Bridging Jeffrey's Rule, AGM Revision and Dempster Conditioning in the Theory of Evidence

Belief revision characterizes the process of revising an agent’s beliefs when receiving new evidence. In the field of artificial intelligence, revision strategies have been extensively studied in the context of logic-based formalisms and probability kinematics. However, so far there is not much literature on this topic in evidence theory. In contrast, combination rules proposed so far in the theory of evidence, especially Dempster rule, are symmetric. They rely on a basic assumption, that is, pieces of evidence being combined are considered to be on a par, i.e. play the same role. When one source of evidence is less reliable than another, it is possible to discount it and then a symmetric combination operation
is still used. In the case of revision, the idea is to let prior knowledge of an agent be altered by some input information. The change problem is thus intrinsically asymmetric. Assuming the input information is reliable, it should be retained whilst the prior information should be changed minimally to that effect. To deal with this issue, this paper defines the notion of revision for the theory of evidence in such a way as to bring together probabilistic and logical views. Several revision rules previously proposed are reviewed and we advocate one of them as better corresponding to the idea of revision. It is extended to cope with inconsistency between prior and input information. It reduces to Dempster
rule of combination, just like revision in the sense of Alchourron, Gardenfors, and Makinson (AGM) reduces to expansion, when the input is strongly consistent with the prior belief function. Properties of this revision rule are also investigated and it is shown to generalize Jeffrey’s rule of updating, Dempster rule of conditioning and a form of AGM revision.

Hemostatic alterations with exercise conditioning in NIDDM

Various parameters of coagulation and fibrinolysis were measured in 13 men (aged 54 +/- 3 yr) with non-insulin-dependent diabetes mellitus (NIDDM) before and after 12-14 wk of exercise training. Subjects exercised for 30 min 3 times/wk at 70% of maximum O2 consumption (VO2max). Training increased VO2max by 12.5% but did not alter body weight, relative body fat, blood pressure, cholesterol, triglycerides, or high-density lipoprotein cholesterol. Slight downward trends were apparent for fasting glucose and insulin, but glycosylated hemoglobin was unchanged. There were no changes in coagulation parameters of plasminogen, hematocrit, or alpha 2-antiplasmin. Plasma fibrinogen (303 +/- 24.2 vs. 256 +/- 12.3 mg/dl) and fibronectin (380 +/- 41.9 vs. 301 +/- 22.2 micrograms/ml) were significantly reduced (P less than 0.02) by exercise conditioning. Three assays of fibrinolytic activity (tissue plasminogen activator, euglobulin lysis time, and an isotopic measure of fibrinolysis) confirmed that neither basal fibrinolysis nor the fibrinolytic responses to venous occlusion and maximal exercise were significantly altered. Exercise conditioning may have antithrombotic effects in NIDDM by reducing plasma fibrinogen and fibronectin. Although the significance of the fall in fibronectin awaits further studies, the reduction in plasma fibrinogen gives a rationale for the use of exercise training in men with NIDDM.

Soil conditioning for EPBMs

Nowadays, the Earth Pressure Balanced (EPB) shields are used more and more caused by both the mechanical development of the machines and the more effective use of additives such as foams and polymers. These additives are used to condition spoil in the screw conveyor. A crucial component of EPB tunnelling applications is ground conditioning. Thus, in order to permit quantitative measurements of the conditioned ground behavior, it is necessary to develop and use a test able to simulate the extraction of earth from the chamber with a screw conveyor. This reliable test procedure can provide quantitative parameters that can really describe the conditioned soil behavior.

Laboratory tests for EPB tunnelling soil conditioning

The screw conveyor system plays a fundamental role during the EPB tunnelling operations for the tunnel face pressure control. On the other hand, the use of additives such chemical foams is even more applied in order to extend the EPB technology to the cohesionless soils. Despite the extensive use of the EPB technique in urban environment, little knowledge exists in the understanding of the behavior of such conditioned soil during the excavation operations. At the Turin University of Technology the Tunnelling and Underground Space Centre, in the mainframe of a wider research on soil conditioning, has developed an experimental apparatus that simulates the extraction phase with screw conveyor from a pressurized tank. In this paper the apparatus is presented and the results of a first series of tests carried out on sand are discussed. © 2007 Taylor & Francis Group.

