The role of microneedles for drug and vaccine delivery

INTRODUCTION: Transdermal drug delivery offers a number of advantages for the patient, not only due to its non-invasive and convenient nature, but also due to factors such as avoidance of first-pass metabolism and prevention of gastrointestinal degradation. It has been demonstrated that microneedles (MNs) can increase the number of compounds amenable to transdermal delivery by penetrating the skin's protective barrier, the stratum corneum, and creating a pathway for drug permeation to the dermal tissue below.

AREAS COVERED: MNs have been extensively investigated for drug and vaccine delivery. The different types of MN arrays and their delivery capabilities are discussed in terms of drugs, including biopharmaceutics and vaccines. Patient usage and effects on the skin are also considered.

EXPERT OPINION: MN research and development is now at the stage where commercialisation is a viable possibility. There are a number of long-term safety questions relating to patient usage which will need to be addressed moving forward. Regulatory guidance is awaited to direct the scale-up of the manufacturing process alongside provision of clearer patient instruction for safe and effective use of MN devices.

A novel scalable manufacturing process for the production of hydrogel-forming microneedle arrays

A novel manufacturing process for fabricating microneedle arrays (MN) has been designed and evaluated. The prototype is able to successfully produce 14 × 14 MN arrays and is easily capable of scale-up, enabling the transition from laboratory to industry and subsequent commercialisation. The method requires the custom design of metal MN master templates to produce silicone MN moulds using an injection moulding process. The MN arrays produced using this novel method was compared with centrifugation, the traditional method of producing aqueous hydrogel-forming MN arrays. The results proved that there was negligible difference between either methods, with each producing MN arrays with comparable quality. Both types of MN arrays can be successfully inserted in a skin simulant. In both cases the insertion depth was approximately 60% of the needle length and the height reduction after insertion was in both cases approximately 3%.

Additionality of Incubator Support on Networks of University Spin-Out Firms

The formation rate of university spin-out firms has increased markedly over the past decade. While this is seen as an important channel for the commercialisation of academic research, concerns have centred around high failure rates and no-to-low growth among those which survive compared to other new technology based firms. Universities have responded to this by investing in incubators to assist spin-outs to overcome their liability of newness. Yet how effective are incubators in supporting these firms? Here we examine this in terms of the structural networks that spin-out firms form, the role of the incubator in this and the effect of this on the spin-out process.

Recycling of demolition waste in Merseyside

There have been considerable developments in Merseyside over the last fifteen years with regards to the commercialisation of recycled demolition aggregate. Liverpool is an urban region that at the time was undergoing regeneration. This required the demolition of old infrastructure. Subsequent reconstruction required new construction materials. A project started in 2001 to investigate the economics, practicalities and technicalities of using recycled demolition aggregates in concrete precast products. It was estimated that if all six demolition contractors around Liverpool worked round the clock (i.e. assuming there was enough feed material) they would still have found it difficult to maintain the required supplies for a single precast factory. Investment in equipment was therefore required to guarantee supply and improve the quality of the recycled demolition aggregate. The market forces and the incentives/drivers for construction companies to adopt sustainable practises have encouraged investment of several million pounds to be made in new recycling plants and has resulted in ‘urban quarries’. This paper describes the developments in recycling of construction and demolition waste over the last decade in Merseyside and shows that recycling is not only sustainable but also profitable.

Knowledge Transfer in Quadruple Helix Ecosystems: An Absorptive Capacity Perspective

Increased understanding of knowledge transfer (KT) from universities to the wider regional knowledge ecosystem offers opportunities for increased regional innovation and commercialisation. The aim of this article is to improve the understanding of the KT phenomena in an open innovation context where multiple diverse quadruple helix stakeholders are interacting. An absorptive capacity-based conceptual framework is proposed, using a priori constructs which portrays the multidimensional process of KT between universities and its constituent stakeholders in pursuit of open innovation and commercialisation. Given the lack of overarching theory in the field, an exploratory, inductive theory building methodology was adopted using semi-structured interviews, document analysis and longitudinal observation data over a three-year period. The findings identify five factors, namely human centric factors, organisational factors, knowledge characteristics, power relationships and network characteristics, which mediate both the ability of stakeholders to engage in KT and the effectiveness of knowledge acquisition, assimilation, transformation and exploitation. This research has implications for policy makers and practitioners by identifying the need to implement interventions to overcome the barriers to KT effectiveness between regional quadruple helix stakeholders within an open innovation ecosystem.

Microneedle arrays as transdermal and intradermal drug delivery systems: Materials science, manufacture and commercial development

Transdermal drug delivery offers a number of advantages for the patient, due not only its non-invasive and convenient nature, but also factors such as avoidance of first pass metabolism and prevention of gastrointestinal degradation. It has been demonstrated that microneedle arrays can increase the number of compounds amenable to transdermal delivery by penetrating the skin's protective barrier, the stratum corneum, and creating a pathway for drug permeation to the dermal tissue below. Microneedles have been extensively investigated in recent decades for drug and vaccine delivery as well as minimally invasive patient monitoring/diagnosis. This review focuses on a range of critically important aspects of microneedle technology, namely their material composition, manufacturing techniques, methods of evaluation and commercial translation to the clinic for patient benefit and economic return. Microneedle research and development is finally now at the stage where commercialisation is a realistic possibility. However, progress is still required in the areas of scaled-up manufacture and regulatory approval.

