Monitoring of saliva pH using miniaturized sensing tools as an indicator of oral health

The monitoring of oral disease is important, not alone for oral health, but for the detection and prevention of
systemic disease. The link between oral health and systemic disease is the focus of many studies, with
indications emerging of a causal link [1]. For disease diagnostics, blood has typically been the fluid of choice
for analysis, the retrieval of which is invasive and therefore unsuitable for wearable technology. Analysis of
saliva, however, is less invasive than that of blood, requires little or no pre-treatment and is abundantly
available. A strong correlation has been found between the analytes of blood and saliva [2] with saliva
containing biomarkers for diseases such as diabetes, oral cancer and cardiovascular disease. The development of
an implantable multi-parametric wireless sensor, to monitor both salivary analytes and changes in gingival
temperature, is the aim of this research project.
The aim of our current study is to detect changes in salivary pH, using a gold electrode with a pHsensitive
iridium oxide layer, and an Ion Sensitive Field Effect Transistor probe. Characterisation studies were
carried out in artificial saliva (AS). A salivary pH of between 4.5pH-7.5pH [3], and gingival temperature
between 35°C-38°C [4], were identified as the target range of interest for the human oral environment. Sensor
measurements were recorded in solutions of varying pH and temperature. An ISFET probe was then implanted
into a prototype denture and characterised in AS. This study demonstrates the suitability of ISFET and gold
electrode pH sensors for incorporation into implantable oral sensors.
[1] G. Taylor and W. Borgnakke, “Periodontal disease: associations with diabetes, glycemic control and
complications,” Oral Dis., vol. 14, no. 3, pp. 191–203, Apr. 2008.
[2] E. Tékus, M. Kaj, E. Szabó, N. L. Szénási, I. Kerepesi, M. Figler, R. Gábriel, and M. Wilhelm,
“Comparison of blood and saliva lactate level after maximum intensity exercise,” Acta Biol. Hung., vol. 63
Suppl 1, pp. 89–98, 2012.
[3] S. Naveen, M. L. Asha, G. Shubha, A. Bajoria, and A. Jose, “Salivary Flow Rate, pH and Buffering
Capacity in Pregnant and Non Pregnant Women - A Comparative Study,” JMED Res., pp. 1–8, Feb. 2014.
[4] A. F. Holthuis and F. S. Chebib, “Observations on temperature and temperature patterns of the gingiva. I.
The effect of arch, region and health,” J. Periodontol., vol. 54, no. 10, pp. 624–628, Oct. 1983

THE SAAF STUDY: evaluation of the Safeguarding Children Assessment and Analysis Framework (SAAF), compared with management as usual, for improving outcomes for children and young people who have experienced, or are at risk of, maltreatment: study protocol for a randomised controlled trial

Background: Serious case reviews and research studies have indicated weaknesses in risk assessments conducted by child protection social workers. Social workers are adept at gathering information but struggle with analysis and assessment of risk. The Department for Education wants to know if the use of a structured decision-making tool can improve child protection assessments of risk.

Methods/design: This multi-site, cluster-randomised trial will assess the effectiveness of the Safeguarding Children Assessment and Analysis Framework (SAAF). This structured decision-making tool aims to improve social workers' assessments of harm, of future risk and parents' capacity to change. The comparison is management as usual.

Inclusion criteria: Children's Services Departments (CSDs) in England willing to make relevant teams available to be randomised, and willing to meet the trial's training and data collection requirements.

Exclusion criteria: CSDs where there were concerns about performance; where a major organisational restructuring was planned or under way; or where other risk assessment tools were in use.

Six CSDs are participating in this study. Social workers in the experimental arm will receive 2 days training in SAAF together with a range of support materials, and access to limited telephone consultation post-training. The primary outcome is child maltreatment. This will be assessed using data collected nationally on two key performance indicators: the first is the number of children in a year who have been subject to a second Child Protection Plan (CPP); the second is the number of re-referrals of children because of related concerns about maltreatment. Secondary outcomes are: i) the quality of assessments judged against a schedule of quality criteria and ii) the relationship between the three assessments required by the structured decision-making tool (level of harm, risk of (re) abuse and prospects for successful intervention).

