Stereotypes of Age Differences in Personality Traits: Universal and Accurate?

Age trajectories for personality traits are known to be similar across cultures. To address whether stereotypes of age groups reflect these age-related changes in personality, we asked participants in 26 countries (N = 3,323) to rate typical adolescents, adults, and old persons in their own country. Raters across nations tended to share similar beliefs about different age groups; adolescents were seen as impulsive, rebellious, undisciplined, preferring excitement and novelty, whereas old people were consistently considered lower on impulsivity, activity, antagonism, and Openness. These consensual age group stereotypes correlated strongly with published age differences on the five major dimensions of personality and most of 30 specific traits, using as criteria of accuracy both self-reports and observer ratings, different survey methodologies, and data from up to 50 nations. However, personal stereotypes were considerably less accurate, and consensual stereotypes tended to exaggerate differences across age groups.

A qualitative enquiry into the appropriation of mobile telephony at the bottom of the pyramid

Purpose: The paper aims to analyse Bottom of the Pyramid (BoP) customers’ (e.g. Bangladeshi farmers) use and appropriation of mobile telephony and to critically identify a suitable research strategy for such investigation.

Design/methodology/approach: Concentrated ethnographic immersion was combined with both methodological and investigator triangulation during a four-month period of fieldwork conducted in Bangladeshi villages to obtain more robust findings. Concentrated immersion was required to achieve relatively speedier engagement owing to the difficulty in engaging with respondents on a long-term basis.

Findings: The farmers’ use of mobile telephony went beyond the initial adoption, as they appropriated it through social and institutional support, inventive means and/or changes in their own lifestyle. The paper argues that technology appropriation, being a result of the mutual shaping of technology, human skills and abilities and macro-environmental factors, enables users to achieve desired outcomes which may not always be the ones envisaged by the original designers.

Research limitations/implications: The paper contributes to two major areas: first, it identifies technology appropriation as an important and emerging concept in international marketing research; second, it suggests a concentrated form of ethnographic engagement for studying technology appropriation in a developing country context.

Practical implications: A good understanding of the dynamic interplay between users’ skills and abilities, social contexts and technological artefacts/applications is required in order for businesses to serve BoP customers profitably.

Originality/value: The paper presents a dynamic model of technology appropriation based on findings collected through a pragmatic approach by combining concentrated ethnographic immersion with methodological and investigator triangulation

Behavioural and physiological responses of heifer calves to acute stressors: long-term consistency and relationship with adult reactivity to milking

The present study investigated the long-term consistency of individual differences in dairy cattles’ responses in tests of behavioural and hypothalamo–pituitary–adrenocortical (HPA) axis reactivity, as well as the relationship between responsiveness in behavioural tests and the reaction to first milking. Two cohorts of heifer calves, Cohorts 1 (N = 25) and 2 (N = 16), respectively, were examined longitudinally from the rearing period until adulthood. Cohort 1 heifers were subjected to open field (OF), novel object (NO), restraint, and response to a human tests at 7 months of age, and were again observed in an OF test during first pregnancy between 22 and 24 months of age. Subsequently, inhibition of milk ejection and stepping and kicking behaviours were recorded in Cohort 1 heifers during their first machine milking. Cohort 2 heifers were individually subjected to OF and NO tests as well as two HPA axis reactivity tests (determining ACTH and/or cortisol response profiles after administration of exogenous CRH and ACTH, respectively) at 6 months of age and during first lactation at approximately 29 months of age. Principal component analysis (PCA) was used to condense correlated response measures (to behavioural tests and to milking) within ages into independent dimensions underlying heifers’ reactivity. Heifers demonstrated consistent individual differences in locomotion and vocalisation during an OF test from rearing to first pregnancy (Cohort 1) or first lactation (Cohort 2). Individual differences in struggling in a restraint test at 7 months of age reliably predicted those in OF locomotion during first pregnancy in Cohort 1 heifers. Cohort 2 animals with high cortisol responses to OF and NO tests and high avoidance of the novel object at 6 months of age also exhibited enhanced cortisol responses to OF and NO tests at 29 months of age. Measures of HPA axis reactivity, locomotion, vocalisation and adrenocortical and behavioural responses to novelty were largely uncorrelated, supporting the idea that stress responsiveness in dairy cows is mediated by multiple independent underlying traits. Inhibition of milk ejection and stepping and kicking behaviours during first machine milking were not related to earlier struggling during restraint, locomotor responses to OF and NO tests, or the behavioural interaction with a novel object. Heifers with high rates of OF and NO vocalisation and short latencies to first contact with the human at 7 months of age exhibited better milk ejection during first machine milking. This suggests that low underlying sociality might be implicated in the inhibition of milk ejection at the beginning of lactation in heifers.

