Effect of excitation wavelength on the Raman spectroscopy of the porcine photoreceptor layer from the area centralis.

Raman microscopy, based upon the inelastic scattering (Raman) of light by molecular species, has been applied as a specific structural probe in a wide range of biomedical samples. The purpose of the present investigation was to assess the potential of the technique for spectral characterization of the porcine outer retina derived from the area centralis, which contains the highest proportion of cone:rod cell ratio in the pig retina. METHODS: Retinal cross-sections, immersion-fixed in 4% (w/v) PFA and cryoprotected, were placed on salinized slides and air-dried prior to direct Raman microscopic analysis at three excitation wavelengths, 785 nm, 633 nm, and 514 nm. RESULTS: Raman spectra of each of the photoreceptor inner and outer segments (PIS, POS) and of the outer nuclear layer (ONL) of the retina acquired at 785 nm were dominated by vibrational features characteristic of proteins and lipids. There was a clear difference between the inner and outer domains in the spectroscopic regions, amide I and III, known to be sensitive to protein conformation. The spectra recorded with 633 nm excitation mirrored those observed at 785 nm excitation for the amide I region, but with an additional pattern of bands in the spectra of the PIS region, attributed to cytochrome c. The same features were even more enhanced in spectra recorded with 514 nm excitation. A significant nucleotide contribution was observed in the spectra recorded for the ONL at all three excitation wavelengths. A Raman map was constructed of the major spectral components found in the retinal outer segments, as predicted by principal component analysis of the data acquired using 633 nm excitation. Comparison of the Raman map with its histological counterpart revealed a strong correlation between the two images. CONCLUSIONS: It has been demonstrated that Raman spectroscopy offers a unique insight into the biochemical composition of the light-sensing cells of the retina following the application of standard histological protocols. The present study points to the considerable promise of Raman microscopy as a component-specific probe of retinal tissue.

Characterization of the physicochemical, antimicrobial, and drug release properties of thermoresponsive hydrogel copolymers designed for medical device applications

In this study, a series of hydrogels was synthesized by free radical polymerization, namely poly(2-(hydroxyethyl) methacrylate) (pHEMA), poly(4-(hydroxybutyl)methacrylate) (pHBMA), poly(6-(hydroxyhexyl)methacrylate) (pHHMA), and copolymers composed of N-isopropylacrylamide (NIPAA), methacrylic acid (MA), NIPAA, and the above monomers. The surface, mechanical, and swelling properties (at 20 and 37 degrees C, pH 6) of the polymers were determined using dynamic contact angle analysis, tensile analysis, and thermogravimetry, respectively. The T-g and lower critical solution temperatures (LCST) were determined using modulated DSC and oscillatory rheometry, respectively. Drug loading of the hydrogels with chlorhexidine diacetate was performed by immersion in a drug solution at 20 degrees C (

The 2003 November 14 occultation by Titan of TYC 1343-1865-1

We observed a stellar occultation by Titan on 2003 November 14 from La Palma Observatory using ULTRACAM with three Sloan filters: u, g, and i (358, 487, and 758 nm, respectively). The occultation probed latitudes 2°?S and 1°?N during immersion and emersion, respectively. A prominent central flash was present in only the i filter, indicating wavelength-dependent atmospheric extinction. We inverted the light curves to obtain six lower-limit temperature profiles between 335 and 485 km (0.04 and 0.003 mb) altitude. The i profiles agreed with the temperature measured by the Huygens Atmospheric Structure Instrument [Fulchignoni, M., and 43 colleagues, 2005. Nature 438, 785 791] above 415 km (0.01 mb). The profiles obtained from different wavelength filters systematically diverge as altitude decreases, which implies significant extinction in the light curves. Applying an extinction model [Elliot, J.L., Young, L.A., 1992. Astron. J. 103, 991 1015] gave the altitudes of line of sight optical depth equal to unity: 396±7 and 401±20 km (u immersion and emersion); 354±7 and 387±7 km (g immersion and emersion); and 336±5 and 318±4 km (i immersion and emersion). Further analysis showed that the optical depth follows a power law in wavelength with index 1.3±0.2. We present a new method for determining temperature from scintillation spikes in the occulting body's atmosphere. Temperatures derived with this method are equal to or warmer than those measured by the Huygens Atmospheric Structure Instrument. Using the highly structured, three-peaked central flash, we confirmed the shape of Titan's middle atmosphere using a model originally derived for a previous Titan occultation [Hubbard, W.B., and 45 colleagues, 1993. Astron. Astrophys. 269, 541 563].