Discussion: This is the first study to examine the effectiveness of SAAF. It will contribute to a very limited literature on the contribution that structured decision-making tools can make to improving risk assessment and case planning in child protection and on what is involved in their effective implementation.

Knowledge Exchange, Spatial Analysis & Healthy Urban Environments (KESUE): Project Report

The Knowledge Exchange, Spatial Analysis and Healthy Urban Environments (KESUE) project has extended work previously undertaken by a QUB team of inter-disciplinary researchers engaged with the Physical Activity in the Regeneration of Connswater (PARC) project (Tully et al, 2013). The PARC project focussed on parts of East Belfast to assess the health impact of the Connswater Community Greenway. The KESUE project has aimed to extend some of the tools used initially in East Belfast so that they have data coverage of all of Belfast and Derry-Londonderry. The purpose of this has been to enable the development of evidence and policy tools that link features of the built environment with physical activity in these two cities. The project has used this data to help shape policy decisions in areas such as physical activity, park management, public transport and planning.

Working with a range of local partners who part-funded the project (City Councils in Belfast and Derry-Londonderry, Public Health Agency, Belfast Healthy Cities and Department of Regional Development), this project has mapped all the footpaths in the two cities (covering 37% of the NI population) and employed this to develop evidence used in strategies related to healthy urban planning. Using Geographic Information Systems (GIS), the footpath network has been used as a basis for a wide range of policy-relevant analyses including pedestrian accessibility to public facilities, site options for new infrastructure and assessing how vulnerable groups can access services such as pharmacies. Key outputs have been Accessibility Atlases and maps showing how walkability of the built environment varies across the two cities.

In addition to generating this useful data, the project included intense engagement with potential users of the research, which has led to its continued uptake in a number of policies and strategies, creating a virtuous circle of research, implementation and feedback. The project has proved so valuable to Belfast City Council that they have now taken on one of the researchers to continue the work in-house.

Studying administrative reforms through textual analysis: the case of Italian central government accounting

This paper contributes to the literature on public-sector reforms by proposing textual analysis as a useful research strategy to explore how reform archetypes and related ideas are deployed in the parliamentary debate and regulations advancing reforms. Public Administration (PA) (Wilson 1887; Weber 1922), New Public Management (NPM) (Hood 1991, 1995; Dunleavy and Hood 1994; Ferlie et al. 1996) and Public Governance (GOV) (Osborne 2010; Rhodes 1997) can be depicted as three different archetypes providing characteristic administrative ideas and concepts (i.e. interpretive schemes) and related tools and practices (i.e. structures and systems) which lead reforms. We use textual analysis to look into more than twenty years of Italian central government accounting reforms and investigate how the three administrative archetypes have evolved, intertwined and replaced each other. Textual analysis proves a useful tool to investigate reform processes and allows highlighting that in neo-Weberian countries, such as Italy, NPM and GOV, far from being revolutionary paradigms, may represent fashionable trends that did not leave significant traces in the practice and rhetoric of reforms. These results also suggest interesting implications for practitioners and policy makers.

Novel tools for conservation genomics: comparing two high-throughput approaches for SNP discovery in the transcriptome of the European hake

