imply, and describes original and practical applications of school self-evaluation models. The significance of the work has been acknowledged by reviewers in the school improvement and peacebuilding and development fields. As a result of the research reported here, Smith was invited to support the work of the Department for Education Northern Ireland Schools Community Relations Panel and the Community Relations officers representing the five Education and Library Boards. The latter used the self-evaluation framework as a model for developing a regional whole-school self-evaluation document. Smith was the lead author of the paper.

Willingness to use functional breads. Applying the Health Belief Model across four European countries

The present study focused on the role of the Health Belief Model (HBM) in predicting willingness to use functional breads, across four European countries: UK (N = 552), Italy (N = 504), Germany (N = 525) and Finland (N = 513). The behavioural evaluation components of the HBM (the perceived benefits and barriers conceptualized respectively as perceived healthiness and pleasantness) and the health motivation component were good predictors of willingness to use functional breads whereas threat perception components (perceived susceptibility and perceived anticipated severity) failed as predictors. This result was common in all four countries and across products. The role of 'cue to action' was marginal. On the whole the HBM fit was similar across the countries and products in terms of significant predictors (the perceived benefits, barriers and health motivation) with the exception of self-efficacy which was significant only in Finland. Young consumers seemed more interested in the functional bread with a health claim promoting health rather than in reducing risk of disease, whereas the opposite was true for older people. However, functional staple foods, such as bread in this European study, are still perceived as common foods rather than as a means of avoiding diseases. Consumers seek these foods for their healthiness (the perceived benefits) as they expect them to be healthier than regular foods and for the pleasantness (the perceived barriers) as they do not expect any change in the sensory characteristics due to the addition of the functional ingredients. The importance of health motivation in willingness to use products with health claims implies that there is an opening for developing better models for explaining health-promoting food choices that take into account both food and health-related factors without making a reference to disease-related outcome. (C) 2008 Elsevier Ltd. All rights reserved.

Assessment framework for construction supply chain relationships: Development and evaluation

The change of supply chain relationships from the traditional adversarial to the collaborative has been increasing in the UK construction industry. To reflect this change, some attempts have been made to establish models for measuring and improving supply chain relationships in construction. However, there are obvious deficiencies in these existing models. This highlights the need for a systematic model for the assessment of construction supply chain relationships. Based on a review of the literature and an expert group discussion, an assessment framework is developed in this paper, which consists of assessment criteria, relationship levels, detailed descriptions, assessment classes and assessment procedures. The proposed framework is evaluated through expert interviews and case studies. This framework provides a roadmap for the improvement of supply chain relationships. It can help construction organisations to position their current relationship and identify key areas for relationship improvement in the future.

Rheological Evaluation of the Isothermal Cure Characteristics of Medical Grade Silicone Elastomers

Silicone elastomer systems have been shown to offer potential for the fabrication of medical devices and sustained release drug delivery devices comprising low molecular weight drugs and protein therapeutics. For drug delivery systems in particular, there is often no clear rationale for selection of the silicone elastomer grade, particularly in respect of optimizing the manufacturing conditions to ensure thermal stability of the active agent and short cycle times. In this study, the cure characteristics of a range of addition-cure and condensation-cure, low-consistency, implant-grade silicone elastomers, either as supplied or loaded with the model protein bovine serum albumin (BSA) and the model hydrophilic excipient glycine, were investigated using oscillatory rheology with a view to better understanding the isothermal cure characteristics. The results demonstrate the influence of elastomer type, cure temperature, protein loading, and glycine loading on isothermal cure properties. By measuring the cure time required to achieve tan delta values representative of early and late-stage cure conditions, a ratio t(1)/t(2) was defined that allowed the cure characteristics of the various systems to be compared. Sustained in vitro release of BSA from glycine-loaded silicone elastomer covered rod devices was also demonstrated over 14 days. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 116: 2320-2327, 2010

Evaluation of effective groundwater recharge of freshwater lens in small islands by the combined modeling of geoelectrical data and water heads

