Parenting practices in Northern Ireland: evidence from the Northern Ireland Household Panel Survey

The impact of parental child-rearing practices on child outcomes has been the subject of much research and debate for many years. Studies carried out within a variety of disciplines and across a number of different countries in the world have indicated that parents tend to use a different pattern of rearing their sons than their daughters, and that child-rearing practices are related to the gender of the parent, as well as to the age and developmental stage of the child. However, there has been little research in Northern Ireland on child-rearing behaviours. In order to address this shortfall, this paper presents an analysis of parents’ perceptions of their interactions with their children. Data from Wave 3 of the Northern Ireland Household Panel Survey were analysed to explore aspects of ‘‘negative’’ parenting practices (arguing, yelling and use of physical punishment) as well as ‘‘positive’’ parenting practices (talking, praising and hugging). The participants were all parents (aged 16 years and over) with children under the age of 16 years living in the same household. Each parent reported his/her interaction with each child (up to a maximum of six children), and in total 1,629 responses were recorded. The results of the research supported previous findings from the United Kingdom and elsewhere, and indicated that the parenting styles of respondents in Northern Ireland were indeed related to the gender and age of the children and to the gender of the parents. The survey found that parents in Northern Ireland tend to have a harsher, more negative style of parenting boys than girls and that children in their teenage years have fewer positive interactions with their parents than younger children. The same parents and children will be followed up in 2007 in order to provide a longitudinal analysis of parent/child relationships in Northern Ireland.

Improved Equivalent Frame Analysis Method for Flat Plate Structures in Vicinity of Edge Columns

This paper proposes a modification to the ACI 318-02 equivalent frame method of analysis of reinforced concrete flat plate exterior panels. Two existing code methods were examined: ACI 318 and BS 8110. The derivation of the torsional stiffness of the edge strip as proposed by ACI 318 is examined and a more accurate estimate of this value is proposed, based on both theoretical analysis and experimental results. A series of 1/3-scale models of flat plate exterior panels have been tested. Unique experimental results were obtained by measuring strains in reinforcing bars at approximately 200 selected locations in the plate panel throughout the entire loading history. The measured strains were used to calculate curvature and, hence, bending moments; these were used along with moments in the columns to assess the accuracy of the equivalent frame methods. The proposed method leads to a more accurate prediction of the moments in the plate at the column front face, at the panel midspan, and in the edge column. Registered Subscribers: View the full article. This document is available as a free download to qualified members. An electronic (PDF) version is available for purchase and download. Click on the Order Now button to continue with the download.

The Characterization of Friction Stir Welding Process Effects on Stiffened Panel Buckling Performance

The introduction of advanced welding methods as an alternative joining process to riveting in the manufacture of primary aircraft structure has the potential to realize reductions in both manufacturing costs and structural weight. However, welding processes can introduce undesirable residual stresses and distortions in the final fabricated components, as well as localized loss of mechanical properties at the weld joints. The aim of this research is to determine and characterize the key process effects of advanced welding assembly methods on stiffened panel static strength performance. This in-depth understanding of the relationships between welding process effects and buckling and collapse strength is required to achieve manufacturing cost reductions without introducing structural analysis uncertainties and hence conservative over designed welded panels. This current work is focused at the sub-component level and examines the static strength of friction stir welded multi stiffener panels. The undertaken experimental and computational studies have demonstrated that local skin buckling is predominantly influenced by the magnitude of welding induced residual stresses and associated geometric distortions, whereas panel collapse behavior is sensitive to the lateral width of the physically joined skin and stiffener flange material, the strength of material in the Heat Affected Zone as well as the magnitude of the welding induced residual stresses. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.


--------------------------------------------------------------------------------

Reaxys Database Information
|

Intelligent Assembly Time Analysis Using a Digital Knowledge-Based Approach

The implementation of effective time analysis methods fast and accurately in the era of digital manufacturing has become a significant challenge for aerospace manufacturers hoping to build and maintain a competitive advantage. This paper proposes a structure oriented, knowledge-based approach for intelligent time analysis of aircraft assembly processes within a digital manufacturing framework. A knowledge system is developed so that the design knowledge can be intelligently retrieved for implementing assembly time analysis automatically. A time estimation method based on MOST, is reviewed and employed. Knowledge capture, transfer and storage within the digital manufacturing environment are extensively discussed. Configured plantypes, GUIs and functional modules are designed and developed for the automated time analysis. An exemplar study using an aircraft panel assembly from a regional jet is also presented. Although the method currently focuses on aircraft assembly, it can also be well utilized in other industry sectors, such as transportation, automobile and shipbuilding. The main contribution of the work is to present a methodology that facilitates the integration of time analysis with design and manufacturing using a digital manufacturing platform solution.

