Genome Sequence of Klebsiella pneumoniae Ecl8, a Reference Strain for Targeted Genetic Manipulation

We report the genome sequence of Klebsiella pneumoniae subsp. pneumoniae Ecl8, a spontaneous streptomycin-resistant mutant of strain ECL4, derived from NCIB 418. K. pneumoniae Ecl8 has been shown to be genetically tractable for targeted gene deletion strategies and so provides a platform for in-depth analyses of this species.

A markerless deletion method for genetic manipulation of Burkholderia cenocepacia and other multidrug-resistant gram-negative bacteria

Genetic manipulation of multidrug-resistant bacteria is often difficult and hinders progress in understanding their physiology and pathogenesis. This book chapter highlights advances in genetic manipulation of Burkholderia cenocepacia, which are also applicable to other members of the Burkholderia cepacia complex and multidrug-resistant gram-negative bacteria of other genera. The method detailed here is based on the I-SceI homing endonuclease system, which can be efficiently used for chromosomal integration, deletion, and genetic replacement. This system creates markerless mutations and insertions without leaving a genetic scar and thus can be reused successively to generate multiple modifications in the same strain.

Manipulation of intracellular glycerol and erythritol enhances germination of conidia at low water availability

The insect pathogen Beauveria bassiana, Metarhizium anisopliae and Paecilomyces farinosos can be effective biocontrol agents when relative humidity (RH) is close to 100%. At reduced water availability, germination of propagules, and therefore host infection, cannot occur. Cultures of B. bassiana, M. anisopliae and P. farinosus were grown under different conditions to obtain conidia with a modified polyol and trehalose content. Conidia with higher intracellular concentrations of glycerol and erythritol germinated both more quickly and at lower water activity (a(w)) than those from other treatments. In contrast, conidia containing up to 235.7 mg trehalose g-1 germinated significantly (P < 0 05) more slowly than those with an equivalent polyol content but less trehalose, regardless of water availability. Conidia from control treatments did not germinate below 0.951 - 0.935 a(w) (≡ 95.1 - 93.5% RH). In contrast, conidia containing up to 164.6 mg glycerol plus erythritol g-1 germinated down to 0.887 a(w) (≡ 88.7% RH). These conidia germinated below the water availability at which mycelial growth ceases (0.930 - 0.920 a(w)). Germ tube extension rates reflected the percentage germination of conidia, so the most rapid germ tube growth occurred after treatments which produced conidia containing the most glycerol and erythritol. This study shows for the first time that manipulating polyol content can extend the range of water availability over which fungal propagules can germinate. Physiological manipulation of conidia may improve biological control of insect pests in the field.

A descriptive study of the usage of spinal manipulative therapy techniques within a randomised clinical trial in acute low back pain

The majority of randomized clinical trials (RCTs) of spinal manipulative therapy have not adequately de?ned the terms ‘mobilization’ and ‘manipulation’, nor distinguished between these terms in reporting the trial interventions. The purpose of this study was to describe the spinal manipulative therapy techniques utilized within a RCT of manipulative therapy (MT; n=80), interferential therapy (IFT; n=80), and a combination of both (CT; n=80) for people with acute low back pain (LBP). Spinal manipulative therapy was de?ned as any ‘mobilization’ (low velocity manual force without a thrust) or ‘manipulation’ (high velocity
thrust) techniques of the spine described by Maitland and Cyriax.
The 16 physiotherapists, all members of the Society of Orthopaedic Medicine, utilized three spinal manipulative therapy patterns in the RCT: Maitland Mobilization (40.4%, n=59), Maitland Mobilization/Cyriax Manipulation (40.4%, n=59) and Cyriax Manipulation (19.1%, n=28). There was a signi?cant difference between the MT and CT groups in their usage of spinal manipulative therapy techniques (w2=9.178; df=2;P=0.01); subjects randomized to the CT group received three times more Cyriax Manipulation (29.2%, n=21/72) than those randomized to the MT group (9.5%, n=7/74; df=1; P=0.003).
The use of mobilization techniques within the trial was comparable with their usage by the general population of physiotherapists in Britain and Ireland for LBP management. However, the usage of manipulation techniques was considerably higher than reported in physiotherapy surveys and may re?ect the postgraduate training of trial therapists.