Neoteric optical media for refractive index determination of gems and minerals

Refractive index determination of minerals and gems often requires their immersion in fluids with the same refractive index. However, these natural materials frequently have refractive indices above the ranges of common organic solvents. Most available high refractive index immersion materials are solid at room temperature, toxic, noxious, corrosive, carcinogenic, or any combination thereof. Since the physical properties of ionic liquids can be tuned by varying the cation and/or anion, we have developed immersion fluids for mineralogical studies which are relatively benign. We report here the syntheses of a range of ionic liquids ( many novel) based on the 1-alkyl-3-methylimidazolium cation, which all have refractive indices greater than 1.4, and can be used as immersion fluids for optical mineralogy studies. We further show that for a series of ionic liquids with the same anion, the refractive indices can be adjusted by systematic changes in the cation.

Refractive indices of ionic liquids

At present, optical microscopy studies of minerals, especially diamonds, are hampered by the lack of available high refractive index (> 1.8) immersion fluids. We report here the syntheses and refractive indices of some 1-alkyl-3-methylimidazolium based ionic liquids containing polyhalide anions, which exhibit refractive indices between 1.6 and 2.23, and thus significantly extend the range of minerals which can be studied.

Fluorescence (FISH) and chromogenic (CISH) in situ hybridisation in prostate carcinoma cell lines: comparison and use of virtual microscopy

Chromogenic in situ hybridisation (CISH) has become an attractive alternative to fluorescence in situ hybridisation (FISH) due to its permanent stain which is more familiar to pathologists and because it can be viewed using light microscopy, The aim of the present study is to examine reproducibility in the assessment of abnormal chromosome number by CISH in comparison to FISH. Using three prostate cell lines - PNTIA (derived from normal epithelium), LNCAP and DU145 (derived from prostatic carcinoma), chromosomes 7 and 8 were counted in 40 nuclei in FISH preparations (x100 oil immersion) and 100 nuclei in CISH preparations (x40) by two independent observers. The CISH slides were examined using standard fight microscopy and virtual microscopy. Reproducibitity was examined using paired Student's t-test (P

Agitating for a design and regeneration agenda in a postconflict city: the case of Belfast

Introduction

Belfast has been a focus of academic attention for the last forty years with most interest centred on various aspects of ‘the Troubles’. Where there has been interest in the built environment, it has largely been about how the ‘security situation’ impacted directly on architecture and on the design and layout of social housing. This paper seeks to go beyond this to explore how the political- administrative culture of ‘the Troubles’ interacted with ‘normal’ market forces to shape the central area of the city, and to consider the responses of a recently formed activist group, known as the Forum for Alternative Belfast (hereafter referred to as the Forum). The paper is written by three of the directors of the Forum.1 Moreover, the empirical research presented here was undertaken by the Forum as part of a campaign to address issues relating to the design, layout and quality of Belfast’s built environment. In the longstanding tradition of participant observation working within an action-research paradigm, the participants have attempted to offer an account that is evidentially and purposefully selfcritical and reflective. It is of course recognised that while this approach offers many positive attributes, such as phenomenological access through immersion in the project, it also has the potential to bring compromise on research detachment and objectivity.2 To address the latter, the authors have attempted
to avoid polemical argument, and to support claims with primary or secondary research evidence. The authors also acknowledge that action-research has a chequered history; however, they would argue
that their approach is faithful to a concept that sees ‘research’ defined as understanding and ‘action’ defined as seeking change. The Forum’s very purpose is to seek change, but to do this requires evidence, collaboration and demonstration. And in this sense, it is a learning process for all participants, including the research activists, government officials, community organisations and students. The authors also recognise the complexity of factors that affect urban management and change, particularly in a city such as Belfast, which has had to cope with political violence for over thirty years. And they appreciate that in the context of conflict, governance is skewed to cope with political realities. Hamdi reminds us, however, that in practice there is an ‘important dialectic between top-down planning, with its formal and designed laws and structures, and bottom-up selforganizing collectivism—those “quantum and emergent systems” which Jane Jacobs argued long ago give cities their life and order.’3

Legitimacy Through Neutrality: Probation and Conflict in Northern Ireland

The conflict in Northern Ireland known as the Troubles presented numerous challenges for the administration of traditional forms of criminal justice and has led to a variety of adaptations that have been widely discussed in the literature in criminology and transitional justice. The role of Northern Ireland's probation service is often forgotten or ignored in such analyses. This brief article is intended to begin to fill this gap by exploring how the Troubles impacted on probation practice during the Conflict and beyond. In particular, we argue that the 'neutrality stance' taken by probation in the mid-1970s, when officers decided to cease mandated work with individuals charged with 'politically-motivated' offences, has had a lasting impact on the identity and role of probation in the region. The deep immersion into, and engagement with, marginalised communities during this time, facilitated by this neutrality stance, has overlooked implications for probation practice more widely in the United Kingdom and abroad.

