Application to argon ions of a new technique to measure the two-electron contribution to the ground state energy of helium-like ions

We have measured the two-electron contribution of the ground state energy of helium-like argon ions using an electron beam ion trap (EBIT). A two-dimensional map was measured showing the intensity of x-rays from the trap passing through a krypton-filled absorption cell. The independent axes of this map were electron beam energy and x-ray energy. From this map, we deduced the two-electron contribution of the ground state of helium-like argon. This experimentally determined Value (312.4 +/- 9.5 eV) was found to be in good agreement with our calculated values (about 303.35 eV) and previous calculations of the same quantity. Based on these measurements, we have shown that a ten-day absorption spectroscopy run with a super-EBIT should be sufficient to provide a new benchmark value for the two-electron contribution to the ground state of helium-like krypton. Such a measurement would then constitute a test of quantum electrodynamics to second order.

Solventless continuous flow homogeneous hydroformylation of 1-octene

The hydroformylation of 1-octene under continuous flow conditions is described. The system involves dissolving the catalyst, made in situ from [ Rh(acac)(CO)(2)] (acacH = 2,4- pentanedione) and [RMIM][TPPMS] ( RMIM = 1-propyl (Pr), 1-pentyl (Pn) or 1-octyl (O)-3-methyl imidazolium, TPPMS = Ph2P(3-C6H4SO3)), in a mixture of nonanal and 1-octene and passing the substrate, 1-octene, together with CO and H-2 through the system dissolved in supercritical CO2 (scCO(2)). [PrMIM][TPPMS] is poorly soluble in the medium so heavy rhodium leaching (as complexes not containing phosphine) occurs in the early part of the reaction. [PnMIM][ PPMS] affords good rates at relatively low catalyst loadings and relatively low overall pressure (125 bar) with rhodium losses <1 ppm, but the catalyst precipitates at higher catalyst loadings, leading to lower reaction rates. [OMIM][ TPPMS] is the most soluble ligand and promotes high reaction rates, although preliminary experiments suggested that rhodium leaching was high at 5-10 ppm. Optimisation aimed at balancing flows so that the level within the reactor remained constant involved a reactor set up based around a reactor fitted with a sight glass and sparging stirrer with the CO2 being fed by a cooled head HPLC pump, 1-octene by a standard HPLC pump and CO/H-2 through a mass flow controller. The pressure was controlled by a back pressure regulator. Using this set up, [OMIM][ TPPMS] as the ligand and a total pressure of 140 bar, it was possible to control the level within the reactor and obtain a turnover frequency of ca. 180 h(-1). Rhodium losses in the optimised system were 100 ppb. Transport studies showed that 1-octene is preferentially transported over the aldehydes at all pressures, although the difference in mol fraction in the mobile phase was less at lower pressures. Nonanal in the mobile phase suppresses the extraction of 1-octene to some extent, so it is better to operate at high conversion and low pressure to optimise the extraction of the products relative to the substrate. CO and H2 in the mobile phase also suppress the extraction effciency by as much as 80%.

Prediction of Fresh and Hardened Properties of Self-Consolidating Concrete Using Neurofuzzy Approach

Self-consolidating concrete (SCC) developed in Japan in the late 80s has enabled the construction industry to reduce demand on the resources, improve the work conditions and also reduce the impact on the environment by elimination of the need for compaction. This investigation aimed at exploring the potential use of the neurofuzzy (NF) approach to model the fresh and hardened properties of SCC containing pulverised fuel ash (PFA) as based on experimental data investigated in this paper. Twenty six mixes were made with water-to-binder ratio ranging from 0.38 to 0.72, cement content ranging from 183 to 317 kg/m3 , dosage of PFA ranging from 29 to 261 kg/m3 , and percentage of superplasticizer, by mass of powder, ranging from 0 to 1%. Nine properties of SCC mixes modeled by NF were the slump flow, JRing combined to the Orimet, JRing combined to cone, V-funnel, L-box blocking ratio, segregation ratio, and the compressive strength at 7, 28, and 90 days. These properties characterized the filling ability, the passing ability, the segregation resistance of fresh SCC, and the compressive strength. NF model is constructed by training and testing data using the experimental results obtained in this study. The results of NF models were compared with experimental results and were found to be quite accurate. The proposed NF models offers useful modeling approach of the fresh and hardened properties of SCC containing PFA.