MALTS: A Tool to Simulate Lorentz Transmission Electron Microscopy From Micromagnetic Simulations

Here we describe the development of the MALTS software which is a generalized tool that simulates Lorentz Transmission Electron Microscopy (LTEM) contrast of magnetic nanostructures. Complex magnetic nanostructures typically have multiple stable domain structures. MALTS works in conjunction with the open access micromagnetic software Object Oriented Micromagnetic Framework or MuMax. Magnetically stable trial magnetization states of the object of interest are input into MALTS and simulated LTEM images are output. MALTS computes the magnetic and electric phases accrued by the transmitted electrons via the Aharonov-Bohm expressions. Transfer and envelope functions are used to simulate the progression of the electron wave through the microscope lenses. The final contrast image due to these effects is determined by Fourier Optics. Similar approaches have been used previously for simulations of specific cases of LTEM contrast. The novelty here is the integration with micromagnetic codes via a simple user interface enabling the computation of the contrast from any structure. The output from MALTS is in good agreement with both experimental data and published LTEM simulations. A widely-available generalized code for the analysis of Lorentz contrast is a much needed step towards the use of LTEM as a standardized laboratory technique.

Maintaining design intent for aircraft manufacture

Design and manufacture of aircraft requires deep multi-disciplinary understanding of system behaviour. The intention of the designer can get lost due to the many changes occurring to the product and the inability of the methods and tools used to capture it. Systems engineering and optimisation tools underpin industrial approaches to design, but are not without issue. The challenge is to find a route from concept to manufacture which enables designers to maintain their original intent. The novelty in this work is that the parameterisation used to build the CAD model reflects the manufacturing capability, ensuring design intent is maintained from concept to manufacture.

An optimal algorithm for low power multiplierless FIR filter design using chebychev criterion

In this paper, we propose a novel finite impulse response (FIR) filter design methodology that reduces the number of operations with a motivation to reduce power consumption and enhance performance. The novelty of our approach lies in the generation of filter coefficients such that they conform to a given low-power architecture, while meeting the given filter specifications. The proposed algorithm is formulated as a mixed integer linear programming problem that minimizes chebychev error and synthesizes coefficients which consist of pre-specified alphabets. The new modified coefficients can be used for low-power VLSI implementation of vector scaling operations such as FIR filtering using computation sharing multiplier (CSHM). Simulations in 0.25um technology show that CSHM FIR filter architecture can result in 55% power and 34% speed improvement compared to carry save multiplier (CSAM) based filters.

Low-Power Process-Variation Tolerant Arithmetic Units Using Input-Based Elastic Clocking

In this paper we propose a design methodology for low-power high-performance, process-variation tolerant architecture for arithmetic units. The novelty of our approach lies in the fact that possible delay failures due to process variations and/or voltage scaling are predicted in advance and addressed by employing an elastic clocking technique. The prediction mechanism exploits the dependence of delay of arithmetic units upon input data patterns and identifies specific inputs that activate the critical path. Under iso-yield conditions, the proposed design operates at a lower scaled down Vdd without any performance degradation, while it ensures a superlative yield under a design style employing nominal supply and transistor threshold voltage. Simulation results show power savings of upto 29%, energy per computation savings of upto 25.5% and yield enhancement of upto 11.1% compared to the conventional adders and multipliers implemented in the 70nm BPTM technology. We incorporated the proposed modules in the execution unit of a five stage DLX pipeline to measure performance using SPEC2000 benchmarks [9]. Maximum area and throughput penalty obtained were 10% and 3% respectively.

The emergence of bone technologies at the end of the pleistocene in Southeast Asia:Regional and evolutionary implications

For many decades Palaeolithic research viewed the development of early modern human behaviour as largely one of progress down a path towards the modernity of the present. The European Palaeolithic sequence the most extensively studied was for a long time the yard-stick against which records from other regions were judged. Recent work undertaken in Africa and increasingly Asia, however, now suggests that the European evidence may tell a story that is more parochial and less universal than previously thought. While tracking developments at the large scale (the grand narrative) remains important, there is growing appreciation that to achieve a comprehensive understanding of human behavioural evolution requires an archaeologically regional perspective to balance this. One of the apparent markers of human modernity that has been sought in the global Palaeolithic record, prompted by finds in the European sequence, is innovation in bonebased technologies. As one step in the process of re-evaluating and contextualizing such innovations, in this article we explore the role of prehistoric bone technologies within the Southeast Asian sequence, where they have at least comparable antiquity to Europe and other parts of Asia. We observe a shift in the technological usage of bone from a minor component to a medium of choice during the second half of the Last Termination and into the Holocene. We suggest that this is consistent with it becoming a focus of the kinds of inventive behaviour demanded of foraging communities as they adapted to the far-reaching environmental and demographic changes that were reshaping this region at that time. This record represents one small element of a much wider, much longerterm adaptive process, which we would argue is not confined to the earliest instances of a particular technology or behaviour, but which forms part of an on-going story of our behavioural evolution. © 2012 The McDonald Institute for Archaeological Research.

