Safe fabrication of sharp gold tips for light emission in scanning tunnelling microscopy

Gold is the optimal tip metal for light emission in scanning tunnelling microscopy (LESTM) under ambient conditions. Sharp Au-tips of similar to 10nm radius were produced reliably using a safe, two-step etching method in 20% (w/w) CaCl2 solution. Previous CaCl2-based methods have tended to produce blunter tips, while other etching techniques that do produce sharp Au-tips, do so with the use of toxic or hazardous electrolytes. The tips are characterised using scanning electron microscopy and their efficacy in LESTM is evidenced by high-resolution, simultaneous topographic and photon mapping of Au(1 1 1)- and polycrystalline Au-surfaces. Spectra of the optical emission exhibit only one or two peaks with etched tips in contrast to the more complex spectra typical of cut tips; this feature, together with the highly symmetric geometry of the tips, facilitates a definitive analysis of the light emission process. (c) 2007 Elsevier B. V.. All rights reserved.

Common psychology problems in cerebral palsy

Cerebral palsy (CP) refers to a collection of motor impairments which result in abnormal posture and movement following an insult or damage to the developing brain. Psychological adjustment in children with CP is under researched with little population-based or longitudinal data, but there is sufficient evidence to suggest that children with CP are at increased risk for psychological problems. The types of difficulties they experience include emotional, hyperactivity and peer problems with conduct disorder being more prevalent in mildly affected children. The origins of psychological problems in this group are complex but include ‘disease’ and ‘psychosocial’ factors related to having a brain-based disability in the family, as well as other factors that influence adjustment in all children. There are no intervention studies in children with CP aimed at preventing psychological problems or promoting mental wellbeing. However, evidence from other work suggests it is possible to work with the child and family to develop skills, manage symptoms, and build confidence and resilience. Acting as early as possible has been found to be beneficial for bonding, child development and reducing parental anxiety.

Pharmacogenomic studies of the anticancer and immunosuppressive thiopurines mercaptopurine and azathioprine.

AIMS
To examine the allelic variation of three enzymes involved in 6-mercaptopurine/azathioprine (6-MP/AZA) metabolism and evaluate the in?uence of these polymorphisms on toxicity, haematological parameters and metabolite levels in patients with acute lymphoblastic leukaemia (ALL) or in?ammatory bowel disease (IBD).
METHODS
Clinical data and blood samples were collected from 19 ALL paediatric patients and 35 IBD patients who were receiving 6-MP/AZA therapy. All patients were screened for seven genetic polymorphisms in three enzymes involved in mercaptopurine metabolism [xanthine oxidase, inosine triphosphatase (C94?A and IVS2+21A?C) and thiopurine methyltransferase]. Erythrocyte and plasma metabolite concentrations were also determined. The associations between the various genotypes and myelotoxicity, haematological parameters and metabolite concentrations were determined.
RESULTS
Thiopurine methyltransferase variant alleles were associated with a preferential metabolism away from 6-methylmercaptopurine nucleotides (P = 0.008 in ALL patients,P = 0.038 in IBD patients) favouring 6-thioguanine nucleotides (6-TGNs) (P = 0.021 in ALL patients). Interestingly, carriers of inosine triphosphatase IVS2+21A?C variants among ALL and IBD patients had signi?cantly higher concentrations of the active cytotoxic metabolites, 6-TGNs (P = 0.008 in ALL patients,P = 0.047 in IBD patients). The study con?rmed the association of thiopurine methyltransferase heterozygosity with leucopenia and neutropenia in ALL patients and reported a signi?cant association between inosine triphosphatase IVS2+21A?C variants with thrombocytopenia (P = 0.012).
CONCLUSIONS
Pharmacogenetic polymorphisms in the 6-MP pathway may help identify patients at risk for associated toxicities and may serve as a guide for dose
individualization.

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu²⁺ and Ni²⁺ from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5–100 mg/L. The pH of the solutions containing either Cu²⁺ or Ni²⁺ was varied over a range of 2–8. The adsorption of Cu²⁺ and Ni⁺² on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu²⁺ and 14.5 mg/g for Ni²⁺ at 298 K when the initial concentration for both Cu²⁺ and Ni²⁺ was 100 mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2 mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.