Correlated electron-ion dynamics in metallic systems

In this paper we briefly discuss the problem of simulating non-adiabatic processes in systems that are usefully modelled using molecular dynamics. In particular we address the problems associated with metals, and describe two methods that can be applied: the Ehrenfest approximation and correlated electron-ion dynamics (CEID). The Ehrenfest approximation is used to successfully describe the friction force experienced by an energetic particle passing through a crystal, but is unable to describe the heating of a wire by an electric current. CEID restores the proper heating.

A “very limited” effect or a “seismic” impact? A study of the impact of the Human Rights Act 1998 on the Courts of Northern Ireland

This article focuses on the question of what impact the Human Rights Act 1998 has had in practice on the courts of Northern Ireland. How frequently are human rights arguments made in the course of cases in this jurisdiction, and to what extent do such arguments affect outcomes of cases? In order to assess the impact of the Act, the use of the European Convention on Human Rights in the Northern Irish courts during four periods of time is examined. These are, firstly, prior to the passing of the Act in November 1998; secondly, between the Act’s passing and its coming into force in October 2000; thirdly, the first three years after the coming into force of the Act (October 2000 until October 2003); and fourthly, the three years between October 2006 and October 2009.

Hybridization of a class of "second order" models of traffic flow

Despite the simultaneous progress of traffic modelling both on the macroscopic and microscopic front, recent works [E. Bourrel, J.B. Lessort, Mixing micro and macro representation of traffic flow: a hybrid model based on the LWR theory, Transport. Res. Rec. 1852 (2003) 193–200; D. Helbing, M. Treiber, Critical discussion of “synchronized flow”, Coop. Transport. Dyn. 1 (2002) 2.1–2.24; A. Hennecke, M. Treiber, D. Helbing, Macroscopic simulations of open systems and micro–macro link, in: D. Helbing, H.J. Herrmann, M. Schreckenberg, D.E. Wolf (Eds.), Traffic and Granular Flow ’99, Springer, Berlin, 2000, pp. 383–388] highlighted that one of the most promising way to simulate efficiently traffic flow on large road networks is a clever combination of both traffic representations: the hybrid modelling. Our focus in this paper is to propose two hybrid models for which the macroscopic (resp. mesoscopic) part is based on a class of second order model [A. Aw, M. Rascle, Resurection of second order models of traffic flow?, SIAM J. Appl. Math. 60 (2000) 916–938] whereas the microscopic part is a Follow-the Leader type model [D.C. Gazis, R. Herman, R.W. Rothery, Nonlinear follow-the-leader models of traffic flow, Oper. Res. 9 (1961) 545–567; R. Herman, I. Prigogine, Kinetic Theory of Vehicular Traffic, American Elsevier, New York, 1971]. For the first hybrid model, we define precisely the translation of boundary conditions at interfaces and for the second one we explain the synchronization processes. Furthermore, through some numerical simulations we show that the waves propagation is not disturbed and the mass is accurately conserved when passing from one traffic representation to another.

Cinema Lucida: Johan van der Keuken and the Meaning of Loss

Ever sceptical about the positivistic claims of ethnographic and so-called realist documentary, Johan van der Keuken’s film-making is the work of a curious, spontaneous and disorientated observer of the essential strangeness of both the foreign and the familiar, new landscapes and cities, experiences, and people. While there are various explicitly political and socially orientated films and themes across his work, it is those films and moments when what is being conveyed is a sense of him being somewhere liminal, being ‘in-between’ situations, cultures, styles and interpretations, reticent, uncertain but incorrigibly curious that constitute his most valuable contribution to documentary film aesthetics. Not surprisingly, such characteristics often come to the fore in those films where he tries to make sense of loss, the passing of lives and the legacies left behind. This article discusses questions of history and personal loss in a number of his films.