The growing accessibility to genomic resources using next-generation sequencing (NGS) technologies has revolutionized the application of molecular genetic tools to ecology and evolutionary studies in non-model organisms. Here we present the case study of the European hake (Merluccius merluccius), one of the most important demersal resources of European fisheries. Two sequencing platforms, the Roche 454 FLX (454) and the Illumina Genome Analyzer (GAII), were used for Single Nucleotide Polymorphisms (SNPs) discovery in the hake muscle transcriptome. De novo transcriptome assembly into unique contigs, annotation, and in silico SNP detection were carried out in parallel for 454 and GAII sequence data. High-throughput genotyping using the Illumina GoldenGate assay was performed for validating 1,536 putative SNPs. Validation results were analysed to compare the performances of 454 and GAII methods and to evaluate the role of several variables (e.g. sequencing depth, intron-exon structure, sequence quality and annotation). Despite well-known differences in sequence length and throughput, the two approaches showed similar assay conversion rates (approximately 43%) and percentages of polymorphic loci (67.5% and 63.3% for GAII and 454, respectively). Both NGS platforms therefore demonstrated to be suitable for large scale identification of SNPs in transcribed regions of non-model species, although the lack of a reference genome profoundly affects the genotyping success rate. The overall efficiency, however, can be improved using strict quality and filtering criteria for SNP selection (sequence quality, intron-exon structure, target region score).

Geostatistical Fisher discriminant analysis

A geostatistical version of the classical Fisher rule (linear discriminant analysis) is presented.This method is applicable when a large dataset of multivariate observations is available within a domain split in several known subdomains, and it assumes that the variograms (or covariance functions) are comparable between subdomains, which only differ in the mean values of the available variables. The method consists on finding the eigen-decomposition of the matrix W-1B, where W is the matrix of sills of all direct- and cross-variograms, and B is the covariance matrix of the vectors of weighted means within each subdomain, obtained by generalized least squares. The method is used to map peat blanket occurrence in Northern Ireland, with data from the Tellus
survey, which requires a minimal change to the general recipe: to use compositionally-compliant variogram tools and models, and work with log-ratio transformed data.

Communication Nonlinearities Techniques for Analysis of Passive Intermodulation

The X-parameter based nonlinear modelling tools have been adopted as the foundation for the advanced methodology
of experimental characterisation and design of passive nonlinear devices. Based upon the formalism of the Xparameters,
it provides a unified framework for co-design of antenna beamforming networks, filters, phase shifters and
other passive and active devices of RF front-end, taking into account the effect of their nonlinearities. The equivalent
circuits of the canonical elements are readily incorporated in the models, thus enabling evaluation of PIM effect on the
performance of individual devices and their assemblies. An important advantage of the presented methodology is its
compatibility with the industry-standard established commercial RF circuit simulator Agilent ADS.
The major challenge in practical implementation of the proposed approach is concerned with experimental retrieval of the X-parameters for canonical passive circuit elements. To our best knowledge commercial PIM testers and practical laboratory test instruments are inherently narrowband and do not allow for simultaneous vector measurements at the PIM and harmonic frequencies. Alternatively, existing nonlinear vector analysers (NVNA) support X-parameter measurements in a broad frequency bands with a range of stimuli, but their dynamic range is insufficient for the PIM characterisation in practical circuits. Further opportunities for adaptation of the X-parameters methodology to the PIM
characterisation of passive devices using the existing test instruments are explored.

A primer for use of genetic tools in selecting and testing the suitability of set-aside sites protected from deep-sea seafloor massive sulfide mining activities

Seafloor massive sulfide (SMS) mining will likely occur at hydrothermal systems in the near future. Alongside their mineral wealth, SMS deposits also have considerable biological value. Active SMS deposits host endemic hydrothermal vent communities, whilst inactive deposits support communities of deep water corals and other suspension feeders. Mining activities are expected to remove all large organisms and suitable habitat in the immediate area, making vent endemic organisms particularly at risk from habitat loss and localised extinction. As part of environmental management strategies designed to mitigate the effects of mining, areas of seabed need to be protected to preserve biodiversity that is lost at the mine site and to preserve communities that support connectivity among populations of vent animals in the surrounding region. These "set-aside" areas need to be biologically similar to the mine site and be suitably connected, mostly by transport of larvae, to neighbouring sites to ensure exchange of genetic material among remaining populations. Establishing suitable set-asides can be a formidable task for environmental managers, however the application of genetic approaches can aid set-aside identification, suitability assessment and monitoring. There are many genetic tools available, including analysis of mitochondrial DNA (mtDNA) sequences (e.g. COI or other suitable mtDNA genes) and appropriate nuclear DNA markers (e.g. microsatellites, single nucleotide polymorphisms), environmental DNA (eDNA) techniques and microbial metagenomics. When used in concert with traditional biological survey techniques, these tools can help to identify species, assess the genetic connectivity among populations and assess the diversity of communities. How these techniques can be applied to set-aside decision making is discussed and recommendations are made for the genetic characteristics of set-aside sites. A checklist for environmental regulators forms a guide to aid decision making on the suitability of set-aside design and assessment using genetic tools. This non-technical primer document represents the views of participants in the VentBase 2014 workshop.