Poly(epsilon-caprolactone) and poly(epsilon-caprolactone)-polyvinylpyrrolidone-iodine blends as ureteral biomaterials: characterisation of mechanical and surface properties, degradation and resistance to encrustation in vitro.

This study describes the physicochemical properties and in vitro resistance to encrustation of solvent cast films composed of either poly(epsilon-caprolactone) (PCL), prepared using different ratios of high (50,000) to low (4000) (molecular weight) m.wt., or blends of PCL and the polymeric antimicrobial complex, poly(vinylpyrrolidone)-iodine (PVP-I). The incorporation of PVP-I offered antimicrobial activity to the biomaterials. Films were characterised in terms of mechanical (tensile analysis, dynamic mechanical thermal analysis) and surface properties (dynamic contact angle analysis, scanning electron microscopy), whereas degradation (at 37degreesC in PBS at pH 7.4) was determined gravimetrically. The resistance of the films to encrustation was evaluated using an in vitro encrustation model. Reductions in the ratio of high:low-m.wt. PCL significantly reduced the ultimate tensile strength, % elongation at break and the advancing contact angle of the films. These effects were attributed to alterations in the amorphous content and the more hydrophilic nature of the films. Conversely, there were no alterations in Young's modulus, the viscoelastic properties and glass-transition temperature. Incorporation of PVP-I did not affect the mechanical or rheological properties of the films, indicative of a limited interaction between the two polymers in the solid state. Manipulation of the high:low m.wt. ratio of PCL significantly altered the degradation of the films, most notably following longer immersion periods, and resistance to encrustation. Accordingly, maximum degradation and resistance to encrustation was observed with the biomaterial composed of 40:60 high:low m.wt. ratios of PCL; however, the mechanical properties of this system were considered inappropriate for clinical application. Films composed of either 50:50 or 60:40 ratio of high:low m.wt. PCL offered an appropriate compromise between physicochemical properties and resistance to encrustation. This study has highlighted the important usefulness of degradable polymer systems as ureteral biomaterials

Nitric oxide-A novel therapeutic for cancer.

Much research over the past two decades has focussed on understanding the complex interactions of nitric oxide (NO()) in both physiological and pathological processes. As with many other aspects of NO() biology, its precise role in tumour pathophysiology has been the cause of intense debate and we now know that it participates in numerous signalling pathways that are crucial to the malignant character of cancer. The available experimental evidence highlights contrasting pro- and anti-tumour effects of NO() expression, which appear to be reconciled by consideration of the concentrations involved. This review addresses the complexities of the role of NO() in cancer, whilst evaluating various experimental approaches to NO()-based cancer therapies, including both inhibition of nitric oxide synthases, and overexpression of NO() using donor drugs or nitric oxide synthase gene transfer. The evidence provided strongly supports a role for manipulation of tumour NO() either as a stand-alone therapy or in combination with conventional treatments to achieve a significant therapeutic gain.

Honest and dishonest displays, motivational state and subsequent decisions in hermit crab shell fights

Animal fights are typically preceded by displays and there is debate whether these are always honest. We investigated the prefight period in hermit crabs, Pagurus bernhardus, during which up to four types of display plus other activities that might provide information are performed. We determined how each display influences or predicts various fight decisions, and related these displays to the motivational state of the attacker, as determined by a startle response, and of the motivational state of the defender, as determined by the duration for which it resisted eviction from its shell. Two displays appeared to have consistent but different effects. Cheliped presentation, where the claws were held in a stationary position, often by both crabs but for longer by the larger, seemed to be honest, and allowed for mutual size assessment. This display enhanced the motivation and the success of the larger crab. In contrast, cheliped extension, involving the rapid thrust of the open chelae towards the opponent, did not seem to allow for mutual size assessment and may contain an element of bluff. It was performed more by the smaller crab and enhanced its success. The complexity of displays in this species appears to allow for both honesty and manipulation.