Mauve Stingers (Pelagia noctiluca) as carriers of the bacterial fish pathogen Tenacibaculum maritimum

Aggregations or blooms of jellyfish are increasingly problematic for the aquaculture industry. Jellyfishassociated mass mortalities of sea-caged fish are most often caused by swarms of oceanic species like Pelagia noctiluca. These relatively large jellyfish get carried by tides and currents onto fish cages, causing them to break up into pathogenic nematocyst-containing pieces that are capable of passing through the mesh of the cages. The main effect on fish is gill damage leading to respiratory distress, but the lesions may also be compounded by bacterial infection, Tenacibaculum maritimum being one of the pathogens involved. In our previous study, we highlighted the ability of the jellyfish Phialella quadrata to carry this important pathogen. However, since these small jellyfish were collected around sea-cages of infected salmon, it was not possible to determine if the jellyfish or the fish themselves were the original source of the bacteria. Results of the current study demonstrate that these filamentous bacteria are present on the mouth of P. noctiluca that had no previous contact with farmed fish. These new results highlight the fact that some Cnidarian species harbour T. maritimum and suggest that jellyfishmight be a natural host for these bacteria whose environmental reservoir has not yet been determined.

Understanding the Performance of Melt-Extruded Poly(ethylene oxide)–Bicalutamide Solid Dispersions: Characterisation of Microstructural Properties Using Thermal, Spectroscopic and Drug Release Methods

In this article, we have prepared hot-melt-extruded solid dispersions of bicalutamide (BL) using poly(ethylene oxide) (PEO) as a matrix platform. Prior to preparation, miscibility of PEO and BL was assessed using differential scanning calorimetry (DSC). The onset of BL melting was signi?cantly depressed in the presence of PEO, and using Flory– Huggins (FH) theory, we identi?ed a negative value of -3.4, con?rming miscibility. Additionally, using FH lattice theory, we estimated the Gibbs free energy of mixing which was shown to be negative, passing through a minimum at a polymer fraction of 0.55. Using these data, solid dispersions at drug-to-polymer ratios of 1:10, 2:10 and 3:10 were prepared via hot-melt extrusion. Using a combination of DSC, powder X-ray diffractometry and scanning electron
microscopy, amorphous dispersions of BL were con?rmed at the lower two drug loadings. At the 3:10 BL to PEO ratio, crystalline BL was detected. The percent crystallinity of PEO was reduced by approximately 10% in all formulations following extrusion. The increased amorphous content within PEO following extrusion accommodated amorphous BL at drug to polymer loadings up to 2:10; however, the increased amorphous domains with PEO following extrusion were not suf?cient to fully accommodate BL at drug-to-polymer ratios of 3:10.

Monitoring and repair of an impact damaged prestressed bridge

This paper details the monitoring and repair of an impact damaged prestressed concrete bridge. The repair was required following an impact from a low-loader carrying an excavator while passing underneath the bridge. The repair was carried out by preloading the bridge in the vicinity of the damage to relieve some prestressing. This preload was removed following the hardening and considerable strength gain of the repair material. The true behaviour of damaged prestressed concrete bridges during repair is difficult to estimate theoretically due to lack of benchmarking and inadequacy of assumed damage models. A network of strain gauges at locations of interest was thus installed during the entire period of repair. Effects of various activities were qualitatively and quantitatively observed. The interaction and rapid, model-free calibration of damaged and undamaged beams, including identification of damaged gauges were also probed. This full scale experiment is expected to be of interest and benefit to the practising engineer and the researcher alike.

