The effect of construction pattern and unit interlock on the structural behaviour of block pavements

The maintenance or even replacement of cracked pavements requires considerable financial resources and puts a large burden on the budgets of local councils. In addition to these costs, local councils also face liability claims arising from uneven or cracked pedestrian pavements. These currently cost the Manchester City Council and Preston City Council around £6 million a year each. Design procedures are empirical. A better understanding of the interaction between paving blocks, bedding sand and subbase was necessary in order to determine the mode of failure of pavements under load. Increasing applied stress was found to mobilise ‘‘rotational interlock’’, providing increased pavement stiffness and thus increased load dissipation resulting in lower transmitted stress on the subgrade. The indications from the literature
review were that pavements are designed to fail by excessive deformation and that paving blocks remained uncracked at failure. This was confirmed with experimental data which was obtained from tests on segments of pavements that were laid/constructed in a purpose built test frame in the laboratory.

Development of a value-added soil conditioner from high shear co-granulation of organic waste and limestone powder

This paper reports on a technical feasibility study of the production of organo-mineral fertiliser from the co-granulation of limestone powders with tea waste. The results from this preliminary study show that the co-granulation of tea waste provided an alternative method of waste recovery, as it converts the waste into a value-added product. Fertiliser granules were successfully produced from various compositions of limestone and tea waste. The effect of tea waste concentration on granule strength was analysed; the granule strength
was in the range 0.2 to 1.8 MPa depending on powder composition; increasing the tea waste mass fraction resulted in a reduction in granule strength.Varying the teawaste to limestone ratio also influenced the compressibility of the granules; the granules compressibility increased with increasing tea waste mass fraction. It was further found that increasing the mass fraction of tea waste in the binary mixture of powder reduced the granule median size of the batch.

Automotive waste heat recovery: Working fluid selection and related boundary conditions

This paper presents the rational for the selection of fluids for use in a model based study of sub and supercritical Waste Heat Recovery (WHR) Organic Rankine Cycle (ORC). The study focuses on multiple vehicle heat sources and the potential of WHR ORC’s for its conversion into useful work. The work presented on fluid selection is generally applicable to any waste heat recovery system, either stationary or mobile and, with careful consideration, is also applicable to single heat sources. The fluid selection process presented reduces the number of potential fluids from over one hundred to a group of under twenty fluids for further refinement in a model based WHR ORC performance study. The selection process uses engineering judgement, legislation and, where applicable, health and safety as fluid selection or de-selection criteria. This paper also investigates and discusses the properties of specific ORC fluids with regard to their impact on the theoretical potential for delivering efficient WHR ORC work output. The paper concludes by looking at potential temperature and pressure WHR ORC limits with regard to fluid properties thereby assisting with the generation of WHR ORC simulation boundary conditions.

Waste Not, Want Not: Managing Perishables in Small and Medium Retail Enterprises

Purpose of this paper:
Recent literature indicates that around one third of perishable products finish as waste (Mena et al., 2014): 60% of this waste can be classified as avoidable (EC, 2010) suggesting logistics and operational inefficiencies along the supply chain. In developed countries perishable products are predominantly wasted in wholesale and retail (Gustavsson et al., 2011) due to customer demand uncertainty the errors and delays in the supply chain (Fernie and Sparks, 2014). While research on logistics of large retail supply chains is well documented, research on retail small and medium enterprises’ (SMEs) capabilities to prevent and manage waste of perishable products is in its infancy (c.f. Ellegaard, 2008) and needs further exploration. In our study, we investigate the retail logistics practice of small food retailers, the factors that contribute to perishable products waste and the barriers and opportunities of SMEs in retail logistics to preserve product quality and participate in reverse logistics flows.

