Spectrally efficient cooperative diversity protocol for uplink wireless transmission

A spectrally efficient cooperative protocol for uplink wireless transmission in a centralised communication system is proposed, where each of the N users play the relaying and source roles simultaneously by using superposition (SP) modulation. The probability density function of the mutual information between SP-modulated transmitted and received signals of the cooperative uplink channels is derived. Using the high-signal-to-noise ratio (SNR) approximation of this density function, the outage probability formula of the system as well as its easily computable tight upper and lower bounds are obtained and these formulas are evaluated numerically. Numerical results show that the proposed strategy can achieve around 3 dB performance gain over comparable schemes. Furthermore, the multiplexing and diversity tradeoff formula is derived to illustrate the optimal performance of the proposed protocol, which also confirms that the SP relaying transmission does not cause any loss of data rate. Moreover, performance characterisation in terms of ergodic and outage capacities are studied and numerical results show that the proposed scheme can achieve significantly larger outage capacity than direct transmission, which is similar to other cooperative schemes. The superiority of the proposed strategy is demonstrated by the fact that it can maintain almost the same ergodic capacity as the direct transmission, whereas the ergodic capacity of other cooperative schemes would be much worse.

Novel loading tests on full-scale tapered member portal frames

This paper presents the experimental results of loading tests on two 18m span tapered member portal frames designed to BS 5950. Deflection test results for vertical, lateral and combined loading cases are compared with the predictions given by elastic analysis to BS 5950 and shown to be favourable. The predicted ultimate capacities and modes of failure, which were by lateral-torsional buckling of the columns, were also found to agree with the experimental behaviour. It was found that the method of modelling the tapered members as a series of prismatic elements gave good comparison with test results.

Reducing the mapping between perception and action facilitates imitation

This study investigated two hypotheses regarding the mapping of perception to action during imitation. The first hypothesis predicted that as children’s cognitive capacities increase the tendency to map one goal and disregard others during imitation should decrease. This hypothesis was tested by comparing the performances of 168 4- to 7-year-olds in a gestural imitation task developed by Bekkering, Wohlschläger, and Gattis. The second hypothesis predicted that reducing the mapping between perception and action should reduce the demands on the cognitive resources of the child. This hypothesis was tested by creating a condition in which perception and action overlapped by sharing objects between experimenter and child. In three experimental conditions, an adult modelled four gestures, directed at either: 1) one of two sets of round stickers (proprietary objects); 2) the same location on the table, without any sticker (no objects); or 3) one set of round stickers, which were shared with the child (shared objects). The results confirmed both hypotheses. Four- and five-year-olds imitated less accurately when imitation involved mapping of both objects and movements (proprietary and shared objects) than when imitation involved mapping movements only (no objects). Seven-year-olds imitated accurately in all three conditions, demonstrating that increased cognitive capacity allowed them to map multiple goals from perception to action. Most importantly, reducing the mapping between perception and action in the shared objects condition facilitated imitation, specifically for the transitional group, 6-year-olds. We conclude that mapping between perception and action is not direct, but resembles mapping relations in analogical reasoning: cognitive processes mediate mapping from perception to action.

Adsorption mechanisms of removing heavy metals and dyes from aqueous solution using date pits solid adsorbent

A potential usefulness of raw date pits as an inexpensive solid adsorbent for methylene blue (MB), copper ion (Cu2+), and cadmium ion (Cd2+) has been demonstrated in this work. This work was conducted to provide fundamental information from the study of equilibrium adsorption isotherms and to investigate the adsorption mechanisms in the adsorption of MB, Cu2+, and Cd2+ onto raw date pits. The fit of two models, namely Langmuir and Freundlich models, to experimental data obtained from the adsorption isotherms was checked. The adsorption capacities of the raw date pits towards MB and both Cu2+ and Cd2+ ions obtained from Langmuir and Freundlich models were found to be 277.8, 35.9, and 39.5 mg g(-1), respectively. Surface functional groups on the raw date pits surface substantially influence the adsorption characteristics of MB, Cu2+, and Cd2+ onto the raw date pits. The Fourier transform infrared spectroscopy (FTIR) studies show clear differences in both absorbances and shapes of the bands and in their locations before and after solute adsorption. Two mechanisms were observed for MB adsorption, hydrogen bonding and electrostatic attraction, while other mechanisms were observed for Cu2+ and Cd2+. For Cu2+, binding two cellulose/lignin units together is the predominant mechanism. For Cd2+. the predominant mechanism is by binding itself using two hydroxyl groups in the cellulose/lignin unit. (C) 2009 Elsevier B.V. All rights reserved.

