Neurophobia among general practice trainees: The evidence, perceived causes and solutions

Introduction

As general practice (GP) is the main source of referrals to neurologists, neurology education for GP trainees is important. We investigated the existence of neurophobia, contributing factors and potential prevention strategies among GP trainees.

In a questionnaire survey interest, knowledge, confidence and perceived difficulty in neurology were compared with different medical specialties. Reasons for difficulty with neurology, postgraduate neurology education experience, learning methods and suggested teaching improvements were examined.

Of 205 GP trainees, 118 (58%) completed the questionnaire. Threshold analyses justified categorical intervals for the Likert responses. Trainees recorded poorer knowledge (p < 0.001), less confidence (p < 0.001) and more perceived difficulty (p < 0.001) with neurology than with any other medical specialty. GP trainees had less interest in neurology than any other medical specialty (Duncan test, p < 0.001). There was a similar gradation in difficulty and confidence perception across medical specialties. Hospital and community-based neurology teaching was graded as “poor” or “very poor” by over 60% of GP trainees. There were multiple perceived causes of neurophobia, including neuroanatomy and poor quality teaching. More organised clinical teaching and referral guidance were suggested to address GP neurophobia.

Neurophobia is common among GP trainees in Northern Ireland. GP trainees have clear and largely uniform ideas on improving their neurology education. GP training posts should reflect the importance of neurology within the GP curriculum.

Preparing assessments and examinations. Common errors and good practice.

Assessment forms an important part of the student learning experience and students place a high value on the quality of feedback that they receive from academic staff on where they might improve on their examinations or assignments. However while feedback is important the quality of the actual assessment itself before students undertake an examination or commence writing an assignment is also important. It is imperative that students are clear in their understanding of what is expected of them in order to achieve a particular grade and that there is lack of ambiguity in examinations or assignments. Biggs (2003) highlighted the importance of clarity in what students are expected to be able to do at the end of a unit of study, and that intended learning outcomes should be clearly aligned to the assessment and communicated to students so that they can structure their learning activities to optimize their assessment performance. However as Rust (2002) highlighted there are often inconsistencies in assessment practices ranging from a mis-match of assessment and learning outcomes to the inclusion of additional learning criteria and lack of clarity in the instructions. Such inconsistencies and unacceptable errors in examination papers can undermine student confidence in the assessment process
In order to try and minimise such inconsistencies an internal assessment group was set up October 2013 within the School of Nursing and Midwifery at Queens University Belfast, consisting of representative academic staff from across the range of undergraduate and post graduate courses in nursing and midwifery. The assessment group was to be a point of reference for all school examinations with a particular remit to develop an assessment strategy for all nursing and midwifery programmes and to ensure that all assessments comply with current best practice and with Nursing and Midwifery Council (NMC) requirements.
Aim
This paper aims to highlight some examples of good practice and common errors that were found in assignments and examinations that were submitted to the assessment group for review.
References

Biggs. J. (2003) Teaching for Quality Learning at University – What the Student Does 2nd Edition SRHE / Open University Press, Buckingham.
Rust, C.( 2002) The impact of assessment on student learning, Active Learning in Higher education Vol3(2):145-158

Investigating high-achieving sixth grade students' erroneous answers on the angle concept in Yozgat

The angle concept is a multifaceted concept having static and dynamic definitions. The static definition of the angle refers to “the space between two rays” or “the intersection of two rays at the same end point” (Mitchelmore & White, 1998), whereas the dynamic definition of the angle concept highlights that the size of angle is the amount of rotation in direction (Fyhn, 2006). Since both definitions represent two diverse situations and have unique limitations (Henderson & Taimina, 2005), students may hold misconceptions about the angle concept. In this regard, the aim of this research was to explore high achievers’ knowledge regarding the definition of the angle concept as well as to investigate their erroneous answers on the angle concept.

104 grade 6 students drawn from four well-established elementary schools of Yozgat, Turkey were participated in this research. All participants were selected via a purposive sampling method and their mathematics grades were 4 or 5 out of 5, and. Data were collected through four questions prepared by considering the learning competencies set out in the grade 6 curriculum in Turkey and the findings of previous studies whose purposes were to identify students’ misconceptions of the angle concept. The findings were analyzed by two researchers, and their inter-rater agreement was calculated as 0.91, or almost perfect. Thereafter, coding discrepancies were resolved, and consensus was established.

