Analysis of the nearshore wave energy resource

Earlier studies have indicated that the gross nearshore wave energy resource is significantly smaller than the gross offshore wave energy resource implying that the deployment of wave energy converters in the nearshore is unlikely to be economic. However, it is argued that the gross wave energy resource is not an appropriate measure for determining the productivity of a wave farm and an alternative measure, the exploitable wave energy resource, is proposed. Calculation of a site's potential using the exploitable wave energy resource is considered superior because it accounts for the directional distribution of the incident waves and the wave energy plant rating that limits the power capture in highly energetic sea-states. A third-generation spectral wave model is used to model the wave transformation from deep water to a nearshore site in a water depth of 10 m. It is shown that energy losses result in a reduction of less than 10% of the net incident wave power. Annual wave data for the North Atlantic coast of Scotland is analysed and indicates that whilst the gross wave energy resource has reduced significantly by the 10 m depth contour, the exploitable wave energy resource is reduced by 7 and 22% for the two sites analysed. This limited reduction in exploitable wave energy resource means that for many exposed coasts, nearshore sites offer similar potential for exploitation of the wave energy resource as offshore sites.

The effect of statistics anxiety on students’ predicted and actual test scores

This study investigated the effect of statistics anxiety and attitudes on first year psychology students’ predicted and actual statistics class test scores. A total of 52 students completed the Statistics Anxiety Rating Scale and estimated their class test scores one week before their test at the end of first year. Regression models were conducted with the six attitude and anxiety subscales as predictors and the predicted and actual test scores as criterion variables. The results showed that computation self concept and fear of asking for help accounted for 37% of the variance in predicted test scores. However, when actual test scores were analysed the significant predictors were worth of statistics and interpretation anxiety, which accounted for 20% of the variance. These results suggested that while statistics anxiety does influence students’ perceptions of their competence it appears to have less effect on their actual performance. Results also suggested that students were unaware of their own statistical competence. Remedial action is required to address the level of statistics anxiety experienced by first year undergraduate psychology students, as it appears to result in unrealistic assessments of their ability and has detrimental effects on their statistics self-efficacy.

The mental health needs of people with a learning disability detained in police custody

Few research studies examine the prevalence or mental health needs of people with a Learning Disability (LD) detained in police custody. This paper describes the population of detainees with an LD who presented to an inner city inter-agency police liaison service during a three-year period. Two forensically trained Community Mental Health Nurses (CMHNs) screened all custody record forms (n=9014) for evidence of a mental health problem or LD. The CMHNs interviewed positively screened detainees (n=1089) using a battery of measures designed to assess mental health status, risk-related behaviour and alcohol or drug abuse. Almost one-in-ten of those interviewed (95/1089) were judged to have a possible or definite LD. Fifty-two per cent were cases on the General Health Questionnaire (GHQ) whilst 61% attained 'above threshold' Brief Psychiatric Rating Scale (BPRS) scores. The majority (63%) had a history of causing harm to others while 56 per cent had a history of self-harm. More than half (56%) regularly consumed harmful levels of alcohol while one-in-four (27%) reported abusing drugs. Higher than expected numbers of detainees have a learning disability and most have complex mental health needs. A police liaison service offers a way of identifying people with LD and connecting them with appropriate health and social care agencies.

Long-term occlusal and soft-tissue profile outcomes after treatment of Class II Division 1 malocclusion with fixed appliances

Introduction: Our objective was to determine which factors were predictive of good long-term outcomes after fixed appliance treatment of Class II Division 1 malocclusion. Methods: Two hundred seven patients with Class II Division 1 malocclusion were examined in early adulthood at a mean of 4.6 years after treatment with fixed appliances. The peer assessment rating index was used to evaluate dental alignment and occlusal relationships. The soft-tissue profile was assessed with the Holdaway angle. Results: Logistic regression identified 3 pretreatment variables that were predictive of a good facial profile (Holdaway angle) at recall: the lower lip to E-plane distance (P

Rapid construction of arch bridges using the innovative FlexiArch

Masonry arches are strong, durable, aesthetically pleasing and largely maintenance free, yet since 1900 there has been a dramatic decline in their use. However, designers, contractors and clients now have access to a new method of constructing arches incorporating precast concrete voussoirs interconnected via polymeric reinforcement and a concrete screed. No centring is necessary, as the FlexiArch, when it is lifted, transforms under the forces of gravity into the desired arch shape. After discussing general aspects of innovation, the basic concept of the arch bridge system is presented along with technological advances since it was patented. Experiences gained from building over 40 FlexiArch bridges in the UK and Ireland and from model and full-scale tests carried out to validate the system during installation and in service are described. Thus under load the system behaves like a traditional masonry arch and existing analysis methods can be used for design and assessment.