Influence of ABCB1 polymorphisms and haplotypes on tacrolimus nephrotoxicity and dosage requirements in children with liver transplant

AIMS
The aim of this study was to investigate the in?uence of genetic polymorphisms in ABCB1 on the incidence of nephrotoxicity and tacrolimus dosage-requirements in paediatric patients following liver transplantation.
METHODS
Fifty-one paediatric liver transplant recipients receiving tacrolimus were genotyped for ABCB1 C1236>T, G2677>T and C3435>T polymorphisms. Dose-adjusted tacrolimus trough concentrations and estimated glomerular ?ltration rates (EGFR) indicative of renal toxicity were determined and correlated with the corresponding genotypes.
RESULTS
The present study revealed a higher incidence of the ABCB1 variant-alleles examined among patients with renal dysfunction (30% reduction in EGFR) at 6 months post-transplantation (1236T allele: 63.3% vs 37.5% in controls,P = 0.019; 2677T allele: 63.3% vs. 35.9%, p = 0.012; 3435T allele: 60% vs. 39.1%,P = 0.057). Carriers of the G2677->T variant allele also had a signi?cant reduction (%) in EGFR at 12 months post-transplant (mean difference = 22.6%; P = 0.031). Haplotype analysis showed a signi?cant association between T-T-T haplotypes and an increased incidence of nephrotoxicity at 6 months post-transplantation (haplotype-frequency = 52.9% in nephrotoxic patients vs 29.4% in controls; P = 0.029). Furthermore, G2677->T and C3435->T polymorphisms and T-T-T haplotypes were signi?cantly correlated with higher tacrolimus dose-adjusted pre-dose concentrations at various time points examined long after drug initiation.
CONCLUSIONS
These ?ndings suggest that ABCB1 polymorphisms in the native intestine signi?cantly in?uence tacrolimus dosage-requirement in the stable phase after transplantation. In addition, ABCB1 polymorphisms in paediatric liver transplant recipients may predispose them to nephrotoxicity over the ?rst year posttransplantation. Genotyping future transplant recipients for ABCB1 polymorphisms, therefore, could have the potential to individualize better tacrolimus immunosuppressive therapy and enhance drug safety

Bystander-induced differentiation: a major response to targeted irradiation of a urothelial explant model.

A ureter primary explant technique, using porcine tissue sections was developed to study bystander effects under in vivo like conditions where dividing and differentiated cells are present. Targeted irradiations of ureter tissue fragments were performed with the Gray Cancer Institute charged particle microbeam at a single location (2 microm precision) with 10 3He2+ particles (5 MeV; LET 70 keV/microm). After irradiation the ureter tissue section was incubated for 7 days allowing explant outgrowth to be formed. Differentiation was estimated using antibodies to Uroplakin III, a specific marker of terminal urothelial differentiation. Even although only a single region of the tissue section was targeted, thousands of additional cells were found to undergo bystander-induced differentiation in the explant outgrowth. This resulted in an overall increase in the fraction of differentiated cells from 63.5+/-5.4% to 76.6+/-5.6%. These changes are much greater than that observed for the induction of damage in this model. One interpretation of these results is that in the tissue environment, differentiation is a much more significant response to targeted irradiation and potentially a protective mechanism.

Transesterification of vegetable oils on basic large mesoporous alumina supported alkaline fluorides-Evidences of the nature of the active site and catalytic performances

KF, LiF and CsF/A(2)O(3) catalysts with different loadings from 1 to 20 wt% were prepared using aqueous solutions of the alkaline fluoride compounds by wet impregnation of basic mesoporous MSU-type alumina. The catalysts were activated under At at 400 degrees C for 2 h and monitored by in situ XRD measurements. The catalysts were also characterized using several techniques: N-2 adsorption/desorption isotherms at -196 degrees C, FTIR, DR-UV-vis, CO2-TPD, XRD, Al-27 CP/MAS NMR. These characterizations led to the conclusion that the deposition of alkaline fluorides on the alumina surface generates fluoroaluminates and aluminate species. The process is definitivated at 400 degrees C. The fluorine in these structures is less basic than in the parent fluorides, but the oxygen becomes more basic. The catalysts were tested for the transesterification of fatty esters under different experimental conditions using conventional heating, microwave and Ultrasound irradiation. Recycling experiments showed that these catalysts are stable for a limited number of cycles. (C) 2009 Elsevier Inc. All rights reserved.

X-ray diffraction, optical microscopy, and microhardness studies of gas nitrided titanium alloys and titanium aluminide

Thermochemical surface gas nitriding of ß21s, Timetal 205 and a Ti–Al alloy was conducted using differential scanning calorimeter equipment, in nominally pure nitrogen at 850 °C and 950 °C (ß21s), 730 °C and 830 °C (Timetal 205), and 950 °C and 1050 °C (Ti–Al) for 1 h, 3 h and 5 h. X-ray diffraction analyses showed new phases formed in the nitrided layer, depending on the alloy and the time and the temperature of nitriding. Microstructures were analyzed using optical microscopy. Cross-sectional microhardness profiles of cross-sectional samples after nitriding were obtained using a Knoop indenter.