Parish farms and the poor law: a response to unemployment in rural southern England, c.1815-1835

Finding a ‘solution’ for the seemingly intractable problem of unemployment in post-Napoleonic rural England was the Holy Grail for many vestries. Yet, whilst we know much about the depth and consequences of unemployment, parish-driven schemes to set the poor to work have been subjected to remarkably little in the way of systematic study. This paper focuses on one such policy that remains entirely obscure: parish farms, the hiring of pre-existing farms or fields by the parish on which to employ those out of work. Bearing a ‘family resemblance’ to allotments and other land-based attempts to alleviate poverty, parish farms were unique in that they were managed in all regards by the parish and were an employment strategy as opposed to a scheme to supplement the incomes of the poor. Whilst the archive of parish farms is often frustratingly opaque, it is shown that before they were effectively outlawed by the passing of the New Poor Law, many southern parishes, especially in the Weald of Kent and Sussex, adopted the scheme, occasionally with great success.

The level playing field: the impact of assessment practice on professional development

Context: The effects of assessment practice on students’ learning are unclear, particularly regarding professional development. Corralling in objective structured clinical examinations (OSCEs) is designed to reduce illicit passing of examination information. Candidates completing an examination are kept secluded until the next cohort of examinees has begun. We used the introduction of corralling as a context in which to explore social influences on examination misconduct, with the aims of improving understanding of the hidden effects of assessment, and evaluating the acceptability of corralling from the student perspective.

Methods: A questionnaire was administered to students corralled post-OSCE for the first time. Eleven semi-structured interviews were subsequently conducted. Questionnaire data were analysed for descriptive statistics and thematic analysis of interview transcripts was carried out.

Results: The questionnaire response rate was 95.4% (251/263). Before corralling, 80.9% (203/251) of students were aware of the sharing of information among peers and 78.5% (197/251) agreed that such misconduct was unprofessional. The majority were in favour of corralling (90.8%, 228/251). Four themes emerged from the semi-structured interviews: the student network versus the individual; assessment-driven culture; the deferring of professionalism, and the ‘level playing field’. Students saw interaction within the student network, on a background of assessment-driven culture, as the key driver in examination misconduct. Conforming to the rules of the social network was prioritised over individual agency, although the mismatch between the rules of the network and the dominant professional discourse caused some conflict for individuals. Deferred professionalism (described as the practice of taking on the norms of professional behaviour only when qualified) was a rationalisation used to minimise this conflict. Corralling provided a ‘level playing field’ in which the influences of the network were minimised.

Conclusions: Examination misconduct is thus a complex social construction with implications for individual learners in terms of professional development. Corralling is one mechanism for addressing misconduct that is acceptable to students, but assessment processes have important hidden effects which educators should acknowledge.

Echoes from the Past: Intergenerational Memories in Cyprus

The purpose of this article is to describe young people's awareness of their parents’ and grandparents’ stories of the events of 1974 in Cyprus and to evaluate the extent to which they perceive teachers as other key figures in their lives endorsing family accounts of history. The article is based on focus group discussions with 20 Turkish Cypriot and 20 Greek Cypriot teenagers from two schools in Cyprus. The article describes how in some cases, young people appropriate these memories as their own, while in other cases, they acknowledge how the passing of time dilutes the significance of past events and allows some young people to envisage a different collective future.

A Physically-Constrained Source Model For FDTD Acoustic Simulation

The Finite Difference Time Domain (FDTD) method is becoming increasingly popular for room acoustics simulation. Yet, the literature on grid excitation methods is relatively sparse, and source functions are traditionally implemented in a hard or additive form
using arbitrarily-shaped functions which do not necessarily obey the physical laws of sound generation. In this paper we formulate
a source function based on a small pulsating sphere model. A physically plausible method to inject a source signal into the grid
is derived from first principles, resulting in a source with a near-flat spectrum that does not scatter incoming waves. In the final
discrete-time formulation, the source signal is the result of passing a Gaussian pulse through a digital filter simulating the dynamics of the pulsating sphere, hence facilitating a physically correct means to design source functions that generate a prescribed sound field.

Formal Analysis of MPI-based Parallel Programs

Most parallel computing applications in highperformance computing use the Message Passing Interface (MPI) API. Given the fundamental importance of parallel computing to science and engineering research, application correctness is paramount. MPI was originally developed around 1993 by the MPI Forum, a group of vendors, parallel programming researchers, and computational scientists. However, the document defining the standard is not issued by an official standards organization but has become a de facto standard © 2011 ACM.