Stratification and Monitoring of Juvenile Idiopathic Arthritis Patients by Synovial Proteome Analysis

Juvenile idiopathic arthritis (JIA) comprises a poorly understood group of chronic, childhood onset, autoimmune diseases with variable clinical outcomes. We investigated whether profiling of the synovial fluid (SF) proteome by a fluorescent dye based, two-dimensional gel (DIGE) approach could distinguish patients in whom inflammation extends to affect a large number of joints, early in the disease process. SF samples from 22 JIA patients were analyzed: 10 with oligoarticular arthritis, 5 extended oligoarticular and 7 polyarticular disease. SF samples were labeled with Cy dyes and separated by two-dimensional electrophoresis. Multivariate analyses were used to isolate a panel of proteins which distinguish patient subgroups. Proteins were identified using MALDI-TOF mass spectrometry with expression further verified by Western immunoblotting and immunohistochemistry. Hierarchical clustering based on the expression levels of a set of 40 proteins segregated the extended oligoarticular from the oligoarticular patients (p <0.05). Expression patterns of the isolated protein panel have also been observed over time, as disease spreads to multiple joints. The data indicates that synovial fluid proteome profiles could be used to stratify patients based on risk of disease extension. These protein profiles may also assist in monitoring therapeutic responses over time and help predict joint damage. © 2009 American Chemical Society.

Non-Prismatic Sub-Stiffening for Stiffened Panel Plates — Stability Behaviour and Performance Gains

Previous work has demonstrated the potential to introduce plate element sub-stiffening to increase the local stability and thus static strength performance of integrally machined aluminium alloy stiffened panels. The introduction of plate element prismatic sub-stiffening modifies local plate buckling behaviour and within realistic design constraints, may produce sizable performance gains with equivalent mass designs. This article examines through experimental and computational analysis the potential of non-prismatic sub-stiffening for tailoring local plate stability performance. Using non-prismatic sub-stiffening, the experimental work demonstrates potential initial buckling performance gains with equivalent mass designs (+185%), and computationally, potential mass savings with equivalent static strength performance designs (-9.4%). (C) 2010 Elsevier Ltd. All rights reserved.

The demand for labor: An analysis using matched employer-employee data from the German LIAB. Will the high unskilled worker own-wage elasticity please stand up?

This paper uses matched employee-employer LIAB data to provide panel estimates of the structure of labor demand in western Germany, 1993-2002, distinguishing between highly skilled, skilled, and unskilled labor and between the manufacturing and service sectors. Reflecting current preoccupations, our demand analysis seeks also to accommodate the impact of technology and trade in addition to wages. The bottom-line interests are to provide elasticities of the demand for unskilled (and other) labor that should assist in short-run policy design and to identify the extent of skill biases or otherwise in trade and technology.

Aerospace Stiffened Panel Initial Sizing With Novel Skin Sub-Stiffening Features

The introduction of skin sub-stiffening features has the potential to modify the local stability and fatigue crack growth performance of stiffened panels. Proposed herein is a method to enable initial static strength sizing of panels with such skin sub-stiffening features. The method uses bespoke skin buckling coefficients, automatically generated by Finite Element analysis and thus limits the modification to the conventional aerospace panel initial sizing process. The approach is demonstrated herein and validated for prismatic sub-stiffening features. Moreover, examination of the generated buckling coefficient data illustrates the influence of skin sub-stiffening on buckling behavior, with static strength increases typically corresponding to a reduction in the number of initial skin longitudinal buckle half-waves.