Peer Rating for Feedback in Group Projects

The National Student Survey (NSS) in the UK has since 2005 questioned final year
undergraduate students on a broad range of issues relating to their university experience.
Across disciplines and universities students have expressed least satisfaction in the areas of
assessment and feedback. In response to these results many educational practitioners have
reviewed and revised their procedures and the UK Higher Education Academy (HEA) has
produced guidelines of best practice to assist academics in improving these specific areas.
The Product Design and Development (PDD) degree at Queen’s University Belfast is
structured with an integrated curriculum with group Design Build Test (DBT) projects as the
core of each year of the undergraduate programme. Based on the CDIO syllabus and
standards the overall learning outcomes for the programme are defined and developed in a
staged manner, guided by Bloom’s taxonomy of learning domains.
Feedback in group DBT projects, especially in relation to the development of personal and
professional skills, represents a different challenge to that of individual assignment feedback.
A review of best practice was carried out to establish techniques which could be applied to
the particular context of the PDD degree without modification and also to identify areas
where a different approach would need to be applied.
A revised procedure was then developed which utilised the structure of the PDD degree to
provide a mechanism for enhanced feedback in group project work, while at the same time
increasing student development of self and peer evaluation skills. Key to this improvement
was the separation of peer ratings from assessment in the perception of the students and the
introduction of more frequent face to face feedback interviews.
This paper details the new procedures developed and additional issues which have been
raised and addressed, with reference to the published literature, during 3 years of operation.

Risks and the financing of PPP: Perspectives from the financiers

Public private partnerships (PPP) are an established model for most governments internationally to provide infrastructure-based services, using private finance. Typically the public authority will sign a contract with a special purpose vehicle (SPV), which, because of the holistic nature of PPP, in turn sub-contracts the finance, design, construction, maintenance and soft services to companies that are often related to its shareholders. Thus there is a considerable network of linked organisations that together procure and provide the PPP project. While there is an increasing body of research that examines these PPP projects, much of it is interview or case study based so that the evidence is drawn from a small number of interviews or cases in specific sectors. It also focuses on the public sector procurer and the private sector contractor in the network of organisations. Although it has been recognised that the perceptions of the financiers may vary from those of other key PPP players there is much less research that focuses on the financiers. In this paper we report the results of a postal questionnaire survey, administered to 109 providers of senior debt and equity, from which the response rate was just less than 40%. We supplement these findings with a small number of illustrative quotes from interviewees, where the cited quote represents a commonly held view. We used SPSS and Nvivo to analyse the data. The findings show that when assessing PPPs financiers perceive a very wide range of risks as important, and that it is important to them that many of these risks are either insured or allocated to sub-contractors. When considering participating in PPPs, financiers agree that working with familiar partners on familiar projects and in familiar sectors is important, which may raise barriers to entry and undermine competitive processes.

Determining the parametric effectiveness of a CAD model

The motivation for this paper is to present an approach for rating the quality of the parameters in a computer-aided design model for use as optimization variables. Parametric Effectiveness is computed as the ratio of change in performance achieved by perturbing the parameters in the optimum way, to the change in performance that would be achieved by allowing the boundary of the model to move without the constraint on shape change enforced by the CAD parameterization. The approach is applied in this paper to optimization based on adjoint shape sensitivity analyses. The derivation of parametric effectiveness is presented for optimization both with and without the constraint of constant volume. In both cases, the movement of the boundary is normalized with respect to a small root mean squared movement of the boundary. The approach can be used to select an initial search direction in parameter space, or to select sets of model parameters which have the greatest ability to improve model performance. The approach is applied to a number of example 2D and 3D FEA and CFD problems.

Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) as aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase II, which is reported here, investigated concrete paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective, as was the case with concrete building blocks, was to replicate the process used by industry in fabricating concrete paving blocks in the laboratory. The compaction technique used involved vibration and pressure at the same time, i.e. a vibro-compaction technique. An electric hammer used previously for building blocks was not sufficient for adequate compaction of paving blocks. Adequate compaction could only be achieved by using the electric hammer while the specimens were on a vibrating table. The experimental work involved two main series of tests, i.e. paving blocks made with concrete- and masonry-derived aggregate. Variables that were investigated were level of replacement of (a) coarse aggregate only, (b) fine aggregate only, and (c) both coarse and fine aggregate. Investigation of mechanical properties, i.e. compressive and tensile splitting strength, of paving blocks made with recycled demolition aggregate determined levels of replacement which produced similar mechanical properties to paving blocks made with newly quarried aggregates. This had to be achieved without an increase in the cement content. The results from this research programme indicate that recycled demolition aggregate can be used for this new higher value market and therefore may encourage demolition contractors to develop crushing and screening facilities for this. (C) 2011 Published by Elsevier Ltd.

Critical factors affecting management of site operatives and personal in confined construction site

The aim of this paper is to identify and classify the numerous managerial issues encountered in the management of personnel in confined site construction. For the purpose of this research, a confined construction site is defined as a site where permanent works fit the site footprint, extending to levels above and/or below ground level, leaving spatial restrictions for other operations (e.g. plant and material movements, materials storage and temporary accommodation etc.) and require effective resource co-ordination beyond normal on-site management input. A literature review and analysis, case studies incorporating interviews and focus groups along with a questionnaire survey were used in order to gain a comprehensive insight into the issues in the management of personnel in a confined construction site environment. The following are the top five leading issues highlighted in the management of personnel in confined site construction; (1) Accidents due to an untidy site, (2) One contractor holding up another because of the lack of space, (3) A risk to personnel because of vehicular traffic on-site, (4) Difficult to facilitate several contractors at one work location, and (5) Numerous personnel working within the one space. In today’s modern environment, spatial restrictions are quickly becoming the norm in the industry. Therefore, the management of personnel on-site becomes progressively more difficult with the decrease in available space on-site. Where such environments exist, acknowledging the numerous issues highlighted above, aids site management in the supervision and co-ordination of personnel on-site, thus reducing accidents, increasing productivity and increase profit margins, in spatially restricted environments. As on-site management professionals successfully identify, acknowledge and counteract the numerous issues illustrated, the successful management of personnel on a confined construction site is achievable. By identifying the numerous issues, on-site management can proactively mitigate such issues through adopting counteractive measures and through successful identification of the traits identified.

An exploration of small business Website optimization: Enablers, influencers and an assessment approach

The literature reveals a need for more integrated research contributions to small business Internet adoption and theoretical development. There is also a need for these developments to relate more closely to effective, or optimized, use of web applications in business processes and growth. To address this, and building upon recent integrated theoretical developments, the aim of this study is to explore the determinants and outcomes relating to small business Website optimization. Five determining variables isolated from recent theoretical developments relate to small business Website adoption outcomes. Utilizing an optimization rating instrument with these variables a methodological approach produced four key findings. From these findings we develop an optimization model and focus important contributions as propositions. These propositions provide a new understanding of the enablers and influencers of small business Website optimization and a basis for research to develop further insights in this area.

Effectiveness of using clinical guidelines for conducting palliative care family meetings in Japan

PURPOSE: The purpose of this study is to pilot test the effectiveness of using recently developed clinical guidelines from Australia for conducting palliative care family meetings in Japan. METHODS: Palliative care family meetings were conducted using clinical guidelines with 15 primary family carers of cancer patients who were admitted to an acute care hospital in Japan. Using the pre-family meeting questionnaire, the primary carers were asked to write key concerns to discuss during the family meetings and rate their concerns via a numerical rating scale: how upset/worried they were about the problem, frequency in which problem occurs, life interference with the problem, and the confidence to deal with the problem. Within 3 days after the meeting, the primary carers were asked to complete the post-meeting questionnaire to evaluate the effectiveness of the family meeting. RESULTS: There was a significant improvement in family carers' psychological well-being in the post-meeting questionnaires compared to the pre-meeting questionnaires as follows: how upset/worried they were about the problem, t(14)?=?3.1071, p?