Predatory fish loss affects the structure and functioning of a model marine food web

The rate of species loss is increasing on a global scale and predators are most at risk from human-induced extinction. The effects of losing predators are difficult to predict, even with experimental single species removals, because different combinations of species interact in unpredictable ways. We tested the effects of the loss of groups of common predators on herbivore and algal assemblages in a model benthic marine system. The predator groups were fish, shrimp and crabs. Each group was represented by at least two characteristic species based on data collected at local field sites. We examined the effects of the loss of predators while controlling for the loss of predator biomass. The identity, not the number of predator groups, affected herbivore abundance and assemblage structure. Removing fish led to a large increase in the abundance of dominant herbivores, such as Ampithoids and Caprellids. Predator identity also affected algal assemblage structure. It did not, however, affect total algal mass. Removing fish led to an increase in the final biomass of the least common taxa (red algae) and reduced the mass of the dominant taxa (brown algae). This compensatory shift in the algal assemblage appeared to facilitate the maintenance of a constant total algal biomass. In the absence of fish, shrimp at higher than ambient densities had a similar effect on herbivore abundance, showing that other groups could partially compensate for the loss of dominant predators. Crabs had no effect on herbivore or algal populations, possibly because they were not at carrying capacity in our experimental system. These findings show that contrary to the assumptions of many food web models, predators cannot be classified into a single functional group and their role in food webs depends on their identity and density in 'real' systems and carrying capacities.

Masks as self-study. Challenging and sustaining teachers’ personal and professional personae in early–mid career life phases

Drawing on previous research identifying how teachers’ capacities to sustain their effectiveness in different phases of their professional lives are affected positively and/or negatively by their sense of identity, this paper illuminates three early–mid career teachers’ self-study inquiries, centring on mask work. The creative development of individual masks discloses teachers’ complex, occasionally
dislocated narratives of personal/professional identity. Subsequent improvisation with their masks is shown to engage teachers emotionally with tensions and dissonances within and between their various personae and personal, professional and political contexts at each of their respective career life phases. Storylines ultimately become reframed and, in a number of instances, lay claim to reinvigorated commitment, self-determination and initiatives for change.

Action research and reflective practice: towards a holistic view

Two concepts that have captured the imagination of the educational community in the last 60 years have been those of ‘reflective practice’ and ‘action research’. Both, in their various forms, are considered to be critical dimensions of the professional development of teachers. However, whilst both were receiving academic attention during the 1930s and 1940s (Lewin, 1934, cited in Adelman, 1993; Lewin, 1946; Dewey, 1933), it was not until Stenhouse’s (1975) notion of the teacher-as-researcher that the two came most compellingly into relationship and educational action research as a process, which held at its centre different kinds of reflection, began to be reformulated in Britain (Carr, 1993). This article considers the important part played in teachers’ development by different kinds of action research. Its central thesis is that, although action research has a critical role to play not least as a means of building the capacity of teachers as researchers of their own practice, there has been insufficient attention given to both the nature of reflection in the action research process, and its relationship to the purposes, processes and outcomes. The article challenges the rational, cognitive models of reflection that are implicit in much of the action research literature. It suggests that more attention needs to be given to the importance of the role of emotion in understanding and developing the capacities for reflection which facilitates personal, professional and ultimately system change.

Investigation of Ultimate Strength of Deck Slabs in Steel-Concrete Bridges

In the last 50 years, many bridges have been built as composite structures with decks of reinforced concrete that are supported by longitudinal steel beams. The presence of the longitudinal steel beams and the unloaded area of concrete slab cause the loaded deck slabs to be restrained against lateral expansion. As a result, a compressive membrane thrust is developed. In experimental tests, the authors built a series of one-third scale steel-concrete composite bridge models with several varying structural parameters, including concrete compressive strength, reinforcement percentage, and the size of steel supporting beams. After comparing the results of different models, the influence of these structural parameters on the amount of compressive membrane action in the deck slab was evaluated. Furthermore, the improvement of an existing theoretical model provided accurate predictions for the loading-carrying capacities.