Numerical and Experimental Investigation of Aircraft Panel Deformations During Riveting Process

In collaboration with Airbus-UK, the dimensional growth of aircraft panels while being riveted with stiffeners is investigated. Small panels are used in this investigation. The stiffeners have been fastened to the panels with rivets and it has been observed that during this operation the panels expand in the longitudinal and transverse directions. It has been observed that the growth is variable and the challenge is to control the riveting process to minimize this variability. In this investigation, the assembly of the small panels and longitudinal stiffeners has been simulated using static stress and nonlinear explicit finite element models. The models have been validated against a limited set of experimental measurements; it was found that more accurate predictions of the riveting process are achieved using explicit finite element models. Yet, the static stress finite element model is more time efficient, and more practical to simulate hundreds of rivets and the stochastic nature of the process. Furthermore, through a series of numerical simulations and probabilistic analyses, the manufacturing process control parameters that influence panel growth have been identified. Alternative fastening approaches were examined and it was found that dimensional growth can be controlled by changing the design of the dies used for forming the rivets.

Population-based study reveals new risk-stratification biomarker panel for Barrett's esophagus

BACKGROUND & AIMS: The risk of progression of Barrett's esophagus (BE) to esophageal adenocarcinoma (EAC) is low and difficult to calculate. Accurate tools to determine risk are needed to optimize surveillance and intervention. We assessed the ability of candidate biomarkers to predict which cases of BE will progress to EAC or high-grade dysplasia and identified those that can be measured in formalin-fixed tissues. METHODS: We analyzed data from a nested case-control study performed using the population-based Northern Ireland BE Register (1993-2005). Cases who progressed to EAC (n = 89) or high-grade dysplasia =6 months after diagnosis with BE were matched to controls (nonprogressors, n = 291), for age, sex, and year of BE diagnosis. Established biomarkers (abnormal DNA content, p53, and cyclin A expression) and new biomarkers (levels of sialyl Lewis(a), Lewis(x), and Aspergillus oryzae lectin [AOL] and binding of wheat germ agglutinin) were assessed in paraffin-embedded tissue samples from patients with a first diagnosis of BE. Conditional logistic regression analysis was applied to assess odds of progression for patients with dysplastic and nondysplastic BE, based on biomarker status. RESULTS: Low-grade dysplasia and all biomarkers tested, other than Lewis(x), were associated with risk of EAC or high-grade dysplasia. In backward selection, a panel comprising low-grade dysplasia, abnormal DNA ploidy, and AOL most accurately identified progressors and nonprogressors. The adjusted odds ratio for progression of patients with BE with low-grade dysplasia was 3.74 (95% confidence interval, 2.43-5.79) for each additional biomarker and the risk increased by 2.99 for each additional factor (95% confidence interval, 1.72-5.20) in patients without dysplasia. CONCLUSIONS: Low-grade dysplasia, abnormal DNA ploidy, and AOL can be used to identify patients with BE most likely to develop EAC or high-grade dysplasia.

Antimicrobic susceptibility and plasmid profile analysis as identity tests for multiple blood isolates of coagulase-negative staphylococci

We compared a disk diffusion antimicrobic susceptibility panel with plasmid DNA profiles as tests for identity of 106 isolates of coagulase-negative staphylococci cultured from the blood of 45 patients on multiple occasions. The antimicrobic panel included penicillin, oxacillin, clindamycin, trimethoprim-sulfamethoxazole, chloramphenicol, tetracycline, tobramycin, kanamycin, and gentamicin. Nineteen patterns of antimicrobic susceptibility were found. The most common pattern was present in 25% of the isolates, and at least one isolate from 31% of the patients had this pattern. Forty-seven distinct plasmid DNA profiles were found. The most common plasmid profile was present in 8.5% of the isolates, and at least one isolate from 15% of the patients had this profile. Twenty-eight patients had multiple isolates that were identical by plasmid profile analysis. Twenty-seven (96%) of these patients had isolates that were also identical by antimicrobic susceptibility. Nineteen patients had multiple isolates that were different by plasmid profile analysis. In 18 (95%) of these patients, the isolates were also different by antimicrobic susceptibility. Although plasmid DNA profile analysis is a more discriminating tool, these data confirm that a selected disk diffusion antimicrobic susceptibility panel may be used to screen multiple blood isolates of coagulase-negative staphylococci for identity or differences.