The systematic development of an innovative DVD to raise awareness of preconception care

The purpose of this article is to describe the design, development and process evaluation of a preconception counselling resource (a DVD) for women with pre-gestational diabetes. DVD design and development centred on two key stakeholders ('DVD user group' and 'professional advisory group') working alongside a professional multimedia company. The DVD user group provided feedback on preferred DVD style, and informed modifications and improvements. The professional advisory group prepared the script, and ensured content and face validity. Evaluation of the DVD's acceptability and usefulness was assessed among women with diabetes via a postal questionnaire. Development phase: the resulting DVD is a 45-minute programme with three parts, featuring eight women with diabetes sharing their views and experiences, alongside an evidence-based commentary. The programme focuses on the importance of preventing an unplanned pregnancy (highlighting contraception) and on essential planning advice. Evaluation phase: 97 women (89 with type 1 and 8 with type 2 diabetes) evaluated the DVD using a rating scale of 0-10. Mean (SD) scores were: 9.1 (1.3) for quality; 9.0 (1.4) for content; 8.8 (1.5) for interest; 8.7 (1.8) for usefulness; 7.8 (2.2) for knowledge acquisition; and 8.0 (2.1) for knowledge confirmation. This combined user and multi-professional advisory group approach has produced an innovative and highly acceptable preconception counselling resource for women with diabetes. The development process and outcome evaluation are an important point of reference for future educational programmes. Future research will evaluate the impact of this preconception counselling resource on pregnancy planning indicators and pregnancy outcome.

Efficacy of a powered wheelchair simulator for school aged children: A randomised controlled trial.

Purpose: To determine the efficacy of a custom made wheelchair simulation in training children to use a powered wheelchair (PWC). Design: Randomised controlled trial employing the 4C/ID-model of learning. Twenty-eight typically developing children (13M, 15F; mean age 6 years, SD 6 months) were assessed on their operation of a PWC using a functional evaluation rating scale. Participants were randomly assigned to intervention (8x 30minute training sessions using a joystick operated wheelchair simulation) or control conditions (no task), and were re-assessed on their PWC use following the intervention phase. Additional data from the simulation on completion times, errors and total scores were recorded for the intervention group. Results: Analysis of variance showed a main effect of time, with planned comparisons revealing a statistically significant change in PWC use for the intervention (p = 0.022) but not the control condition. Whilst the intervention group showed greater improvement than the controls this did not reach statistical significance. Multiple regression analyses showed that gender was predictive of pre-test (p = 0.005) functional ability. Implications: A simulated wheelchair task appears to be effective in helping children learn to operate a PWC. Greater attention should be given to female learners who underperformed when compared to their male counterparts. This low cost intervention could be easily employed at home to reduce PWC training times in children with motor disorders.

The quality of reporting of diagnostic accuracy studies in glaucoma using scanning laser polarimetry

PURPOSE: Scanning laser polarimetry (SLP) has been proposed as a useful diagnostic test for glaucoma. This study was conducted to evaluate the quality of reporting of published studies using the SLP for diagnosing glaucoma. METHODS: A validated Medline and hand search of English-language articles reporting on measures of diagnostic accuracy of the SLP for glaucoma was performed. Two reviewers independently selected and appraised the manuscripts. The Standards for Reporting of Diagnostic Accuracy (STARD) checklist was used to evaluate the quality of each publication. RESULTS: A total of 47 papers were identified of which the first 10 (from 1997 to 2000) and the last 10 articles (from 2004 to 2005) were appraised. Interobserver rating agreement of STARD items was high (85.5% agreement, ?=0.796). The number of STARD items properly reported ranged from 3/25 to 19/25. Only a quarter of studies (5/20) explicitly reported more than half of the STARD items. Important aspects of the methodology were often missing such as participant sampling (reported in 40% of manuscripts), masking of the readers of the index test and reference standard (reported in 20% of manuscripts), and estimation of uncertainty (eg, 95% confidence intervals, reported in 25% of manuscripts). There was a slight increase in the number of STARD items reported with time. CONCLUSIONS: The quality of reporting of diagnostic accuracy tests for glaucoma with SLP is suboptimal. The STARD initiative may be a useful tool for appraising the strengths and weaknesses of diagnostic accuracy studies. © 2007 Lippincott Williams & Wilkins, Inc.