Climate change adaptation : a decision support framework to encourage environmentally responsible behaviour

Structured Abstract:
Purpose: Very few studies investigate environmentally responsible behaviour (ERB). This paper presents a new 'Awareness Behaviour Intervention Action' (ABIA) Decision Support Framework to sustain ERB.

Design/methodology/approach: Previous ERB programmes have failed to deliver lasting results; they have not appropriately understood and provided systems to address ERB (Costanzo et al., 1986). These programmes were based on assumptions (Moloney et al., 2010), which this paper addresses. The ABIA Framework has been developed through a case study of social housing tenants waiting for low or zero carbon homes.

Findings: The ABIA Framework enables a better understanding of current attitudes to environmental issues and provides support for ERB alongside technological interventions employed to promote and sustain carbon reduction.

Research limitations/implications: The ABIA Framework should be tested on individuals and communities in a variety of socio-economic, political and cultural contexts. This will help unpack how it can impact on the behaviours of individuals and communities including stakeholders.

Practical implications: This type of research and the ABIA Framework developed from it are crucial if the UK pledge to become the first country in the World where all new homes from 2016 are to be zero carbon.

Social implications: The Framework encourages both individual and community discussion and solving of sustainability issues.

Originality/value: There are few, if any, studies that have developed a framework which can be used to support behavioural change for adaptation to sustainable living in low or zero carbon homes.

Susceptibility to environmentally induced cracking of laser-welded NiTi wires in Hanks’ solution at open-circuit potential

In the present study the tensile and super-elastic behaviours of laser-welded NiTi wires in Hanks’ solution at open-circuit potential (OCP) were investigated using tensile and cyclic slow-strain-rate tests (SSRT). In comparison with NiTi weldment tested in oil (non-corrosive environment), the weldment in Hanks’ solution suffered from obvious degradation in the tensile properties as evidenced by lower tensile strength, reduced maximum elongation, and a brittle fracture mode. Moreover, a larger residual strain was observed in the weldment after stress–strain cycles in Hanks’ solution. In addition to the microstructural defects resulting from the welding process, the inferior tensile and super-elastic behaviours of the NiTi weldment in Hanks’ solution could be attributed to the trapping of a large amount of hydrogen in the weld zone and heat-affected zone.

Reduction of environmentally induced cracking of laser-welded shape memory NiTi wires via post-weld heat-treatment

In this study, the environmentally induced cracking behaviour of the NiTi weldment with and without post-weld heat-treatment (PWHT) in Hanks’ solution at 37.5 °C at OCP were studied by tensile and cyclic slow-strain-rate tests (SSRT), and compared with those tested in oil (an inert environment). Our previous results in the tensile and cyclic SSRT showed that the weldment without PWHT showed high susceptibility to the hydrogen cracking, as evidenced by the degradation of tensile and super-elastic properties when testing in Hanks' solution. The weldment after PWHT was much less susceptible to hydrogen attack in Hanks' solution as no obvious degradation in the tensile and super-elastic properties was observed, and only a very small amount of micro-cracks were found in the fracture surface. The susceptibility to hydrogen cracking of the NiTi weldment could be alleviated by applying PWHT at the optimized temperature of 350 °C after laser welding.

Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry

The concept of green concrete has been progressively introduced in concrete technology. At the same time, new generations of superplasticisers have become widely available and self-compacting concrete is being increasingly implemented. The aim of this research is to study the impact that different sustainable materials have on both fresh and hardened properties of Self-Compacting Fibre Reinforced Concrete (SCFRC) in order to implement their use in a precast concrete company. Different combinations of cement, mineral additions (active and inert), polypropylene fibres, superplasticisers, and aggregates have been considered. Fresh state performance has been assessed by means of: slump flow test, V-funnel, and J-ring. Concrete compressive strength values at different ages have been retained as representative of the material's performance in its hardened state. All these properties have been correlated with SCFRC proportioning parameters. The importance of interactions between mineral additions and between these and superplasticiser is emphasised, as well as the different consequences of using powders as cement replacement or as mineral additions.

Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry (PDF Download Available). Available from: http://www.researchgate.net/publication/263304799_Optimisation_of_Environment-friendly_SCFRC_mixes_use_in_precast_Concrete_Industry [accessed Jun 5, 2015].