Sustainable Rural Tourism: Lessons for Rural Development

Rural areas are recognised for their complex, multi-functional capacities with a range of different interest groups claiming their rights to, and use of, different rural spaces. The current rural development paradigm that is evident across the globe is epitomised by the European LEADER approach. Using evidence from the proposed National Park in Northern Ireland, we ask the question: what is the potential of sustainable rural tourism to contribute to rural development? Within our analysis we consider the scope for adaptive tourism to overcome some of the ongoing challenges that have been identified within the LEADER approach. Four themes are revealed from this analysis: institutional (in)capacity; legitimacy of local groups; navigating between stakeholder interests; and sustainable tourism in practice. These issues, discussed in turn, have clear implications for the new rural development programme.

Separation of acid-dyes mixture by bamboo derived active carbon

In the present study, the activated carbon is produced using phosphoric acid treatment of the waste bamboo scaffolding and activated at either 400 or 600 °C. The effect of acid to bamboo ratio (Xp) up to 2.4 has been studied. The BET surface area increased with increasing Xp and activating temperature. BET surface area up to 2500 m2/g carbon has been produced. In order to simulate effluent treatment from textile industry, the produced carbon was tested for its dye adsorption capacities. Two acid dyes with different molecular sizes were used, namely Acid Yellow 117 (AY117) and Acid Blue 25 (AB25). In a single component system, it was found that dye with smaller molecular size, AB25, was readily adsorbed onto the carbon while the larger size dye, AY117, showed little adsorption. As a result, it is possible to tailor-make the carbon for the adsorption of dye mixtures in industrial applications, especially textile dyeing, i.e. molecular sieve effect. A binary AY117–AB25 mixture was used to test the possibility of the molecular sieve effect. Furthermore, experimental results were fitted to equilibrium isotherm models, Langmuir, Freundlich and Sips for the single component system. For the binary component system, extended single-component equilibrium isotherm models were used to predict the experimental data.

Adsorption of sulfur dioxide on chemically modified natural clinoptilolite. Acid modification

Natural Bulgarian clinoptilolite from the south-eastern Rhodopes mountain was modified through treatment with hydrochloric acid with various normality, both single and repeatedly, as well as through a charring of a preliminary obtained NH4-form. The parameters concerning the uptake of the ion-exchangeable cations (Ca2+, Na+ and K+), as well as the uptake of aluminium from the natural material were calculated on the basis of the chemical contents. The highest extent of cations removal was attained in the case of the treatment with NH4Cl solution, while the highest aluminium deficiency was established in the samples treated by hydrochloric acid solutions with increasing concentration. Sulfur dioxide adsorption on the obtained decationised and dealuminised samples was studied according to the frontal-dynamic method. The parameters of the breakthrough curves, namely breakthrough time, saturation time and some of the statistical moments of the curve distribution, were determined. The dynamic adsorption capacities were also specified. Comparing the momentum values it was established that as a result of the natural zeolite treatment with NH4Cl and with low concentrated acid, the diffusion resistance decreases because of the dominant exchange of the presenting exchangeable cations in the samples with the smaller size protons and because of enlargement of the pores opening. Intensified dealuminisation was observed when more concentrated acid solutions are used. The capacity is enhanced, probably due to an increase in the total pore volume.

Sensing Spaces:A Body-oriented Architectural Design Education

The contemporary dominance of visuality has turned our understanding of space into a mode of unidirectional experience that externalizes other sensual capacities of the body while perceiving the built environment. This affects not only architectural practice but also architectural education when an introduction to the concept of space is often challenging, especially for the students who have limited spatial and sensual training. Considering that an architectural work is not perceived as a series of retinal pictures but as a repeated multi-sensory experience, the problem definitions in the design studio need to be disengaged from the dominance of a ‘focused vision’ and be re-constructed in a holistic manner. A method to address this approach is to enable the students to refer to their own sensual experiences of the built environment as a part of their design processes. This paper focuses on a particular approach to the second year architectural design teaching which has been followed in the Department of Architecture at Izmir University of Economics for the last three years. The very first architectural project of the studio and the program, entitled ‘Sensing Spaces’, is conducted as a multi-staged design process including ‘sense games, analyses of organs and their interpretations into space’. The objectives of this four-week project are to explore the sense of space through the design of a three-dimensional assembly, to create an awareness of the significance of the senses in the design process and to experiment with re-interpreted forms of bodily parts. Hence, the students are encouraged to explore architectural space through their ‘tactile, olfactory, auditory, gustative and visual stimuli’. In this paper, based on a series of examples, architectural space is examined beyond its boundaries of structure, form and function, and spatial design is considered as an activity of re-constructing the built environment through the awareness of bodily senses.

