Design and testing of transonic linear cascade tunnel with optimized slotted walls

In linear cascade wind tunnel tests, a high level of pitchwise periodicity is desirable to reproduce the azimuthal periodicity in the stage of an axial compressor or turbine. Transonic tests in a cascade wind tunnel with open jet boundaries have been shown to suffer from spurious waves, reflected at the jet boundary, that compromise the flow periodicity in pitch. This problem can be tackled by placing at this boundary a slotted tailboard with a specific wall void ratio s and pitch angle a. The optimal value of the s-a pair depends on the test section geometry and on the tunnel running conditions. An inviscid two-dimensional numerical method has been developed to predict transonic linear cascade flows, with and without a tailboard, and quantify the nonperiodicity in the discharge. This method includes a new computational boundary condition to model the effects of the tailboard slots on the cascade interior flow. This method has been applied to a six-blade turbine nozzle cascade, transonically tested at the University of Leicester. The numerical results identified a specific slotted tailboard geometry, able to minimize the spurious reflected waves and regain some pitchwise flow periodicity. The wind tunnel open jet test section was redesigned accordingly. Pressure measurements at the cascade outlet and synchronous spark schlieren visualization of the test section, with and without the optimized slotted tailboard, have confirmed the gain in pitchwise periodicity predicted by the numerical model. Copyright © 2006 by ASME.

The sustainability and assessment of drystone retaining walls

The art of drystone walling is a highly sustainable traditional practice which uses local materials and craftsmen. As no
mortar is used they have low embodied carbon, and much repair work or rebuilding can be carried out using very little if any new
materials. However local practices developed to suit local materials, leading to a range of construction styles, making them difficult to
assess. This paper examines a range of construction styles of drystone retaining walls in use across the United Kingdom.
Understanding of the substantial variations of construction style is essential to enable proper assessment of these structures. Different
frictional and weathering characteristics, and the naturally occurring shapes of stone found in an area, all affect the ways in which the
stones have traditionally been assembled into walls. Ease of construction also plays a part, as the craftsman will naturally wish to
achieve a robust construction in a way that is economical of time and effort. Aesthetics may be very important, for both client and
craftsman. It is also shown that construction style is influenced by the location and function of the structures, with harbour walls<br/>particularly likely to have unique characteristics, and the reasons for this are explored.

Offenders' Risk-Taking Attitude Inside and Outside the Prison Walls

It has long been assumed that risk taking is closely associated with criminal behavior. One reason for placing criminals behind bars-aside from punishment and protecting the public-is to prevent them from engaging in further risky criminal activities. Limited attention has been paid to whether being inside or outside prison affects offenders' risk-taking behaviors and attitudes. We compared risk-taking behaviors and attitudes in five risk domains (ethical, financial, health/safety, recreational, social) among 75 incarcerated offenders (i.e., offenders who are currently in prison) and 45 ex-offenders (i.e., offenders who have just been released from prison). Ex-offenders reported higher likelihood of engaging in risky behavior, driven largely by a willingness to take more risks in the recreational and ethical domains. Benefits attributed to risk taking as well as risk perception did not differ between incarcerated and ex-offenders, indicating that the opportunity to take risks might underlie behavioral risk intentions. Our results also indicate that risk-taking activities are better predicted by the expected benefits rather than by risk perception, aside from the health/safety domain. These results highlight the importance of studying the person and the environment and examining risk taking in a number of content domains.

Search protocols for hidden forensic objects beneath floors and within walls

The burial of objects (human remains, explosives, weapons) below or behind concrete, brick, plaster or tiling may be associated with serious crime and are difficult locations to search. These are quite common forensic search scenarios but little has been published on them to-date. Most documented discoveries are accidental or from suspect/witness testimony. The problem in locating such hidden objects means a random or chance-based approach is not advisable. A preliminary strategy is presented here, based on previous studies, augmented by primary research where new technology or applications are required. This blend allows a rudimentary search workflow, from remote desktop study, to non-destructive investigation through to recommendations as to how the above may inform excavation, demonstrated here with a case study from a homicide investigation. Published case studies on the search for human remains demonstrate the problems encountered when trying to find and recover sealed-in and sealed over locations. Established methods include desktop study, photography, geophysics and search dogs:these are integrated with new technology (LiDAR and laser scanning; photographic rectification; close quarter aerial imagery; ground-penetrating radar on walls and gamma-ray/neutron activation radiography) to propose this possible search strategy.

Sequential injection of domain walls into ferroelectrics at different bias voltages: Paving the way for “domain wall memristors”

Simple meso-scale capacitor structures have been made by incorporating thin (300 nm) single crystal lamellae of KTiOPO4 (KTP) between two coplanar Pt electrodes. The influence that either patterned protrusions in the electrodes or focused ion beam milled holes in the KTP have on the nucleation of reverse domains during switching was mapped using piezoresponse force microscopy imaging. The objective was to assess whether or not variations in the magnitude of field enhancement at localised “hot-spots,” caused by such patterning, could be used to both control the exact locations and bias voltages at which nucleation events occurred. It was found that both the patterning of electrodes and the milling of various hole geometries into the KTP could allow controlled sequential injection of domain wall pairs at different bias voltages; this capability could have implications for the design and operation of domain wall electronic devices, such as memristors, in the future.