Size-assortative pairing in Gammarus pulex (Crustacea : Amphipoda): a test of the timing hypothesis

We present the first empirical test of the timing hypothesis regarding the generation of size-assortative pairing in amphipods. The timing hypothesis proposes that, since large males are better able to afford the costs of mate guarding than small males, the former can take larger females into precopula earlier in the female moult cycle than is feasible for the latter. This leaves small males to form pairs with smaller females closer to moult, thus generating size assortment. We presented male Gammarus pulex, collected both in precopula and as singletons, with females that were (1) previously guarded and therefore near to copulatory moult and (2) previously unguarded and therefore far from copulatory moult. This comparison tested the prediction of the timing hypothesis, that size assortment should break down when the opportunity for time-based male decisions is removed, but that size assortment should occur where timing is not disrupted. Counter to the hypothesis, we found that size assortment did not break down upon removal of the time factor. Large males tended to initiate mate guarding earlier than small males in both female moult groups. However, only in the previously unguarded group did large males guard for longer than small males. This result suggests that, although size assortment occurred in all groups, the causative mechanisms that generated this pattern may differ between these groups. We therefore consider the possible importance of mechanisms such as aggression, simultaneous manipulation of females and female resistance in producing size assortment where males encounter numerous females that are close to moult. We also observed that prior recent guarding experience by males had no effect on latency to guard or size-assortative pairing. (C) 2002 The Association for the Study of Animal Behaviour. Published by Elsevier Science Ltd. All rights reserved.

Chitosan nanoparticle as protein delivery carrier - Systematic examination of fabrication conditions for efficient loading and release

Chitosan nanoparticles fabricated via different preparation protocols have been in recent years widely studied as carriers for therapeutic proteins and genes with varying degree of effectiveness and drawbacks. This work seeks to further explore the polyionic coacervation fabrication process, and associated processing conditions under which protein encapsulation and subsequent release can be systematically and predictably manipulated so as to obtain desired effectiveness. BSA was used as a model protein which was encapsulated by either incorporation or incubation method, using the polyanion tripolyphosphate (TPP) as the coacervation crosslink agent to form chitosan-BSA-TPP nanoparticles. The BSA-loaded chitosan-TPP nanoparticles were characterized for particle size, morphology, zeta potential, BSA encapsulation efficiency, and subsequent release kinetics, which were found predominantly dependent on the factors of chitosan molecular weight, chitosan concentration, BSA loading concentration, and chitosan/TPP mass ratio. The BSA loaded nanoparticles prepared under varying conditions were in the size range of 200-580 nm, and exhibit a high positive zeta potential. Detailed sequential time frame TEM imaging of morphological change of the BSA loaded particles showed a swelling and particle degradation process. Initial burst released due to surface protein desorption and diffusion from sublayers did not relate directly to change of particle size and shape, which was eminently apparent only after 6 h. It is also notable that later stage particle degradation and disintegration did not yield a substantial follow-on release, as the remaining protein molecules, with adaptable 3-D conformation, could be tightly bound and entangled with the cationic chitosan chains. In general, this study demonstrated that the polyionic coacervation process for fabricating protein loaded chitosan nanoparticles offers simple preparation conditions and a clear processing window for manipulation of physiochemical properties of the nanoparticles (e.g., size and surface charge), which can be conditioned to exert control over protein encapsulation efficiency and subsequent release profile. The weakness of the chitosan nanoparticle system lies typically with difficulties in controlling initial burst effect in releasing large quantities of protein molecules. (C) 2007 Elsevier B.V. All rights reserved.