Genetic programming based formulation for fresh and hardened properties of self-compacting concrete containing pulverised fuel ash

Self-compacting concrete (SCC) flows into place and around obstructions under its own weight to fill the formwork completely and self-compact without any segregation and blocking. Elimination of the need for compaction leads to better quality concrete and substantial improvement of working conditions. This investigation aimed to show possible applicability of genetic programming (GP) to model and formulate the fresh and hardened properties of self-compacting concrete (SCC) containing pulverised fuel ash (PFA) based on experimental data. Twenty-six mixes were made with 0.38 to 0.72 water-to-binder ratio (W/B), 183–317 kg/m³ of cement content, 29–261 kg/m³ of PFA, and 0 to 1% of superplasticizer, by mass of powder. Parameters of SCC mixes modelled by genetic programming were the slump flow, JRing combined to the Orimet, JRing combined to cone, and the compressive strength at 7, 28 and 90 days. GP is constructed of training and testing data using the experimental results obtained in this study. The results of genetic programming models are compared with experimental results and are found to be quite accurate. GP has showed a strong potential as a feasible tool for modelling the fresh properties and the compressive strength of SCC containing PFA and produced analytical prediction of these properties as a function as the mix ingredients. Results showed that the GP model thus developed is not only capable of accurately predicting the slump flow, JRing combined to the Orimet, JRing combined to cone, and the compressive strength used in the training process, but it can also effectively predict the above properties for new mixes designed within the practical range with the variation of mix ingredients.

The experience of cancer cachexia: A qualitative study of advanced cancer patients and their family members

Background
Cachexia in advanced malignancy is a debilitating syndrome which contributes to approximately two million deaths worldwide annually. In spite of advances in understanding the biomedical aspects of cancer cachexia, little attention has been paid to exploring its holistic impact on patients and those who care for them.

Objective
The aim of this paper is to describe the lived experience of cachexia from the perspective of patients with cancer and their family members.

Design
An interpretative phenomenological approach was employed.

Setting and participants
A purposive sampling strategy recruited 15 patients and 12 family members from the Regional Cancer Centre in Northern Ireland.

Method
Each participant was interviewed during 2004/2005 using an unstructured interview. All interviews were recorded and transcribed verbatim. Analysis combined a two stage approach using thematic and interpretative phenomenological analysis.

Results
Analysis generated six superordinate themes that reflected the complex dynamics of the cachexia experience. Themes were: physiological changes in appetite; visuality of cachexia; weight loss interpreted as a bad sign; response from health care professionals; conflict over food; and coping responses.

Conclusions
Findings confirmed that cancer cachexia has far reaching implications for patients and their families, extending beyond physical problems into psychological, social and emotional issues. This insight is a critical first step in the development of more responsive care for these clients.

Effects of Constraint Errors on Parallel Manipulators with Decoupled Motion

From perspective of structure synthesis, certain special geometric constraints, such as joint axes intersecting at one point or perpendicular to each other, are necessary in realizing the end-effector motion of kinematically decoupled parallel manipulators (PMs) along individual motion axes. These requirements are difficult to achieve in the actual system due to assembly errors and manufacturing tolerances. Those errors that violate the geometric constraint requirements are termed “constraint errors”. The constraint errors usually are more troublesome than other manipulator errors because the decoupled motion characteristics of the manipulator may no longer exist and the decoupled kinematic models will be rendered useless due to these constraint errors. Therefore, identification and prevention of these constraint errors in initial design and manufacturing stage are of great significance. In this article, three basic types of constraint errors are identified, and an approach to evaluate the effects of constraint errors on decoupling characteristics of PMs is proposed. This approach is illustrated by a 6-DOF PM with decoupled translation and rotation. The results show that the proposed evaluation method is effective to guide design and assembly.

High tech start-ups in University Science Park incubators: The relationship between the start-up’s lifecycle progression and use of the incubator’s resources

University Science Park incubators (USIs) have emerged as a means by which Government, academia and business can develop high technology business firms (spin out HTBFs) from initial conception through to becoming established small firms, which are ready to move beyond the Science Park confines. Although there is considerable literature on how USIs can be improved and developed there is a paucity of studies, which explore how lifecycle development within HTBFs in USIs can affect how they use the unique resources and opportunities of the USI. Moreover, there is a focus on single point in time studies, which do not adequately investigate the longitudinal dynamics of HTBF lifecycle development within USIs. Therefore, the aim of this paper is to explore the longitudinal use of the unique resources of the USI by HTBFs at different lifecycle stages. The research methodology involved 18 HTBFs within two separate USIs. A series of longitudinal interviews and focus groups were conducted with HTBFs and USI staff over a 36-month period. NUD*IST software was used in developing the coding and analysis of transcripts. The results show that a HTBF's propensity to make effective use of the USI's resources and support increases as the lifecycle stage of the company increases and the small-firm searches for independence and autonomy. Therefore, further research is required to investigate the following two outstanding questions; firstly, which usage pattern is associated with the HTBF's ultimate success or failure in the marketplace? And secondly, are there any services missing from the observed array that the USI could provide to enhance the HTBF's degree of ultimate success? © 2007 Elsevier Ltd. All rights reserved.