Social Class Variation in Risk: A Comparative Analysis of the Dynamics of Economic Vulnerability

A joint concern with multidimensionality and dynamics is a defining feature of the pervasive use of the terminology of social exclusion in the European Union. The notion of social exclusion focuses attention on economic vulnerability in the sense of exposure to risk and uncertainty. Sociological concern with these issues has been associated with the thesis that risk and uncertainty have become more pervasive and extend substantially beyond the working class. This paper combines features of recent approaches to statistical modelling of poverty dynamics and multidimensional deprivation in order to develop our understanding of the dynamics of economic vulnerability. An analysis involving nine countries and covering the first five waves of the European Community Household Panel shows that, across nations and time, it is possible to identify an economically vulnerable class. This class is characterized by heightened risk of falling below a critical resource level, exposure to material deprivation and experience of subjective economic stress. Cross-national differentials in persistence of vulnerability are wider than in the case of income poverty and less affected by measurement error. Economic vulnerability profiles vary across welfare regimes in a manner broadly consistent with our expectations. Variation in the impact of social class within and across countries provides no support for the argument that its role in structuring such risk has become much less important. Our findings suggest that it is possible to accept the importance of the emergence of new forms of social risk and acknowledge the significance of efforts to develop welfare states policies involving a shift of opportunities and decision making on to individuals without accepting the 'death of social class' thesis.

Predicting low-velocity impact damage on a stiffened composite panel

An intralaminar damage model, based on a continuum damage mechanics approach, is presented to model the damage mechanisms occurring in carbon fibre composite structures incorporating fibre tensile and compressive breakage, matrix tensile and compressive fracture, and shear failure. The damage model, together with interface elements for capturing interlaminar failure, is implemented in a finite element package and used in a detailed finite element model to simulate the response of a stiffened composite panel to low-velocity impact. Contact algorithms and friction between delaminated plies were included, to better simulate the impact event. Analyses were executed on a high performance computer (HPC) cluster to reduce the actual time required for this detailed numerical analysis. Numerical results relating to the various observed interlaminar damage mechanisms, delamination initiation and propagation, as well as the model’s ability to capture post-impact permanent indentation in the panel are discussed. Very good agreement was achieved with experimentally obtained data of energy absorbed and impactor force versus time. The extent of damage predicted around the impact site also corresponded well with the damage detected by non destructive evaluation of the tested panel.

Vulnerability and multiple deprivation perspectives on economic exclusion in Europe: A latent class analysis

In this paper we address issues relating to vulnerability to economic exclusion and levels of economic exclusion in Europe. We do so by applying latent class models to data from the European Community Household Panel for thirteen countries. This approach allows us to distinguish between vulnerability to economic exclusion and exposure to multiple deprivation at a particular point in time. The results of our analysis confirm that in every country it is possible to distinguish between a vulnerable and a non-vulnerable class. Association between income poverty, life-style deprivation and subjective economic strain is accounted for by allocating individuals to the categories of this latent variable. The size of the vulnerable class varies across countries in line with expectations derived from welfare regime theory. Between class differentiation is weakest in social democratic regimes but otherwise the pattern of differentiation is remarkably similar. The key discriminatory factor is life-style deprivation, followed by income and economic strain. Social class and employment status are powerful predictors of latent class membership in all countries but the strength of these relationships varies across welfare regimes. Individual biography and life events are also related to vulnerability to economic exclusion. However, there is no evidence that they account for any significant part of the socio-economic structuring of vulnerability and no support is found for the hypothesis that social exclusion has come to transcend class boundaries and become a matter of individual biography. However, the extent of socio-economic structuring does vary substantially across welfare regimes. Levels of economic exclusion, in the sense of current exposure to multiple deprivation, also vary systematically by welfare regime and social class. Taking both vulnerability to economic exclusion and levels of exclusion into account suggests that care should be exercised in moving from evidence on the dynamic nature of poverty and economic exclusion to arguments relating to the superiority of selective over universal social policies.

Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression

The postbuckling behaviour of a panel with blade-stiffeners incorporating tapered flanges was experimentally investigated. A new failure mechanism was identified for this particular type of stiffener. Failure was initiated by mid-plane delamination at the free edge of the postbuckled stiffener web at a node-line. This was consistent with an interlaminar shear stress failure and was calculated from strain gauge measurements using an approximate analysis based on lamination theory and incorporating edge effects. The critical shear stress was found to agree well with the shear strength obtained from a three-point bending test of the web laminate.