ZapA, a virulence factor in a rat model of Proteus mirabilis-induced acute and chronic prostatitis.

Our knowledge of pathogenesis has benefited from a better understanding of the roles of specific virulence factors in disease. To determine the role of the virulence factor ZapA, a 54-kDa metalloproteinase of Proteus mirabilis, in prostatitis, rats were infected with either wild-type (WT) P. mirabilis or its isogenic ZapA- mutant KW360. The WT produced both acute and chronic prostatitis showing the typical histological progressions that are the hallmarks of these diseases. Infection with the ZapA- mutant, however, resulted in reduced levels of acute prostatitis, as determined from lower levels of tissue damage, bacterial colonization, and inflammation. Further, the ZapA- mutant failed to establish a chronic infection, in that bacteria were cleared from the prostate, inflammation was resolved, and tissue was seen to be healing. Clearance from the prostate was not the result of a reduced capacity of the ZapA- mutant to form biofilms in vitro. These finding clearly define ZapA as an important virulence factor in both acute and chronic bacterial prostatitis.

From Aspiration to Action: A Learning Intentions Model to Promote Critical Engagement with Science in the Print-Based Media

Science programmes which prepare students to read critically and respond thoughtfully to science-based reports in the media could play an important role in promoting informed participation in the public debate about issues relating to science, technology and society. Evidence based guidance about the practice and pattern of use of science-based media in the classroom is limited. This study sought to identify learning intentions that teachers believe ought to underpin the development of programmes of study designed to achieve this end-result. Teachers views of knowledge, skills and attitudes required to engage critically with science-based news served as a basis for this study. Teachers developed a pedagogical model by selecting appropriate statements of learning intentions, grouping these into coherent and manageable themes and coding them according to perceived level of difficulty. The model is largely compatible with current curricular provision in the UK, highlights opportunities for interdisciplinary collaboration and illustrates the developmental nature of the topic.

Family support, social capital, resilience and adolescent coping

All too often young people are excluded in practice from the general policy and professional consensus that partnership and participation should underpin work with children, young people and their families. If working with troubled and troublesome young people is to be based on family support, it will require not only the clear statement of that policy but also demonstration that it can be applied in practice. Achieving that involves setting out a plausible theory of change that can be rigorously evaluated. This paper suggests a conceptual model that draws on social support theory to harness the ideas of social capital and resilience in a way that can link formal family support interventions to adolescent coping. Research with young people attending three community-based projects for marginalized youth is used to illustrate how validated tools can be used to measure and document the detail of support, resilience, social capital and coping in young people's lives. It is also suggested that there is sufficient fit between the findings emerging from the study and the model to justify the model being more rigorously tested.

The determinants of knowledge transfer within collaborative new product development projects

Purpose – This paper explores the factors which determine the degree of knowledge transfer in inter-firm new product development projects. We test a theoretical model exploring how inter-firm knowledge transfer is enabled or hindered by a buyer’s learning intent, the degree of supplier protectiveness, inter-firm knowledge ambiguity, and absorptive capacity. Design/methodology/approach – A sample of 153 R&D intensive manufacturing firms in the UK automotive, aerospace, pharmaceutical, electrical, chemical, and general manufacturing industries were used to test the framework. Two-step structural equation modeling in AMOS 7.0 was used to analyse the data. Findings – Our results indicate that a buyer’s learning intent increases inter-firm knowledge transfer, but also acts as an incentive for suppliers to protect their knowledge. Such defensive measures increase the degree of inter-firm knowledge ambiguity, encouraging buyer firms to invest in absorptive capacity as a means to interpret supplier knowledge, but also increase the degree of knowledge transfer. Practical implications – Our paper illustrates the effects of focusing on acquisition, rather than accessing, supplier technological knowledge. We show that an overt learning strategy can be detrimental to knowledge transfer between buyer-supplier, as supplier’s react by restricting the flow of information. Organisations are encouraged to consider this dynamic when engaging in multi-organisational new product development projects. Originality/value – This paper examines the dynamics of knowledge transfer within inter-firm NPD projects, showing how transfer is influenced by the buyer firm’s learning intention, supplier’s response, characteristics of the relationship and knowledge to be transferred.