Local conductance: A means to extract polarization and depolarizing fields near domain walls in ferroelectrics

Conducting atomic force microscopy images of bulk semiconducting BaTiO3 surfaces show clear stripe domain contrast. High local conductance correlates with strong out-of-plane polarization (mapped independently using piezoresponse force microscopy), and current- voltage characteristics are consistent with dipole-induced alterations in Schottky barriers at the metallic tip-ferroelectric interface. Indeed, analyzing current-voltage data in terms of established Schottky barrier models allows relative variations in the surface polarization, and hence the local domain structure, to be determined. Fitting also reveals the signature of surface-related depolarizing fields concentrated near domain walls. Domain information obtained from mapping local conductance appears to be more surface-sensitive than that from piezoresponse force microscopy. In the right materials systems, local current mapping could therefore represent a useful complementary technique for evaluating polarization and local electric fields with nanoscale resolution.

Experimental investigation of thermal inertia properties in hemp-lime concrete walls

Hemp-lime concrete is a sustainable alternative to standard building wall materials, with low associated embodied energy. It exhibits good hygric, acoustic and thermal properties, making it an exciting, sustainable building envelope material. When cast in temporary shuttering around a timber frame, it exhibits lower thermal conductivity than concrete, and consequently achieves low U-values in a primarily mono-material wall construction. Although cast relatively thick hemp-lime walls do not generally achieve the low U-values stipulated in building regulations. However assessment of its thermal performance through evaluation of its resistance to thermal transfer alone, underestimates its true thermal quality. The thermal inertia, or reluctance of the wall to change its temperature when exposed to changing environmental temperatures, also has a significant impact on the thermal quality of the wall, the thermal comfort of the interior space and energy consumption due to space heating. With a focus on energy reduction in buildings, regulations emphasise thermal resistance to heat transfer with only less focus on thermal inertia or storage benefits due to thermal mass. This paper investigates dynamic thermal responsiveness in hemp-lime concrete walls. It reports the influence of thermal conductivity, density and specific heat through analysis of steady state and transient heat transfer, in the walls. A novel hot-box design which isolates the conductive heat flow is used, and compared with tests in standard hot-boxes. Thermal diffusivity and effusivity are evaluated, using experimentally measured conductivity, based on analytical relationships. Experimental results evident that hemp-lime exhibits high thermal inertia. They show the thermal inertia characteristics compensate for any limitations in the thermal resistance of the construction material. When viewed together the thermal resistance and mass characteristics of hemp-lime are appropriate to maintain comfortable thermal indoor conditions and low energy operation.

Residential segregation, dividing walls and mental health: A population-based record linkage study

Background
Neighbourhood segregation has been described as a fundamental determinant of physical health, but literature on its effect on mental health is less clear. Whilst most previous research has relied on conceptualized measures of segregation, Northern Ireland is unique as it contains physical manifestations of segregation in the form of segregation barriers (or “peacelines”) which can be used to accurately identify residential segregation.
Methods
We used population-wide health record data on over 1.3 million individuals, to analyse the effect of residential segregation, measured by both the formal Dissimilarity Index and by proximity to a segregation barrier, on the likelihood of poor mental health.
Results
Using multi-level logistic regression models we found residential segregation measured by the Dissimilarity Index poses no additional risk to the likelihood of poor mental health after adjustment for area-level deprivation. However, residence in an area segregated by a “peaceline” increases the likelihood of antidepressant medication by 19% (OR=1.19, 95% CI: 1.14, 1.23) and anxiolytic medication by 39% (OR=1.39, 95% CI: 1.32, 1.48), even after adjustment for gender, age, conurbation, deprivation and crime.
Conclusions
Living in an area segregated by a ‘peaceline’ is detrimental to mental health suggesting segregated areas characterised by a heightened sense of ‘other’ pose a greater risk to mental health. The difference in results based on segregation measure highlights the importance of choice of measure when studying segregation.

Bringing down the walls: Is the notion of ‘promoting shared space’ commensurate with effective transformation of contested places in Belfast?

This article is a reflexive and critical examination of recent empirical research on effective practice in the management and ‘transformation’ of contested urban space at sectarian interfaces in Belfast. By considering the development of interfaces, the areas around them and policy responses to their persistence, the reality of contested space in the context of ‘peace building’ is apparent; with implications for local government as central to the statutory response. Belfast has developed an inbuilt absence of connectivity; where freedom of movement is particularly restricted and separation of contested space is the policy default position. Empirical research findings focus attention on the significance of social and economic regeneration and fall into three specific areas that reflect both long-term concerns within neighbourhoods and the need for adequate policy responses and action ‘on the ground’. Drawing on Elden and Sassen we reconfigure the analytical framework by which interfaces are defined, with implications for policy and practice in post-conflict Belfast. Past and current policy for peace-building in Northern Ireland, and transforming the most contested space, at interfaces in Belfast, is deliberately ambiguous and offers little substance having failed to advance from funding-led linguistic compliance to a sustainable peace-building methodology.