In small islands, a freshwater lens can develop due to the recharge induced by rain. Magnitude and spatial distribution of this recharge control the elevation of freshwater and the depth of its interface with salt water. Therefore, the study of lens morphology gives useful information on both the recharge and water uptake due to evapotranspiration by vegetation. Electrical resistivity tomography was applied on a small coral reef island, giving relevant information on the lens structure. Variable density groundwater flow models were then applied to simulate freshwater behavior. Cross validation of the geoelectrical model and the groundwater model showed that recharge exceeds water uptake in dunes with little vegetation, allowing the lens to develop. Conversely, in the low-lying and densely vegetated sectors, where water uptake exceeds recharge, the lens cannot develop and seawater intrusion occurs. This combined modeling method constitutes an original approach to evaluate effective groundwater recharge in such environments.
[Comte, J.-C., O. Banton, J.-L. Join, and G. Cabioch (2010), Evaluation of effective groundwater recharge of freshwater lens in small islands by the combined modeling of geoelectrical data and water heads, Water Resour. Res., 46, W06601, doi:10.1029/2009WR008058.]

A Cluster Randomized Controlled Trial of an Adapted U.S. Model of Pharmaceutical Care for Nursing Home Residents in Northern Ireland (Fleetwood Northern Ireland Study): A Cost-Effectiveness Analysis

OBJECTIVES: To evaluate the cost-effectiveness of an adapted U.S. model of pharmaceutical care to improve psychoactive prescribing for nursing home residents in Northern Ireland (Fleetwood NI Study).
DESIGN: Economic evaluation alongside a cluster randomized controlled trial.
SETTING: Nursing homes in NI randomized to intervention (receipt of the adapted model of care; n511) or control (usual care continued; n511).
PARTICIPANTS: Residents aged 65 and older who provided informed consent (N5253; 128 intervention, 125 control) and who had full resource use data at 12 months.
INTERVENTION: Trained pharmacists reviewed intervention home residents’ clinical and prescribing information for 12 months, applied an algorithm that guided them in assessing the appropriateness of psychoactive medication, and worked with prescribers (general practitioners) to make changes. The control homes received usual care in which there was no pharmacist intervention.
MEASUREMENTS: The proportion of residents prescribed one or more inappropriate psychoactive medications (according to standardized protocols), costs, and a cost-effectiveness acceptability curve. The latter two outcomes are the focus for this article.
RESULTS: The proportions of residents receiving inappropriate psychoactive medication at 12 months in the intervention and control group were 19.5% and 50.4%, respectively. The mean cost of healthcare resources used per resident per year was $4,923 (95% con?dence interval.

Evaluation of leukocyte dynamic in mouse retinal circulation with scanning laser ophthalmoloscopy (Video report)

http://bjo.bmj.com/content/suppl/2001/06/20/85.7.DC1 Leukocyte-endothelial cell interactions play an important role in the pathogenesis of various types of retinal vascular diseases, including diabetes, uveitis, and ischemic lesions. Over the last few years, several methods have been devised in which the scanning laser ophthalmoscope (SLO) is used to study leukocyte-endothelial interactions in vivo [1,2]. Previously we reported a noninvasive in vivo leukocyte tracking method using the SLO in rat. In this method, a nontoxic fluorescent agent (6-carboxyfluorescein diacetate, CFDA) was used to label leukocytes in vitro. Leukocyte velocities within the retinal and choroidal circulations were be quantified simultaneously [3]. None of the previous methods has been developed for imaging the murine fundus, mainly due to problems arising from the small size of the mouse eye. However, there are many advantages of using a murine model to study retinal vascular diseases such as enhanced genetic definition, increased range of reagents available for immunological studies and cost reduction. We have developed our SLO method such that we can track leukocytes in the mouse retinal and choroidal circulations.