Primitive living chitons: Morphological cladistic analysis as a model for character evaluation

Chitons are often referred to as “living fossils” in part because they are proposed as one of the earliest-diverging groups of living molluscs, but also because the gross morphology of the polyplacophoran shell has been conserved for hundreds of millions of years. As such, the analysis of evolution and radiation within polyplacophorans is of considerable interest not only for resolving the shape of pan-molluscan phylogeny but also as model organisms for the study of character evolution. This study presents a new, rigorous cladistic analysis of the morphological characters used in taxonomic descriptions for chitons in the living suborder Lepidopleurina Thiele, 1910 (the earliest-derived living group of chitons). Shell-based characters alone entirely fail to recover any recognized subdivisions within the group, which may raise serious questions about the application of fossil data (from isolated shell valves). New analysis including characters from girdle armature and gill arrangements recovers some genera within the group but also points to the lack of monophyly within the main genus Leptochiton Gray, 1847. Additional characters from molecular data and soft anatomy, used in combination, are clearly needed to resolve questions of chiton relationships. However, the data sets currently available already provide interesting insights into the analytical power of traditional morphology as well as some knowledge about the early evolution and radiation of this group.

Drivers of sales performance: a contemporary meta-analysis. Have salespeople become knowledge brokers?

It has been 25 years since the publication of a comprehensive review of the full spectrum of salesperformance drivers. This study takes stock of the contemporary field and synthesizes empirical evidence from the period 1982–2008. The authors revise the classification scheme for sales performance determinants devised by Walker et al. (1977) and estimate both the predictive validity of its sub-categories and the impact of a range of moderators on determinant-sales performance relationships. Based on multivariate causal model analysis, the results make two major observations: (1) Five sub-categories demonstrate significant relationships with sales performance: selling-related knowledge (ß=.28), degree of adaptiveness (ß=.27), role ambiguity (ß=-.25), cognitive aptitude (ß=.23) and work engagement (ß=.23). (2) These sub-categories are moderated by measurement method, research context, and salestype variables. The authors identify managerial implications of the results and offer suggestions for further research, including the conjecture that as the world is moving toward a knowledge-intensive economy, salespeople could be functioning as knowledge-brokers. The results seem to back this supposition and indicate how it might inspire future research in the field of personal selling.

'Trusting the numbers': mineral prospecting, raising finance and the governance of knowledge

Mineral prospecting and raising finance for ‘junior’ mining firms has historically been regarded as a speculative activity. For the regulators of securities markets upon which ‘junior’ mining companies seek to raise capital, a perennial problem has been handling not only the indeterminacy of scientific claims, but also the social basis of epistemic practices. This paper examines the production of a system of public warrant and associated knowledge practices intended to enable investors to differentiate between ‘destructive’ and ‘productive’ varieties of financial speculation. It traces the use of the notion of ‘disclosure’ in constructing and legitimizing the ‘juniors’ market in Canada. It argues that though the work of ‘economics’ may be necessary in the construction of markets, it is by no means sufficient. Attention must also be given to the ways in which legal models of ‘the free-market’ can be translated and constantly re-worked across the sites and spaces of regulatory practice, animating the geographies of markets.

Absorbing new knowledge in small and medium-sized enterprises: A multiple case analysis of Six Sigma

The primary aim of this article is to critically analyse the development of Six Sigma theory and practice within small and medium-sized enterprises (SMEs) using a multiple case study approach. The article also explores the subsequent development of Lean Six Sigma as a means of addressing the perceived limitations of the efficacy of Six Sigma in this context. The overarching theoretical framework is that of absorptive capacity, where Six Sigma is conceptualized as new knowledge to be absorbed by smaller firms. The findings from a multiple case study involving repeat interviews and focus groups informed the development of an analytical model demonstrating the dynamic underlying routines for the absorptive capacity process and the development of a number of summative propositions relating the characteristics of SMEs to Six Sigma and Lean Six Sigma implementation.