Future of the transdermal drug delivery market – have we barely touched the surface?

Introduction: Transdermal drug delivery is themovement of drugs across the skin for absorption into the systemic circulation. Transfer of the drug can occur via passive or active means; passive trans- dermal products donot disrupt the stratumcorneumto facilitate deliverywhereas active technologies do. Due to the very specific physicochemical properties necessary for successful passive transdermal drug delivery, this sector of the pharmaceutical industry is relatively small. There are many well-documented benefits of this delivery route however, and as a result there is great interest in increasing the number of therapeutic substances that can be delivered transdermally. Areas Covered: This review discusses the various transdermal products that are currently/have been marketed, and the paths that led to their success, or lack of. Both passive and active transdermal technologies are considered with the advantages and limitations of each high- lighted. In addition to marketed products, technologies that are in the investigative stages by various pharmaceutical companies are reviewed. Expert Opinion: Passive transdermal drug delivery has made limited progress in recent years, however with the ongoing intense research into active technologies, there is great potential for growth within the transdermal delivery market. A number of active technologies have already been translated into marketed products, with other platforms including microneedles, rapidly progressing towards commercialisation.

Psychological determinants of consumer acceptance of personalised nutrition in 9 European countries

OBJECTIVE: To develop a model of the psychological factors which predict people's intention to adopt personalised nutrition. Potential determinants of adoption included perceived risk and benefit, perceived self-efficacy, internal locus of control and health commitment.

METHODS: A questionnaire, developed from exploratory study data and the existing theoretical literature, and including validated psychological scales was administered to N=9381 participants from 9 European countries (Germany, Greece, Ireland, Poland, Portugal, Spain, the Netherlands, the UK, and Norway).

RESULTS: Structural equation modelling indicated that the greater participants' perceived benefits to be associated with personalised nutrition, the more positive their attitudes were towards personalised nutrition, and the greater their intention to adopt it. Higher levels of nutrition self-efficacy were related to more positive attitudes towards, and a greater expressed intention to adopt, personalised nutrition. Other constructs positively impacting attitudes towards personalised nutrition included more positive perceptions of the efficacy of regulatory control to protect consumers (e.g. in relation to personal data protection), higher self-reported internal health locus of control, and health commitment. Although higher perceived risk had a negative relationship with attitude and an inverse relationship with perceived benefit, its effects on attitude and intention to adopt personalised nutrition was less influential than perceived benefit. The model was stable across the different European countries, suggesting that psychological factors determining adoption of personalised nutrition have generic applicability across different European countries.

CONCLUSION: The results suggest that transparent provision of information about potential benefits, and protection of consumers' personal data is important for adoption, delivery of public health benefits, and commercialisation of personalised nutrition.

Advances in single-shot, dry drilling of composite/metal stacks

Carbon fibre reinforced polymers (CFRP) are increasingly being used in the aerospace, automotive and defence industry due to their high specific stiffness and good corrosion resistance. In a modern aircraft, 50-60% of its structure is made up of CFRP material while the remainder is mostly a combination of metallic alloys (typically aluminium or titanium alloys). Mechanical fastening (bolting or riveting) of CFRP and metallic components has thus created a pressing requirement of drilling several thousand holes per aircraft. Drilling of stacks in a single-shot not only saves time, but also ensures proper alignment when fasteners are inserted, achieving tighter geometric tolerances. However, this requirement poses formidable manufacturing challenges due to the fundamental differences in the material properties of CFRP and metals e.g. a drill bit entering into the stack encounters brittle and abrasive CFRP material as well as the plastic behaviour of the metallic alloy, making the drilling process highly non-linear.

Over the past few years substantial efforts have been made in this direction and majority of the research has tried to establish links between how the process parameters (feed, depth of cut, cutting speed), tooling (geometry, material and coating) and the wear of the cutting tool affect the hole quality. Similarly, multitudes of investigations have been conducted to determine the effects of non-traditional drilling methods (orbital, helical and vibration assisted drilling), cutting zone temperatures and efficiency of chip extraction on the hole quality and rate of tool wear during single shot drilling of CFRP/alloy stacks.

In a timely effort, this paper aims at reviewing the manufacturing challenges and barriers faced when drilling CFRP/alloy stacks and to summarise various factors influencing the drilling process while detailing the advances made in this fertile research area of single-shot drilling of stack materials. A survey of the key challenges associated with avoiding workpiece damage and the effect these challenges have on tool design and process optimisation is presented. An in depth critique of suitable hole making methods and their aptness for commercialisation follows. The paper concludes by summarising the future work required to achieve repeatable, high quality single shot drilled holes in CFRP/alloy stacks.