Utility of sarcoma-specific fusion gene analysis in paraffin-embedded material for routine diagnosis at a specialist centre.

AIMS: Diagnosis of soft tissue sarcomas can be difficult. It can be aided by detection of specific genetic aberrations in many cases. This study assessed the utility of a molecular genetics/cytogenetics service as part of the routine diagnostic service at the Royal Marsden Hospital. METHODS: A retrospective audit was performed over a 15-month period to evaluate the diagnostic usefulness for soft tissue sarcomas with translocations of fluorescence in situ hybridisation (FISH) and reverse-transcriptase PCR (RT-PCR) in paraffin-embedded (PE) material. Results were compared with histology, and evaluated. RESULTS: Molecular investigations were performed on PE material in 158 samples (total 194 RT-PCR and 174 FISH tests), of which 85 were referral cases. Synovial sarcoma, Ewing sarcoma and low-grade fibromyxoid sarcoma were the most commonly tested tumours. Myxoid liposarcoma showed the best histological and molecular concordance, and alveolar rhabdomyosarcoma showed the best agreement between methods. FISH had a higher sensitivity for detecting tumours (73%, compared with 59% for RT-PCR) with a better success rate than RT-PCR, although the latter was specific in identifying the partner gene for each fusion. In particular, referral blocks in which methods of tissue fixation and processing were not certain resulted in higher RT-PCR failure rates. CONCLUSIONS: FISH and RT-PCR on PE tissue are practical and effective ancillary tools in the diagnosis of soft tissue sarcomas. They are useful in confirming doubtful histological diagnoses and excluding malignant diagnoses. PCR is less sensitive than FISH, and the use of both techniques is optimal for maximising the detection rate of translocation-positive sarcomas.

IMPLEMENTING BACK PAIN TREATMENT PATHWAYS IN CLINICAL PRACTICE: QUALITATATIVE ANALYSIS OF STAKEHOLDER PERCEPTIONS

Background
Evidence-based practice advocates utilising best current research evidence, while reflecting patient preference and clinical expertise in decision making. Successfully incorporating this evidence into practice is a complex process. Based on recommendations of existing guidelines and systematic evidence reviews conducted using the GRADE approach, treatment pathways for common spinal pain disorders were developed.

Aims
The aim of this study was to identify important potential facilitators to the integration of these pathways into routine clinical practice.

Methods
A 22 person stakeholder group consisting of patient representatives, clinicians, researchers and members of relevant clinical interest groups took part in a series of moderated focus groups, followed up with individual, semi-structured interviews. Data were analysed using content analysis.

Results
Participants identified a number of issues which were categorized into broad themes. Common facilitators to implementation included continual education and synthesis of research evidence which is reflective of everyday practice; as well as the use of clear, unambiguous messages in recommendations. Meeting additional training needs in new or extended areas of practice was also recognized as an important factor. Different stakeholders identified specific areas which could be associated with successful uptake. Patients frequently defined early involvement in a shared decision making process as important. Clinicians identified case based examples and information on important prognostic indicators as useful tools to aiding decisions.