Design/methodology/approach:
As research on waste of perishable products for SMEs is scattered, we focus on identifying key variables that contribute to the creation of avoidable waste. Secondly we identify patterns of waste creation at the retail level and its possibilities for value added recovery. We use explorative case studies (Eisenhardt, 1989) and compare four SMEs and one large retailer that operate in a developed market. To get insights into specificities of SMEs that affect retail logistics practice, we select two types of food retailers: specialised (e.g. greengrocers and bakers) and general (e.g. convenience store that sells perishable products as a part of the assortment)

Findings:
Our preliminary findings indicate that there is a difference between large retailers and SME retailers in factors that contribute to the waste creation, as well as opportunities for value added recovery of products. While more factors appear to affect waste creation and management at large retailers, a small number of specific factors appears to affect SMEs. Similarly, large retailers utilise a range of practices to reduce risks of product perishability and short shelf life, manage demand, and manage reverse logistics practices. Retail SMEs on the other hand have limited options to address waste creation and value added recovery. However, our findings show that specialist SMEs could successfully minimize waste and even create possibilities for value added recovery of perishable products. Data indicates that business orientation of the SME, the buyersupplier relationship, and an extent of adoption of lean principles in retail coupled with SME resources, product specific regulations and support from local authorities for waste management or partnerships with other organizations determine extent of successful preservation of a product quality and value added recovery.

Value:
Our contribution to the SCM academic literature is threefold: first, we identify major factors that contribute to the generation waste of perishable products in retail environment; second, we identify possibilities for value added recovery for perishable products and third, we present opportunities and challenges for SME retailers to manage or participate in activities of value added recovery. Our findings contribute to theory by filling a gap in the literature that considers product quality preservation and value added recovery in the context of retail logistics and SMEs.

Research limitations/implications:
Our findings are limited to insights from five case studies of retail companies that operate within a developed market. To improve on generalisability, we intend to increase the number of cases and include data obtained from the suppliers and organizations involved in reverse logistics flows (e.g. local authorities, charities, etc.).

Practical implications:
With this paper, we contribute to the improvement of retail logistics and operations in SMEs which constitute over 99% of business activities in UK (Rhodes, 2015). Our findings will help retail managers and owners to better understand the possibilities for value added recovery, investigate a range of logistics and retail strategies suitable for the specificities of SME environment and, ultimately, improve their profitability and sustainability.

Examining architects' performance in Nigeria private and public sectors building projects

Abstract: Purpose – The aim of this paper is to examine and compare the performance of architects with respect to clients' rating of importance over a set of performance criteria in Nigerian public and private sector building projects. Design/methodology/approach – A survey involving clients from both public and private sectors of recently completed building projects in Nigeria was undertaken. Data analysis includes comparing similarities and differences using standardised ratio, Mann Whitney U and Wilcoxon tests. Findings – The results show that private sector clients are likely to be more concerned with cost, while public sector clients are more concerned with buildability of design. A total of 79 per cent of the criteria were similarly selected by both sectors with respect to importance of the criteria. Architects need to improve their performance significantly in about 82 per cent of the whole set of 28 criteria. The architects performed better in the public sector than the private sector and 14 per cent of the criteria were indicated as being statistically different in terms of architects' performance. Originality/value – The results provide feedback which can be incorporated in architects' future projects so as to ensure successful project implementation in the building delivery process.

Description and search labor for information retrieval

Selection power is taken as the fundamental value for information retrieval systems. Selection power is regarded as produced by selection labor, which itself separates historically into description and search labor. As forms of mental labor, description and search labor participate in the conditions for labor and for mental labor. Concepts and distinctions applicable to physical and mental labor are indicated, introducing the necessity of labor for survival, the idea of technology as a human construction, and the possibility of the transfer of human labor to technology. Distinctions specific to mental labor, particular between semantic and syntactic labor, are introduced. Description labor is exemplified by cataloging, classification, and database description, can be more formally understood as the labor involved in the transformation of objects for description into searchable descriptions, and is also understood to include interpretation. The costs of description labor are discussed. Search labor is conceived as the labor expended in searching systems. For both description and search labor, there has been a progressive reduction in direct human labor, with its syntactic aspects transferred to technology, effectively compelled by the high relative costs of direct human labor compared to machine processes.