Soil conditioning of sand for EPB applications:A laboratory research

EPB tunnelling requires the application of soil conditioning to increase its field of applicability particularly for cohesionless soils. Choosing the most suitable conditioning set for the various soils requires the use of a feasible laboratory test which can permit to define the characteristics of the conditioned soils and provide measurable data. A series of tests has been carried out using a laboratory screw conveyor device which was designed for this purpose and which simulates the extraction of the spoil from a pressure chamber in a similar way as in EPB tunnelling. The tested soils were medium-grain sands with varying amounts of silt and the tested conditioned mixtures were obtained with different water contents and amounts of foam. A simple slump test was also used to analyze the global characteristics of the conditioned soils. The test has shown that the proposed laboratory procedure permits a quantitative comparison to be made between different conditioning amounts and agents on the basis of measurable parameters. © 2007 Elsevier Ltd. All rights reserved.

Soil Conditioning and Ground Monitoring for Shield Tunnelling

Soil conditioning consists of mixing and remolding the natural material during the mechanical excavation of tunnels, generally at low depth, with additives, in order to obtain suitable properties of plasticity and consistency for the excavated material, so becoming able to apply a counterpressure against natural earth pressure and groundwater flow towards the excavation chamber. The assessment and the control of the soil parameters and of machine performance are fundamental for a regular and safe excavation, also with regards to surface stability. This paper mainly focus on testing approach aimed to the proper soil conditioning with EPB shields, whose results have been validated at real scale. The influence of the water content and the amount of conditioning foam has been studied by the Authors. A proper definition of conditioning parameters can allow to extend the application field of Earth Pressure Balance (EPB) tunnel machines to various grain soil distribution, even in weak rock formations (e.g. siltstone or flysch). Importance of conditioning is reflected also on the possibility of a proper spoil disposal or better for its reuse.

Hygrothermal Features of Laterite Dimension Stones for Sub-Saharan Residential Building Construction

The building sector is widely recognized as having a major impact on sustainable development. Both in developed and developing countries, sustainability in buildings approaches are growing. Laterite dimension stone (LDS) is a building material that was traditionally used in sub-Saharan Africa, but its technical features still need to be assessed. This article presents some results of a study focused on the characterization of LDS exploited in Burkina Faso for building purposes. The measured average thermal conductivity is 0.51  W/mK, which increases with water content and evolves with the specific gravity and with porosity. Rock mineral phases (quartz, goethite, hematite, magnetite) are cemented by kaolinite. The porosity of the material is high (30%), with macropores visible on the surface and found in the rock inner structure as well. Results from the hygrothermal monitoring of a pilot building are also presented.

Treatment of relapse after allogeneic bone marrow transplantation with reduced intensity conditioning (FLAG +/- Ida) and second allogeneic stem cell transplant

Acute leukaemias in relapse after allogeneic stem cell transplantation (SCT) respond poorly to donor leucocyte infusions (DLI) compared with chronic myeloid leukaemia (CML), at least in part because of faster disease kinetics. Fludarabine-containing 'non-myeloablative' chemotherapy followed by further allo SCT may offer more rapid and effective disease control. We report 14 patients with relapse after allo SCT for acute leukaemia [seven acute myeloid leukaemia (AML), five acute lymphoblastic leukaemia (ALL)] or refractory anaemia with excess blasts in transformation (RAEB-t, n = 2) treated with fludarabine, high-dose cytosine arabinoside (ara-C) and granulocyte colony-simulating factor (G-CSF) with (n = 10) or without (n = 2) idarubicin (FLAG +/- Ida) or DaunoXome (FLAG-X) (n = 2) and second allo SCT from the original donor. Donors were fully human leucocyte antigen (HLA) -matched in 13 cases with a single class A mismatch in one. Actuarial overall survival was 60% and disease-free survival was 26% at 58 months. Remissions after the second SCT were longer than those after the first bone marrow transplantation (BMT) in eight of the 13 assessable patients to date. Haematopoietic recovery was rapid. Transplants were well tolerated with no treatment-related deaths. The major complication was graft-versus-host disease (GvHD, acute >/= grade II-2 cases, chronic - eight cases, two limited, six extensive) although there have been no deaths attributable to this. FLAG +/- Ida and second allo SCT is a safe and useful approach and may be more effective than DLI in the treatment of acute leukaemias relapsing after conventional allo SCT.