Highly accurate and efficient evaluation of randomising set index functions

Randomising set index functions can reduce the number of conflict misses in data caches by spreading the cache blocks uniformly over all sets. Typically, the randomisation functions compute the exclusive ors of several address bits. Not all randomising set index functions perform equally well, which calls for the evaluation of many set index functions. This paper discusses and improves a technique that tackles this problem by predicting the miss rate incurred by a randomisation function, based on profiling information. A new way of looking at randomisation functions is used, namely the null space of the randomisation function. The members of the null space describe pairs of cache blocks that are mapped to the same set. This paper presents an analytical model of the error made by the technique and uses this to propose several optimisations to the technique. The technique is then applied to generate a conflict-free randomisation function for the SPEC benchmarks. (C) 2003 Elsevier Science B.V. All rights reserved.

Improving multi-site benefit functions via Bayesian model averaging: A new approach to benefit transfer

A benefit function transfer obtains estimates of willingness-to-pay (WTP) for the evaluation of a given policy at a site by combining existing information from different study sites. This has the advantage that more efficient estimates are obtained, but it relies on the assumption that the heterogeneity between sites is appropriately captured in the benefit transfer model. A more expensive alternative to estimate WTP is to analyze only data from the policy site in question while ignoring information from other sites. We make use of the fact that these two choices can be viewed as a model selection problem and extend the set of models to allow for the hypothesis that the benefit function is only applicable to a subset of sites. We show how Bayesian model averaging (BMA) techniques can be used to optimally combine information from all models. The Bayesian algorithm searches for the set of sites that can form the basis for estimating a benefit function and reveals whether such information can be transferred to new sites for which only a small data set is available. We illustrate the method with a sample of 42 forests from U.K. and Ireland. We find that BMA benefit function transfer produces reliable estimates and can increase about 8 times the information content of a small sample when the forest is 'poolable'. © 2008 Elsevier Inc. All rights reserved.

A Randomized Controlled Trial Evaluation of Time to Read, a Volunteer Tutoring Program for 8-9 Year Olds

Tutoring is commonly employed to prevent early reading failure, and evidence suggests that it can have a positive effect. This article presents findings from a large-scale (n = 734) randomized controlled trial evaluation of the effect of Time to Read—a volunteer tutoring program aimed at children aged 8 to 9 years—on reading comprehension, self-esteem, locus of control, enjoyment of learning, and future aspirations. The study found that the program had only a relatively small effect on children’s aspirations (effect size +0.17, 95% confidence interval [0.015, 0.328]) and no other outcomes. It is suggested that this lack of evidence found may be due to misspecification of the program logic model and outcomes identified and program-related factors, particularly the low dosage of the program.

Development and application of a multiple linear regression model to consider the impact of weekly waste container capacity on the yield from kerbside recycling programmes

The paper describes the development and application of a multiple linear regression model to identify how the key elements of waste and recycling infrastructure, namely container capacity and frequency of collection affect the yield from municipal kerbside recycling programmes. The overall aim of the research was to gain an understanding of the factors affecting the yield from municipal kerbside recycling programmes in Scotland. The study isolates the principal kerbside collection service offered by 32 councils across Scotland, eliminating those recycling programmes associated with flatted properties or multi occupancies. The results of a regression analysis model has identified three principal factors which explain 80% of the variability in the average yield of the principal dry recyclate services: weekly residual waste capacity, number of materials collected and the weekly recycling capacity. The use of the model has been evaluated and recommendations made on ongoing methodological development and the use of the results in informing the design of kerbside recycling programmes. The authors hope that the research can provide insights for the ongoing development of methods to optimise the design and operation of kerbside recycling programmes.

An Evaluation of the Effectiveness of an FE/HE Partnership in the Delivery of a Preparation for Practice Module within an Undergraduate Social Work Degree Programme

The Preparation for Practice module at the University of Ulster is delivered to 170 first year students via a collaborative arrangement between higher and further education institutions. In each of the five sites, students receive large group and small group teaching facilitated by social work training agency workers and academic tutor dyads. An evaluation of the module sought the perceptions of the agency and academic facilitators regarding the overall collaborative arrangement and the model of co-teaching involving social work academics and agency partners. Respondents were asked to complete a semi-structured questionnaire, which generated data from a Likert scale and also invited qualitative commentary. The Likert scale data were analysed via SPSS and the qualitative information was scrutinised using a manual thematic analysis technique. Findings indicated that continuous communication, consistency in programme content and the acknowledgement of the differences in organisation resources were key to a successful collaborative arrangement. It was also noted that a co-teaching model should be viewed as a positive vehicle for achieving module objectives in a safe learning environment.