The angle concept is a multifaceted concept having static and dynamic definitions.The static definition of the angle refers to “the space between two rays” or“the intersection of two rays at the same end point” (Mitchelmore & White, 1998), whereas the dynamicdefinition of the angle concept highlights that the size of angle is the amountof rotation in direction (Fyhn, 2006). Since both definitionsrepresent two diverse situations and have unique limitations (Henderson & Taimina, 2005), students may holdmisconceptions about the angle concept. In this regard, the aim of thisresearch was to explore high achievers’ knowledge regarding the definition ofthe angle concept as well as to investigate their erroneous answers on theangle concept.

Enhancing the Manufacturing Knowledge of Undergraduate Engineering Students: A Case Study of a Design-Build-Test Challenge Involving Folding Bicycles

Many engineers currently in professional practice will have gained a degree level qualification which involved studying a curriculum heavy with mathematics and engineering science. While this knowledge is vital to the engineering design process so also is manufacturing knowledge, if the resulting designs are to be both technically and commercially viable.
The methodology advanced by the CDIO Initiative aims to improve engineering education by teaching in the context of Conceiving, Designing, Implementing and Operating products, processes or systems. A key element of this approach is the use of Design-Built-Test (DBT) projects as the core of an integrated curriculum. This approach facilitates the development of professional skills as well as the application of technical knowledge and skills developed in other parts of the degree programme. This approach also changes the role of lecturer to that of facilitator / coach in an active learning environment in which students gain concrete experiences that support their development.
The case study herein describes Mechanical Engineering undergraduate student involvement in the manufacture and assembly of concept and functional prototypes of a folding bicycle.

A new lead for nonpeptidic active-site-directed inhibitors of the severe acute respiratory syndrome coronavirus main protease discovered by a combination of screening and docking methods.

The coronavirus main protease, Mpro, is considered to be a major target for drugs suitable for combating coronavirus infections including severe acute respiratory syndrome (SARS). An HPLC-based screening of electrophilic compounds that was performed to identify potential Mpro inhibitors revealed etacrynic acid tert-butylamide (6a) as an effective nonpeptidic inhibitor. Docking studies suggested a binding mode in which the phenyl ring acts as a spacer bridging the inhibitor's activated double bond and its hydrophobic tert-butyl moiety. The latter is supposed to fit into the S4 pocket of the target protease. Furthermore, these studies revealed etacrynic acid amide (6b) as a promising lead for nonpeptidic active-site-directed Mpro inhibitors. In a fluorimetric enzyme assay using a novel fluorescence resonance energy transfer (FRET) pair labeled substrate, compound 6b showed a Ki value of 35.3 M. Since the novel lead compound does not target the S1', S1, and S2 subsites of the enzyme's substrate-binding pockets, there is room for improvement that underlines the lead character of compound 6b.

Obesity in People with Learning Disabilities: the impact of nurse led health screenings and health promotion activities

Background. Obesity appears to be more common among people with intellectual disabilities, with few studies focusing on achieving weight reduction. Aim. Firstly, to follow up people identified as overweight and obese following special health screening clinics and to determine the actions taken. Secondly, to evaluate the impact of health promotion classes on participants' weight loss. Methods. A clinic led by two learning disbaility nurses was held for all people aged 10 years and over (n=464) who attended special services within the area of one Health and Social Services Trust in Northern Ireland. In a second study, the nurses organised health promotion classes for 20 people over a 6 - 8 week period. Findings. The health screen identified 64% of adults and 26% of 10 - 19 year olds as being overweight or obese. Moreover, those aged 40 - 49 years who were obese had significantly higher levels of blood pressure. However, information obtained from a follow up questionnaire sent after 3 months suggested that of the 122 people identified for wiehgt reduciton, action had been taken for only 34% of them and only three were reported to have lost weight. The health promotion classes, however, led to a significant reduction in weight and body mass index scores. Conclusion. Health screening per se has limited impact on reducing obesity levels in this client group. Rather, health personnel such as general practitioners, nurses and health promotion staff need to work in partnership with service staff, carers and people with intellectual disabiltieis to create more active lifestyles.