Short Report:Engraftment of T-cell-depleted allogeneic haematopoietic stem cells using a reduced intensity conditioning regimen

Graft-versus-host disease (GVHD) remains a significant complication in patients undergoing allogeneic stem cell transplantation (SCT) using a reduced intensity conditioning regimen. Although T-cell depletion (TCD) reduces the risk of GVHD after a myeloablative conditioning regimen, it is associated with an increased risk of graft failure. We have therefore examined whether TCD compromises engraftment using a fludarabine-based conditioning regimen. Fifteen patients have been transplanted using such a regimen of whom 13 underwent ex vivo TCD. All but one patient demonstrated durable engraftment and no patient receiving a TCD product developed severe GVHD. Thus, TCD may play a role in GvHD prophylaxis using such regimens.

Phasic modulation of corticomotor excitability during passive movement of the upper limb: effects of movement frequency and muscle specificity

Modulations in the excitability of spinal reflex pathways during passive rhythmic movements of the lower limb have been demonstrated by a number of previous studies [4]. Less emphasis has been placed on the role of supraspinal pathways during passive movement, and on tasks involving the upper limb. In the present study, transcranial magnetic stimulation (TMS) was delivered to subjects while undergoing passive flexion-extension movements of the contralateral wrist. Motor evoked potentials (MEPs) of flexor carpi radialis (FCR) and abductor pollicus brevis (APB) muscles were recorded. Stimuli were delivered in eight phases of the movement cycle during three different frequencies of movement. Evidence of marked modulations in pathway excitability was found in the MEP amplitudes of the FCR muscle, with responses inhibited and facilitated from static values in the extension and flexion phases, respectively. The results indicated that at higher frequencies of movement there was greater modulation in pathway excitability. Paired-pulse TMS (sub-threshold conditioning) at short interstimulus intervals revealed modulations in the extent of inhibition in MEP amplitude at high movement frequencies. In the APE muscle, there was some evidence of phasic modulations of response amplitude, although the effects were less marked than those observed in FCR. It is speculated that these modulatory effects are mediated via Ia afferent pathways and arise as a consequence of the induced forearm muscle shortening and lengthening. Although the level at which this input influences the corticomotoneuronal pathway is difficult to discern, a contribution from cortical regions is suggested. (C) 2001 Published by Elsevier Science B.V.

Simulation of coupled heat and moisture transfer in air-conditioned buildings

The simultaneous heat and moisture transfer in the building envelope has an important influence on the indoor environment and the overall performance of buildings. In this paper, a model for predicting whole building heat and moisture transfer was presented. Both heat and moisture transfer in the building envelope and indoor air were simultaneously considered; their interactions were modeled. The coupled model takes into account most of the main hygrothermal effects in buildings. The coupled system model was implemented in MATLAB-Simulink, and validated by using a series of published testing tools. The new program was applied to investigate the moisture transfer effect on indoor air humidity and building energy consumption under different climates. The results show that the use of more detailed simulation routines can result in improvements to the building's design for energy optimisation through the choice of proper hygroscopic materials, which would not be indicated by simpler calculation techniques.

Kinematic Design of a 6-DOF Parallel Manipulator with Decoupled Translation and Rotation

A new three-limb, six-degree-of-freedom (DOF) parallel manipulator (PM), termed a selectively actuated PM (SA-PM), is proposed. The end-effector of the manipulator can produce 3-DOF spherical motion, 3-DOF translation, 3-DOF hybrid motion, or complete 6-DOF spatial motion, depending on the types of the actuation (rotary or linear) chosen for the actuators. The manipulator architecture completely decouples translation and rotation of the end-effector for individual control. The structure synthesis of SA-PM is achieved using the line geometry. Singularity analysis shows that the SA-PM is an isotropic translation PM when all the actuators are in linear mode. Because of the decoupled motion structure, a decomposition method is applied for both the displacement analysis and dimension optimization. With the index of maximal workspace satisfying given global conditioning requirements, the geometrical parameters are optimized. As a result, the translational workspace is a cube, and the orientation workspace is nearly unlimited.

Continuity and Change in the European Union’s Approach to Enlargement::Turkey and Central and Eastern Europe compared

Existing studies of European Union (EU) enlargement provide few answers to questions concerning continuity and change in the dynamics of the process. This article identifies a number of conditioning factors that have shaped the EU’s approach to eastern enlargement and traces elements of continuity and change in the EU’s handling of Turkey’s membership aspirations. The article focuses on three established factors – member state preferences, supranational activism and EU capacity – and two less prominent factors – public opinion and narrative frame