New Technology and Researchers’ Access to Court and Tribunal Information: the need for European analysis

We discuss the limitations and rights which may affect the researcher’s access to and use of digital, court and administrative tribunal based information. We suggest that there is a need for a European-wide investigation of the legal framework which affects the researcher who might wish to utilise this form of information. A European-wide context is required because much of the relevant law is European rather than national, but much of the constraints are cultural. It is our thesis that research improves understanding and then improves practice as that understanding becomes part of public debate. If it is difficult to undertake research, then public debate about the court system – its effectiveness, its biases, its strengths – becomes constrained. Access to court records is currently determined on a discretionary basis or on the basis of interpretation of rules of the court where these are challenged in legal proceedings. Anecdotal evidence would suggest that there are significant variations in the extent to which court documents such as pleadings, transcripts, affidavits etc are made generally accessible under court rules or as a result of litigation in different jurisdictions or, indeed, in different courts in the same jurisdiction. Such a lack of clarity can only encourage a chilling of what might otherwise be valuable research. Courts are not, of course, democratic bodies. However, they are part of a democratic system and should, we suggest – both for the public benefit and for their proper operation – be accessible and criticisable by the independent researcher. The extent to which the independent researcher is enabled access is the subject of this article. The rights of access for researchers and the public have been examined in other common law countries but not, to date, in the UK or Europe.

The effect of the binder size and viscosity on agglomerate growth in fluidised hot melt granulation

Fluidised hot melt granulation (FHMG) is a novel granulation technique for processing pharmaceutical powders. Several process and formulation parameters have been shown to significantly influence granulation characteristics within FHMG. In this study we have investigated the effect of the binder properties (binder particle size and binder viscosity) on agglomerate growth mechanisms within FHMG. Low-melting point co-polymers of polyoxyethylene–polyoxypropylene (Lutrol® F68 Poloxamer 188 and Lutrol® F127 Poloxamer 407) were used as meltable binders for FHMG, while standard ballotini beads were used as model fillers for this process. Standard sieve analysis was used to determine the size distribution of granules whereas we utilised fluorescence microscopy to investigate the distribution of binder within granules. This provided further insight into the growth mechanisms during FHMG. Binder particle size and viscosity were found to affect the onset time of granulation. Agglomerate growth achieved equilibrium within short time-scales and was shown to proceed by two competing processes, breakage of formed granules and re-agglomeration of fractured granules. Breakage was affected by the initial material properties (binder size and viscosity). When using binder with a small particle size (<250 µm), agglomerate growth via a distribution mechanism dominated. Increasing the binder particle size shifted the granulation mechanism such that agglomerates were formed predominantly via immersion. A critical ratio between binder diameter and filler has been calculated and this value may be useful for predicting or controlling granulation growth processes.

A study of factors that change the wettability of titania films

The effect of several pretreatment methods on the wettability of polycrystalline titania-coated glass (Pilkington Activ) and plain glass are investigated. UV/ozone, immersion in aqua regia, and heating (T > 500 degrees C) render both substrates superhydrophilic (i.e., water contact angle (CA)

In situ, continuous monitoring of the photoinduced superhydrophilic effect: Influence of UV-type and ambient atmospheric and droplet composition

A controlled-atmosphere chamber, combined with a CCTV system, is used to monitor continuously the change in shape of water droplets on the self-cleaning commercial glass, Activ, and a sol-gel TiO2 substrate during their irradiation with either UVA or UVC light. This system allows the photoinduced superhydrophilic effect (PSH) exhibited by these materials to be studied in real time under a variety of different conditions. UVA was less effective than UVC in terms of PSH for both titania-coated glasses, and plain glass was unaffected by either form of UV irradiation and so showed no PSH activity. With UVA, ozone increased significantly the rate of PSH for both substrates, but had no effect on the wettability of plain glass. For both titania substrates and plain glass, no PSH activity was observed under an O-2-free atmosphere. A more detailed study of the PSH effect exhibited by Activ revealed that doping the water droplet with either an electron acceptor (Na2S2O8), electron donor (Na2S2O4), or simple electrolyte (KCl) in the absence of oxygen did not promote PSH. However, when Activ was UV irradiated, while immersed in a deoxygenated KCl solution, prior to testing for PSH activity, only a small change in contact angle was observed, whereas under the same conditions, but using a deoxygenated persulfate-containing immersion solution, it was rendered superhydrophilic. The correlation between organic contaminant removal and surface wetting was also investigated by using thick sol-gel films coated with stearic acid; the destruction of SA was monitored by FTIR and sudden wetting of the surface was seen to coincide with the substantial removal of the organic layer. The results of this work are discussed in the context of the current debate on the underlying cause of PSH.