Development of a Vehicle-Bridge-Soil Dynamic Interaction Model for Scour Damage Modelling

Damage detection in bridges using vibration-based methods is an area of growing research interest. Improved assessment
methodologies combined with state-of-the-art sensor technology are rapidly making these approaches applicable for real-world
structures. Applying these techniques to the detection and monitoring of scour around bridge foundations has remained
challenging; however this area has gained attraction in recent years. Several authors have investigated a range of methods but
there is still significant work required to achieve a rounded and widely applicable methodology to detect and monitor scour.This
paper presents a novel Vehicle-Bridge-Soil Dynamic Interaction (VBSDI) model which can be used to simulate the effect of scour
on an integral bridge. The model outputs dynamic signals which can be analysed to determine modal parameters and the variation
of these parameters with respect to scour can be examined.The key novelty of this model is that it is the first numerical model for
simulating scour that combines a realistic vehicle loadingmodel with a robust foundation soil responsemodel.This paper provides a
description of the model development and explains the mathematical theory underlying themodel. Finally a case study application
of the model using typical bridge, soil, and vehicle properties is provided.

Mixing Enthalpy for Binary Mixtures Containing Ionic Liquids

A complete review of the published data on the mixing enthalpies of mixtures containing ionic liquids, measured directly using calorimetric techniques, is presented in this paper. The field of ionic liquids is very active and a number of research groups in the world are dealing with different applications of these fluids in the fields of chemistry, chemical engineering, energy, gas storage and separation or materials science. In all these fields, the knowledge of the energetics of mixing is capital both to understand the interactions between these fluids and the different substrates and also to establish the energy and environmental cost of possible applications. Due to the relative novelty of the field, the published data is sometimes controversial and recent reviews are fragmentary and do not represent a set of reliable data. This fact can be attributed to different reasons: (i) difficulties in controlling the purity and stability of the ionic liquid samples; (ii) availability of accurate experimental techniques, appropriate for the measurement of viscous, charged, complex fluids; and (iii) choice of an appropriate clear thermodynamic formalism to be used by an interdisciplinary scientific community. In this paper, we address all these points and propose a critical review of the published data, advise on the most appropriate apparatus and experimental procedure to measure this type of physical-chemical data in ionic liquids as well as the way to treat the information obtained by an appropriate thermodynamic formalism.

Microbial community of black band disease on infection, healthy and dead part of scleractinian Montipora sp. colony at Seribu islands, Indonesia

It is crucial to understand the microbial community associated with the host when attempting to discern the pathogen responsible for disease outbreaks in scleractinian corals. This study determines changes in the bacterial community associated with Montipora sp. in response to black band disease in Indonesian waters. Healthy, diseased, and dead Montipora sp. (n = 3 for each sample type per location) were collected from three different locations (Pari Island, Pramuka Island, and Peteloran Island). DGGE (Denaturing Gradient Gel Electrophoresis) was carried out to identify the bacterial community associated with each sample type and histological analysis was conducted to identify pathogens associated with specific tissues. Various Desulfovibrio species were found as novelty to be associated with infection samples, including Desulfovibrio desulfuricans, Desulfovibrio magneticus, and Desulfovibrio gigas, Bacillus benzoevorans, Bacillus farraginis in genus which previously associated with pathogenicity in corals. Various bacterial species associated with uninfected corals were lost in diseased and dead samples. Unlike healthy samples, coral tissues such as the epidermis, endodermis, zooxanthellae were not present on dead samples under histological observation. Liberated zooxanthellae and cyanobacteria were found in black band diseased Montipora sp. samples.

The History of Arsaces, Prince of Betlis

Recounting the eventful travels of Selim, an intrepid young Arab who runs away from his parental home to learn about the world, The History of Arsaces, Prince of Betlis (1774) by the Co. Limerick-born Charles Johnston (c.1719–c.1800) is an inventive mixture of fictional genres and styles: romance, satire, sentimental narrative and oriental fantasy. The novel appeared at a politically charged moment, on the eve of the American revolutionary war and in the aftermath of the Bengal famine of 1769–70, world events that were linked by the nefarious operations of the ubiquitous East India Company. These momentous occurrences, polarising public opinion and stimulating Irish patriot sympathies in the mid-70s, provide the undercurrent to Johnston’s thoughtful examination of war, commerce, and empire through the lens of a fictional ‘history’. Enclosing a series of tales within tales, Johnston’s oriental romance offers its readers a remarkable concoction of Gulliver-inspired fantasy, political satire and moral reflection, played out within an expansive historical and geographical setting. As the Monthly Review, or, Literary Journal commented on its first appearance in 1774, The History of Arsaces provided ‘striking intimations, of the utmost national importance, with respect to over-grown empire, and colony connexions’.