Influence of skin model on in vitro performance of drug-loaded soluble microneedle arrays

A plethora of studies have described the in vitro assessment of dissolving microneedle (MN) arrays for enhanced transdermal drug delivery, utilising a wide variety of model membranes as a representation of the skin barrier. However, to date, no discussion has taken place with regard to the choice of model skin membrane and the impact this may have on the evaluation of MN performance. In this study, we have, for the first time, critically assessed the most common types of in vitro skin permeation models - a synthetic hydrophobic membrane (Silescol(®) of 75 µm) and neonatal porcine skin of definable thickness (300-350 µm and 700-750 µm) - for evaluating the performance of drug loaded dissolving poly (methyl vinyl ether co maleic acid) (PMVE/MA) MN arrays. It was found that the choice of in vitro skin model had a significant effect on the permeation of a wide range of small hydrophilic molecules released from dissolving MNs. For example, when Silescol(®) was used as the model membrane, the cumulative percentage permeation of methylene blue 24h after the application of dissolvable MNs was found to be only approximately 3.7% of the total methylene blue loaded into the MN device. In comparison, when dermatomed and full thickness neonatal porcine skin were used as a skin model, approximately 67.4% and 47.5% of methylene blue loaded into the MN device was delivered across the skin 24h after the application of MN arrays, respectively. The application of methylene blue loaded MN arrays in a rat model in vivo revealed that the extent of MN-mediated percutaneous delivery achieved was most similar to that predicted from the in vitro investigations employing dermatomed neonatal porcine skin (300-350 µm) as the model skin membrane. On the basis of these results, a wider discussion within the MN community will be necessary to standardise the experimental protocols used for the evaluation and comparison of MN devices.

A proposed systems approach to the evaluation of integrated palliative care

Background. There is increasing global interest in regional palliative care networks (PCN) to integrate care, creating systems that are more cost-effective and responsive in multi-agency settings. Networks are particularly relevant where different professional skill sets are required to serve the broad spectrum of end-of-life needs. We propose a comprehensive framework for evaluating PCNs, focusing on the nature and extent of inter-professional collaboration, community readiness, and client-centred care. Methods. In the absence of an overarching structure for examining PCNs, a framework was developed based on previous models of health system evaluation, explicit theory, and the research literature relevant to PCN functioning. This research evidence was used to substantiate the choice of model factors. Results. The proposed framework takes a systems approach with system structure, process of care, and patient outcomes levels of consideration. Each factor represented makes an independent contribution to the description and assessment of the network. Conclusions. Realizing palliative patients' needs for complex packages of treatment and social support, in a seamless, cost-effective manner, are major drivers of the impetus for network-integrated care. The framework proposed is a first step to guide evaluation to inform the development of appropriate strategies to further promote collaboration within the PCN and, ultimately, optimal palliative care that meets patients' needs and expectations. © 2010 Bainbridge et al; licensee BioMed Central Ltd.

Resource utilisation and costs of palliative cancer care in an interdisciplinary health care model

This paper presents a detailed description of health care resource utilisation and costs of a pilot interdisciplinary health care model of palliative home care in Ontario, Canada. The descriptive evaluation entailed examining the use of services and costs of the pilot program: patient demographics, length of stay broken down by disposition (discharged, alive, death), access to services/resources, use of family physician and specialist services, and drug use. There were 434 patients included in the pilot program. Total costs were approximately CAN$2.4 million, and the cost per person amounted to approximately CAN$5586.33 with average length of stay equal to over 2 months (64.22 days). One may assume that length of stay would be influenced by the amount of service and support available. Future research might investigate whether in-home palliative home care is the most cost effective and suitable care setting for those patients requiring home care services for expected periods of time. © 2009 SAGE Publications.