A design model: the Autism Spectrum Disorder Classroom Design Kit

Architects and designers have a responsibility to provide an inclusive built environment. However for those with a diagnosis of Autism Spectrum Disorder (ASD), the built environment can be a frightening and confusing place, difficult to negotiate and tolerate. The challenge of integrating more fully into society is denied by an alienating built environment. For ASD pupils in a poorly designed school, their environment can distance them from learning. Instead, if more at ease in their surroundings, in an ASD-friendly environment, the ASD pupil stands a greater chance of doing better.

However a difficulty exists in that most architects are not knowledgeable in designing for those with ASD. Any available design guidelines for architects tend, because of the inherent difficulties associated with a spectrum, to be general in their information. Therefore, if wanting to provide an ASD-friendly learning environment, there is a need to ensure that teachers, as the experts, can most clearly and effectively impart their knowledge and requirements to architects.

This paper sets out the challenges and difficulties inherent in the design process when designing for ASD. It then sets out an alternative strategy to the usual method of drawing-centric dialogue between teacher and architect by using models instead as a basis for a more common language. An ASD Classroom Design Kit was designed and developed by Queen’s University of Belfast Architecture students. It was then used by ASD teaching staff from the Southern Education and Library Board in Northern Ireland as a case study to trial its effectiveness. The paper outlines how the study was carried out before concluding with reflections by both teaching staff and architect on using the ASD Classroom Design Kit.

It is hoped that this paper will firstly highlight the need for better dialogue between expert and architect when considering ASD and the Built Environment and secondly, that it may encourage others to consider using models to convey their ideas and knowledge when designing, not just for ASD, but for other Special Educational Needs and disabilities.

Inscribing value on business model innovations: Insights from industrial projects commercializing disruptive digital innovations

In this paper we seek to show how marketing activities inscribe value on business model innovation, representative of an act, or sequence of socially interconnecting acts. Theoretically we ask two interlinked questions: (1) how can value inscriptions contribute to business model innovations? (2) how can marketing activities support the inscription of value on business model innovations? Semi-structured in-depth interviews were conducted with the thirty-seven members from across four industrial projects commercializing disruptive digital innovations. Various individuals from a diverse range of firms are shown to cast relevant components of their agency and knowledge on business model innovations through negotiation as an ongoing social process. Value inscription is mutually constituted from the marketing activities, interactions and negotiations of multiple project members across firms and functions to counter destabilizing forces and tensions arising from the commercialization of disruptive digital innovations. This contributes to recent conceptual thinking in the industrial marketing literature, which views business models as situated within dynamic business networks and a context-led evolutionary process. A contribution is also made to debate in the marketing literature around marketing's boundary-spanning role, with marketing activities shown to span and navigate across functions and firms in supporting value inscriptions on business model innovations.

Illumination invariant facial recognition using a piecewise-constant lighting model

In this paper we demonstrate a simple and novel illumination model that can be used for illumination invariant facial recognition. This model requires no prior knowledge of the illumination conditions and can be used when there is only a single training image per-person. The proposed illumination model separates the effects of illumination over a small area of the face into two components; an additive component modelling the mean illumination and a multiplicative component, modelling the variance within the facial area. Illumination invariant facial recognition is performed in a piecewise manner, by splitting the face image into blocks, then normalizing the illumination within each block based on the new lighting model. The assumptions underlying this novel lighting model have been verified on the YaleB face database. We show that magnitude 2D Fourier features can be used as robust facial descriptors within the new lighting model. Using only a single training image per-person, our new method achieves high (in most cases 100%) identification accuracy on the YaleB, extended YaleB and CMU-PIE face databases.