Conclusion
A number of potential implementation strategies were identified. Further work will examine the impact of these and other important factors on the integration of evidence-based treatment recommendations into clinical practice.

Dynalog: an automated dynamic analysis framework for characterizing android applications

Android is becoming ubiquitous and currently has the largest share of the mobile OS market with billions of application downloads from the official app market. It has also become the platform most targeted by mobile malware that are becoming more sophisticated to evade state-of-the-art detection approaches. Many Android malware families employ obfuscation techniques in order to avoid detection and this may defeat static analysis based approaches. Dynamic analysis on the other hand may be used to overcome this limitation. Hence in this paper we propose DynaLog, a dynamic analysis based framework for characterizing Android applications. The framework provides the capability to analyse the behaviour of applications based on an extensive number of dynamic features. It provides an automated platform for mass analysis and characterization of apps that is useful for quickly identifying and isolating malicious applications. The DynaLog framework leverages existing open source tools to extract and log high level behaviours, API calls, and critical events that can be used to explore the characteristics of an application, thus providing an extensible dynamic analysis platform for detecting Android malware. DynaLog is evaluated using real malware samples and clean applications demonstrating its capabilities for effective analysis and detection of malicious applications.

Fast and sensitive aflatoxin B1 and total aflatoxins ELISAs for analysis of peanuts, maize and feed ingredients

Aflatoxins are a group of carcinogenic compounds produced by Aspergillus fungi that can grow on different agricultural crops. Both acute and chronic exposure to these mycotoxins can cause serious illness. Due to the high occurrence of aflatoxins in crops worldwide fast and cost-effective analytical methods are required for the identification of contaminated agricultural commodities before they are processed into final products and placed on the market. In order to provide new tools for aflatoxin screening two prototype fast ELISA methods: one for the detection of aflatoxin B₁ and the other for total aflatoxins were developed. Seven monoclonal antibodies with unique high sensitivity and at the same time good cross-reactivity profiles were produced. The monoclonal antibodies were characterized and two antibodies showing IC₅₀ of 0.037 ng/mL and 0.031 ng/mL for aflatoxin B₁ were applied in simple and fast direct competitive ELISA tests. The methods were validated for peanut matrix as this crop is one of the most affected by aflatoxin contamination. The detection capabilities of aflatoxin B₁ and total aflatoxins ELISAs were 0.4 μg/kg and 0.3 μg/kg for aflatoxin B₁, respectively, which are one of the lowest reported values. Total aflatoxins ELISA was also validated for the detection of aflatoxins B₂, G₁ and G₂. The application of the developed tests was demonstrated by screening 32 peanut samples collected from the UK retailers. Total aflatoxins ELISA was further applied to analyse naturally contaminated maize porridge and distiller's dried grain with solubles samples and the results were correlated with these obtained by UHPLC-MS/MS method.

An innovative electroforming process for oil heated rotational moulding tools

Rotational moulding is a method to produce hollow plastic articles. Heating is normally carried out by placing the mould into a hot air oven where the plastic material in the mould is heated. The most common cooling media are water and forced air. Due to the inefficient nature of conventional hot air ovens most of the energy supplied by the oven does not go to heat the plastic and as a consequence the procedure has very long cycle times. Direct oil heating is an effective alternative in order to achieve better energy efficiency and cycle times. This research work has combined this technology with new innovative design of mould, applying the advantages of electroforming and rapid prototyping. Complex cavity geometries are manufactured by electroforming from a rapid prototyping mandrel. The approach involves conformal heating and cooling channels , where the oil flows into a parallel channel to the electroformed cavity (nickel or copper). Because of this the mould enables high temperature uniformity with direct heating and cooling of the electroformed shell, Uniform heating and cooling is important not only for good quality parts but also for good uniform wall thickness distribution in the rotationally moulded part. The experimental work with the manufactured prototype mould has enabled analysis of the thermal uniformity in the cavity, under different temperatures. Copyright © 2008 by ASME.