Antimicrobial peptide incorporated poly(2-hydroxyethyl methacrylate) hydrogels for the prevention of Staphylococcus epidermidis-associated biomaterial infections

The effectiveness of the antimicrobial peptide maximin-4, the ultrashort peptide H-Orn-Orn-Trp-Trp-NH(2) , and the lipopeptide C(12) -Orn-Orn-Trp-Trp-NH(2) in preventing adherence of pathogens to a candidate biomaterial were tested utilizing both matrix- and immersion-loaded poly(2-hydroxyethyl methacrylate) (poly(HEMA)) hydrogels. Antiadherent properties correlated to both the concentration released and the relative antimicrobial concentrations of each compound against Staphylococcus epidermidis ATCC 35984, at each time point. Immersion-loaded samples containing C(12) -Orn-Orn-Trp-Trp-NH(2) exhibited the lowest adherence profile for all peptides studied over 1, 4, and 24 h. The results outlined in this article show that antimicrobial peptides have the potential to serve as an important weapon against biomaterial associated infections. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2012.

Novel semi-interpenetrating hydrogel networks with enhanced mechanical properties and thermoresponsive engineered drug delivery, designed as bioactive endotracheal tube biomaterials

Thermoresponsive polymeric platforms are used to optimise drug delivery in pharmaceutical systems and bioactive medical devices. However, the practical application of these systems is compromised by their poor mechanical properties. This study describes the design of thermoresponsive semi-interpenetrating polymer networks (s-IPNs) based on cross-linked p(NIPAA) or p(NIPAA-co-HEMA) hydrogels containing poly(e-caprolactone) designed to address this issue. Using DSC, the lower critical solution temperature of the co-polymer and p(NIPAA) matrices were circa 34 °C and 32 °C, respectively. PCL was physically dispersed within the hydrogel matrices as confirmed using confocal scanning laser microscopy and DSC and resulted in marked changes in the mechanical properties (ultimate tensile strength, Young's modulus) without adversely compromising the elongation properties. P(NIPAA) networks containing dispersed PCL exhibited thermoresponsive swelling properties following immersion in buffer (pH 7), with the equilibrium-swelling ratio being greater at 20 °C than 37 °C and greatest for p(NIPAA)/PCL systems at 20 °C. The incorporation of PCL significantly lowered the equilibrium swelling ratio of the various networks but this was not deemed practically significant for s-IPNs based on p(NIPAA). Thermoresponsive release of metronidazole was observed from s-IPN composed of p(NIPAA)/PCL at 37 °C but not from p(NIPAA-co-HEMA)/PCL at this temperature. In all other platforms, drug release at 20 °C was significantly similar to that at 37 °C and was diffusion controlled. This study has uniquely described a strategy by which thermoresponsive drug release may be performed from polymeric platforms with highly elastic properties. It is proposed that these materials may be used clinically as bioactive endotracheal tubes, designed to offer enhanced resistance to ventilator associated pneumonia, a clinical condition associated with the use of endotracheal tubes where stimulus responsive drug release from biomaterials of significant mechanical properties would be advantageous. © 2012 Elsevier B.V. All rights reserved.

Moments of Recognition:The Four Semester Studio in QUB

It is a legitimate assertion that the common ground of work of worth in architecture, whether theoretical or built comes from a firmly held position on the part of the author. In addition to delivery key competencies architectural education should act to support the formation of such a position in the student, or to make students aware of the possibility of holding such a position.

It is with this in mind perhaps that intensive unit-based diploma and masters structures are increasingly becoming the standard structure for for schools of architecture across the UK. The strengths of such a structure are most evident when the school, either by virtue of financial strength or geographic location is able to attract a diverse range of contrasting positions to bear in the formation of these units. In effect the offering to the student is a short, intensive immersion into a clear line of thought based on the position of those running the unit. Research is channeled by those running the unit to the work of the students. A single cohort of students therefore is able to observe and understand a wide range of ways of thinking about the subject whether or not they are participants in a unit or not. It is axiomatic that where this structure is applied in the absence of these resources the result can be less helpful, individual units are differentiated not to reflect the interests of those running the unit but for the sake of difference as its own end.

In structuring the M.Arch programme in Queens University Belfast the reality of our somewhat peripheral location was placed at the forefront of our considerations. A single 4 semester studio is offered. The first three semesters are carefully structured to offer a range of directed and self directed projects to the students. By interrogation of these projects, and work undertaken at undergraduate level the aim is to assist the students to identify a personal position on architecture, which is then developed in the thesis in semester four. Research and design outputs are emergent from the interest of the student body, cultivated by staff who have the time over the four semesters to get to know all aspects of a students interests.

This paper will lay out this structure and some of the projects run within it. Now having delivered two graduating years the successes and challenges of the system will be laid out by reference to several case studies of individual student experiences of the structure.