"...and they won land among the Picts by friendly treaty or the sword": How a re-examination of early historical sources and an analysis of early medieval settlement in north Co. Antrim confirms the validity of traditional accounts of Dál Riatic migration to Scotland from Ulster

Much recent scholarship has been critical of the concept of a Dál Riatic migration to, or colonisation of, Argyll. Scepticism of the accuracy of the early medieval accounts of this population movement, arguing that these are late amendments to early sources, coupled with an apparent lack of archaeological evidence for such a migration have led to its rejection. It is argued here, however, that this rejection has been based on too narrow a reading of historical sources and that there are several early accounts which, while differing in detail, agree on one point of substance, that the origin of Scottish Dál Riata lies in Ireland. Also, the use of archaeological evidence to suggest no migration to Argyll by the Dál Riata is flawed, misunderstanding the nature of early migrations and how they might be archaeologically identified, and it's proposed that there is actually quite a lot of evidence for migration to Argyll by the Dál Riata, in the form of settlement and artefactural evidence, but that it is to be found in Ireland through the mechanism of counterstream migration, rather than in Scotland.

Semiconductor photocatalysis: an environmentally acceptable alternative production technique and effluent treatment process

New environmentally acceptable production methods are required to help reduce the environmental impact of many industrial processes. One potential route is the application of photocatalysis using semiconductors. This technique has enabled new environmentally acceptable synthetic routes for organic synthesis which do not require the use of toxic metals as redox reagents. These photocatalysts also have more favourable redox potentials than many traditional reagents. Semiconductor photocatalysis can also be applied to the treatment of polluted effluent or for the destruction of undesirable by-products of reactions. In addition to the clean nature of the process the power requirements of the technique can be relatively low, with some reactions requiring only sunlight. 

Listening to ‘Generation Jacobs’; A Case Study in Participative Engagement for a Child-Friendly City

This paper reflects on the enduring value of Jane Jacobs’ Life and Death of American Cities in the context of Child-Friendly Cities. This is explored through a project in Belfast which has engaged primary school children in how they understand their local environment. This shows that while children can effectively contribute to policy debates, there is a need to express this in a way that can be more effectively assimilated into planning debates. The paper reflects on this experience, suggesting that ‘Generation Jacobs’ could be used as a rhetorical device to frame children’s needs in a way that can be better understood by the planning profession.

Navigating and exploring the ASD-friendly landscape

As a society we have a responsibility to provide an inclusive built environment. For those with Autistic Spectrum Disorder (ASD) however, the world can be a frightening, difficult and confusing place. The challenge of integrating more fully into society can be distanced by an alienating built environment. This is particularly debilitating for younger children who can find themselves detached from learning and interaction with their peers by uncomfortable surroundings. Subsequently there has been a growing interest in promoting ASD-friendly environments, especially in a school setting. Strategies to date have generally followed a widely accepted reductionist or generalist approach. However, the authors now contend that there needs to be a greater discussion of what truly constitutes an ASD-friendly environment, in conjunction with investigating what strategies best articulate a progressive approach to supporting those, and especially the young, with ASD in our built environment. Hence this paper first introduces some of the challenges faced by those with ASD in trying to cope with their surroundings. It then outlines a triad of challenges to overcome when considering what truly constitutes an ASD-friendly environment. The authors then highlight the need and advantage of supporting change and adaption in our shared inhabited landscape through providing both choice and reassurance for the child with ASD. It is hoped that by increasing awareness and then questioning what genuinely constitutes an ASD-friendly environment, it might ultimately help facilitate greater inclusion of the ASD child into mainstream education and society at large.

Thermal environments and comfort in dementia friendly dwellings

This study follows on from a research project that developed guidelines for the Universal Design (UD) of Dementia Friendly Dwellings for People with Dementia, their Families and Carers. Research findings point to the need for thermal environments that support people with dementia and do not provoke stress, agitation or anxiety. Using semi-structured interviews and qualitative analysis of people with dementia this paper aims to provide insight into the questions of appropriate thermal environments. The qualitative analysis is supported by example simulated indoor environment studies that investigate comfort in common thermal environment provision scenarios in the homes of people with dementia. This paper focuses on the thermal environment, its impact on people with dementia, its therapeutic value, and its role in encouraging engagement in every day activity.
Findings from the interviews emphasize that control over their own internal environment is a priority for people with dementia. A strong preference for naturally or passively conditioned environments over mechanical conditioning is evident. Preferences are expressed for naturally ventilated environments enabling occupant instigated air movement. Repeated emphasis is placed on familiar elements including the fire and hot water bottle. Little desire is expressed for information feedback or technological displays.