The use of process simulation methods in support of organisational learning in availability contracting

Traditional business models in the aerospace industry are based on a conventional supplier to customer relationship based on the design, manufacture and subsequent delivery of the physical product. Service provision, from the manufacturer's perspective, is typically limited to the supply of procedural documentation and the provision of spare parts to the end user as the product passes through the latter stages of its intended lifecycle. Challenging economic and political conditions have resulted in end users re-structuring their core business activities, particularly in the defence sector. This has resulted in the need for original equipment manufacturers (OEMs) to integrate and manage support service activities in partnership with the customer to deliver platform availability. This improves the probability of commercial sustainability for the OEM through shared operational risks while reducing the cost of platform ownership for the customer. The need for OEMs to evolve their design, manufacture and supply strategies by focusing on customer requirements has revealed a need for reconstruction of traditional internal behaviours and design methodologies. Application of organisational learning is now a well recognised principle for innovative companies to achieve long term growth and sustained technical development, and hence, greater market command. It focuses on the process by which the organisation's knowledge and value base changes, leading to improved problem solving ability and capacity for action. From the perspective of availability contracting, knowledge and the processes by which it is generated, used and retained, become primary assets within the learning organisation. This paper will introduce the application of digital methods to asset management by demonstrating how the process of learning can benefit from a digital approach, how product and process design can be integrated within a virtual framework and finally how the approach can be applied in a service context.

Instructional Methods For Optimal Learning For An Aerospace Assembly Task: digital animation v pictogram-based instructions

Previous studies on work instruction delivery for complex assembly tasks have shown that the mode and delivery method for the instructions in an engineering context can influence both build time and product quality. The benefits of digital, animated instructional formats when compared to static pictures and text only formats have already been demonstrated. Although pictograms have found applications for relatively straight forward operations and activities, their applicability to relatively complex assembly tasks has yet to be demonstrated. This study compares animated instructions and pictograms for the assembly of an aircraft panel. Based around a series of build experiments, the work records build time as well as the number of media references to measure and compare build efficiency. The number of build errors and the time required to correct them is also recorded. The experiments included five participants completing five builds over five consecutive days for each media type. Results showed that on average the total build time was 13.1% lower for the group using animated instructions. The benefit of animated instructions on build time was most prominent in the first three builds, by build four this benefit had disappeared. There were a similar number of instructional references for the two groups over the five builds but the pictogram users required a lot more references during build 1. There were more errors among the group using pictograms requiring more time for corrections during the build.

An exploration of men’s experiences of undergoing active surveillance for favourable-risk prostate cancer: A mixed methods study protocol

Background
Prostate cancer is one of the most common male cancers worldwide. Active Surveillance (AS) has been developed to allow men with lower risk disease to postpone or avoid the adverse side effects associated with curative treatments until the disease progresses. Despite the medical benefits of AS, it is reported that living with untreated cancer can create a significant emotional burden for patients.

Methods/design
The aim of this study is to gain insight into the experiences of men eligible to undergo AS for favourable-risk PCa.

This study has a mixed-methods sequential explanatory design consisting of two phases: quantitative followed by qualitative. Phase 1 has a multiple point, prospective, longitudinal exploratory design. Ninety men diagnosed with favourable-risk prostate cancer will be assessed immediately post-diagnosis (baseline) and followed over a period of 12 months, in intervals of 3 month. Ninety age-matched men with no cancer diagnosis will also be recruited using peer nomination and followed up in the same 3 month intervals. Following completion of Phase 1, 10–15 AS participants who have reported both the best and worst psychological functioning will be invited to participate in semi-structured qualitative interviews. Phase 2 will facilitate further exploration of the quantitative results and obtain a richer understanding of participants’ personal interpretations of their illness and psychological wellbeing.

Discussion
To our knowledge, this is the first study to utilise early baseline measures; include a healthy comparison group; calculate sample size through power calculations; and use a mixed methods approach to gain a deeper more holistic insight into the experiences of men diagnosed with favourable-risk prostate cancer.