Threshold effects in the Teaching Space Allocation Problem with Splitting

Universities aim for good “Space Management” so as to use the teaching space efficiently. Part of this task is to assign rooms and time-slots to teaching activities with limited numbers and capacities of lecture theaters, seminar rooms, etc. It is also common that some teaching activities require splitting into multiple events. For example, lectures can be too large to fit in one room or good teaching practice requires that seminars/tutorials are taught in small groups. Then, space management involves decisions on splitting as well as the assignments to rooms and time-slots. These decisions must be made whilst satisfying the pedagogic requirements of the institution and constraints on space resources. The efficiency of such management can be measured by the “utilisation”: the percentage of available seat-hours actually used. In many institutions, the observed utilisation is unacceptably low, and this provides our underlying motivation: to study the factors that affect teaching space utilisation, with the goal of improving it. We give a brief introduction to our work in this area, and then introduce a specific model for splitting. We present experimental results that show threshold phenomena and associated easy-hard-easy patterns of computational difficulty. We discuss why such behaviour is of importance for space management.

Biosorption of toxic chromium from aqueous phase by lignin: mechanism, effect of other metal ions and salts

Surface reaction methodology was implicated in the optimization of hexavalent chromium removal onto lignin with respect to the process parameters. The influence of altering the conditions for removal of chromium(VI), for instance; solution pH, ionic strength, initial concentration, the dose of biosorbent, presence of other metals (Zn and Cu), presence of salts and biosorption-desorption studies, were investigated. It was found that the biosorption capacity of lignin depends on solution pH, with a maximum biosorption capacity for chromium at pH 2. Experimental equilibrium data were fitted to five different isotherm models by non-linear regression method, however, the biosorption equilibrium data were well interpreted by the Freundlich isotherm. The maximum biosorption capacities (q(max)) obtained using Dubinin-Radushkevich and Khan isotherms for Cr(VI) biosorption are 31.6 and 29.1 mg/g. respectively. Biosorption showed pseudo second order rate kinetics at different initial concentrations of Cr(VI). The intraparticle diffusion study indicated that film diffusion may be involved in the current study. The percentage removal of chromium on lignin decreased significantly in the presence of NaHCO3 and K2P2O7 salts. Desorption data revealed that nearly 70% of the Cr(VI) adsorbed on lignin could be desorbed using 0.1 M NaOH. It was evident that the biosorption mechanism involves the attraction of both hexavalent chromium (anionic) and trivalent chromium (cationic) onto the surface of lignin. (C) 2011 Elsevier B.V. All rights reserved.

Ecological coherence in marine reserve network design: an empirical evaluation of sequential site selection using genetic structure

Ecological coherence is a multifaceted conservation objective that includes some potentially conflicting concepts. These concepts include the extent to which the network maximises diversity (including genetic diversity) and the extent to which protected areas interact with non-reserve locations. To examine the consequences of different selection criteria, the preferred location to complement protected sites was examined using samples taken from four locations around each of two marine protected areas: Strangford Lough and Lough Hyne, Ireland. Three different measures of genetic distance were used: FST, Dest and a measure of allelic dissimilarity, along with a direct assessment of the total number of alleles in different candidate networks. Standardized site scores were used for comparisons across methods and selection criteria. The average score for Castlehaven, a site relatively close to Lough Hyne, was highest, implying that this site would capture the most genetic diversity while ensuring highest degree of interaction between protected and unprotected sites. Patterns around Strangford Lough were more ambiguous, potentially reflecting the weaker genetic structure around this protected area in comparison to Lough Hyne. Similar patterns were found across species with different dispersal capacities, indicating that methods based on genetic distance could be used to help maximise ecological coherence in reserve networks. ⺠Ecological coherence is a key component of marine protected area network design. ⺠Coherence contains a number of competing concepts. ⺠Genetic information from field populations can help guide assessments of coherence. ⺠Average choice across different concepts of coherence was consistent among species. ⺠Measures can be combined to compare the coherence of different network designs.