Enhancing family physician capacity to deliver quality palliative home care:An end-of-life, shared-care model

PROBLEM BEING ADDRESSED: Family physicians face innumerable challenges to delivering quality palliative home care to meet the complex needs of end-of-life patients and their families. OBJECTIVE OF PROGRAM: To implement a model of shared care to enhance family physicians' ability to deliver quality palliative home care, particularly in a community-based setting. PROGRAM DESCRIPTION: Family physicians in 3 group practices (N = 21) in Ontario's Niagara West region collaborated with an interprofessional palliative care team (including a palliative care advanced practice nurse, a palliative medicine physician, a bereavement counselor, a psychosocial-spiritual advisor, and a case manager) in a shared-care partnership to provide comprehensive palliative home care. Key features of the program included systematic and timely identification of end-of-life patients, needs assessments, symptom and psychosocial support interventions, regular communication between team members, and coordinated care guided by outcome-based assessment in the home. In addition, educational initiatives were provided to enhance family physicians' knowledge and skills. CONCLUSION: Because of the program, participants reported improved communication, effective interprofessional collaboration, and the capacity to deliver palliative home care, 24 hours a day, 7 days a week, to end-of-life patients in the community.

Knowledge Formation and the Great Divergence between China and Europe: Manuscripts and Printed Books, ca. 581–1840

Literature dealing with the history of Chinese printed books and printing is voluminous. Yet studies of how knowledge in general and utilitarian forms of knowledge in particular were generated, accumulated and circulated by printed books and their relationship with the long-term socio-economic transformation of China are rare. This paper aims to open up the subject by examining the long-term trends in the production of manuscripts and books and focusing on the connections between the generation and dissemination of useful knowledge in China and the production and circulation of printed books over the centuries and dynasties from circa 581 to 1840 compared to Europe. It connects trends in this indicator for knowledge formation and diffusion to economic growth, urbanization, changes in higher forms of education, the rise of literacy, the development of printing technologies, and changes in perceptions of the natural world. It concludes that human capital formation in China probably proceeded at a slower rate,which is relevant for narratives of the “divergence” between China and Europe.

Morphological cladistic analysis as a model for character evaluation in primitive living chitons (Polyplacophora, Lepidopleurina)

Chitons are often referred to as "living fossils" in part because they are proposed as one of the earliest-diverging groups of living molluscs, but also because the gross morphology of the polyplacophoran shell has been conserved for hundreds of millions of years. As such, the analysis of evolution and radiation within polyplacophorans is of considerable interest not only for resolving the shape of pan-molluscan phylogeny but also as model organisms for the study of character evolution. This study presents a new, rigorous cladistic analysis of the morphological characters used in taxonomic descriptions for chitons in the living suborder Lepidopleurina Thiele, 1910 (the earliest-derived living group of chitons). Shell-based characters alone entirely fail to recover any recognized subdivisions within the group, which may raise serious questions about the application of fossil data (from isolated shell valves). New analysis including characters from girdle armature and gill arrangements recovers some genera within the group but also points to the lack of monophyly within the main genus Leptochiton Gray, 1847. Additional characters from molecular data and soft anatomy, used in combination, are clearly needed to resolve questions of chiton relationships. However, the data sets currently available already provide interesting insights into the analytical power of traditional morphology as well as some knowledge about the early evolution and radiation of this group.

Online Multiperson Tracking With Occlusion Reasoning and Unsupervised Track Motion Model

We address the problem of multi-target tracking in realistic crowded conditions by introducing a novel dual-stage online tracking algorithm. The problem of data-association between tracks and detections, based on appearance, is often complicated by partial occlusion. In the first stage, we address the issue of occlusion with a novel method of robust data-association, that can be used to compute the appearance similarity between tracks and detections without the need for explicit knowledge of the occluded regions. In the second stage, broken tracks are linked based on motion and appearance, using an online-learned linking model. The online-learned motion-model for track linking uses the confident tracks from the first stage tracker as training examples. The new approach has been tested on the town centre dataset and has performance comparable with the present state-of-the-art