21 resultados para Grain boundary segregation
Resumo:
We have excited mid-infrared surface plasmons in two YBCO thin films of contrasting properties using attenuated total reflection of light and found that the imaginary part of the dielectric function decreases linearly with reduction in temperature. This result is in contrast with the commonly reported conclusion of infrared normal reflectance studies. If sustained it may clarify the problem of understanding the normal state properties of YBCO and the other cuprates. The dielectric function of the films, epsilon = epsilon(1) + i epsilon(2), was determined between room temperature and 80K: epsilon(1) was found to be only slightly temperature dependent but somewhat sample dependent, probably as a result of surface and grain boundary contamination. The imaginary part, epsilon(2), (and the real part of the conductivity, sigma(1),) decreased linearly with reduction in temperature in both films. Results obtained were: for film 1: epsilon(1) = - 14.05 - 0.0024T and epsilon(2) - 4.11 + 0.086T and for film 2: epsilon(1) = - 24.09 + 0.0013T and epsilon(2) = 7.66 + 0.067T where T is the temperature in Kelvin. An understanding of the results is offered in terms of temperature-dependent intrinsic intragrain inelastic scattering and temperature-independent contributions: elastic and inelastic grain boundary scattering and optical interband (or localised charge) absorption. The relative contribution of each is estimated. A key conclusion is that the interband (or localised charge) absorption is only similar to 10%. Most importantly, the intrinsic scattering rate, 1/tau, decreases linearly with fall in temperature, T, in a regime where current theory predicts dependence on frequency, omega, to dominate. The coupling constant, lambda, between the charge carriers and the thermal excitations has a value of 1.7, some fivefold greater than the far infrared value. These results imply a need to restate the phenomenology of the normal state of high temperature superconductors and seek a corresponding theoretical understanding.
Resumo:
The dielectric function of a YBCO film was determined at 3392nm at temperatures down to 80K. Results obtained were epsilon(i) = -24.09 - 0.0013T and epsilon(i) = 7.66 + 0.067T. The results for epsilon(i) are compared with the de resistance of the film. Intrinsic intragrain scattering, elastic and inelastic grain boundary scattering and optical interband absorption are estimated as 82%, 5%, 13% and 10% respecively at 0K.
Resumo:
The light output from nominally smooth Al-Ox-Au tunnel junctions is observed to be substantially independent of the deposition rate of the Au film electrode. Films deposited quickly (2 nm s-1) and those deposited slowly (0.16 nm s-1) have similar spectral dependences and intensities. (This is in contrast to roughened films where those deposited quickly give out less light, especially towards the blue end of the spectrum.) The behaviour can be interpreted in terms of the ratio l(ph)/l(em) where l(ph) and l(em) are the mean free paths of surface plasmons between external photon emissions and internal electromagnetic absorptions respectively. Once l(ph)/l(em) exceeds 100, as it does on smooth films, grain size has little further effect on the spectral shape of the light output. In fast-deposited films there are two compensating effects on the output intensity: grain boundary scattering decreases it and greater surface roughness increases it.
Resumo:
The recently discovered, high-temperature proton conductor, La0.99Sr0.01NbO4-δ, was used as a support for the electrochemical promotion of a platinum catalyst. Ethylene oxidation was used as a probe reaction in the temperature range 350-450 °C. Moderate non-Faradaic rate modification, attributable to a protonic promoting species, occurred under negative polarisation; some permanent promotion was also observed. In oxidative atmospheres, both the pO2 of the reaction mixture and the temperature influenced the type and magnitude of the observed rate modification. Rate-enhancement values of up to ρ = 1.4 and Faradaic-efficiency values approaching Λ = -100 were obtained. Promotion was observed under positive polarisation and relatively dry, oxygen-rich atmospheres suggesting that some oxygen ion conductivity may occur under these conditions. Impedance spectroscopy performed in atmospheres of 4 kPa O2/N2 and of 5 kPa H2/N2 under dry and slightly humidified (0.3 kPa H2O) conditions indicated that the electrical resistivity is heavily dominated by the grain-boundary response in the temperature range of the EPOC studies; much lower grain-boundary impedances in the wetter conditions are likely to be attributable to proton transport. © 2009 Elsevier B.V. All rights reserved.
Resumo:
The blocking of ion transport at interfaces strongly limits the performance of electrochemical nanodevices for energy applications. The barrier is believed to arise from space-charge regions generated by mobile ions by analogy to semiconductor junctions. Here we show that something different is at play by studying ion transport in a bicrystal of yttria (9% mol) stabilized zirconia (YSZ), an emblematic oxide ion conductor. Aberration-corrected scanning transmission electron microscopy (STEM) provides structure and composition at atomic resolution, with the sensitivity to directly reveal the oxygen ion profile. We find that Y segregates to the grain boundary at Zr sites, together with a depletion of oxygen that is confined to a small length scale of around 0.5 nm. Contrary to the main thesis of the space-charge model, there exists no evidence of a long-range O vacancy depletion layer. Combining ion transport measurements across a single grain boundary by nanoscale electrochemical strain microscopy (ESM), broadband dielectric spectroscopy measurements, and density functional calculations, we show that grain-boundary-induced electronic states act as acceptors, resulting in a negatively charged core. Ultimately, it is this negative charge which gives rise to the barrier for ion transport at the grain boundary
Resumo:
Title: Boundary-setting as a core activity in complex public systems
Authors: Joanne Murphy & Mary Lee Rhodes
The definition of the boundary of a system is at the core of any systems approach (Midgley 2000; 2003). By defining boundaries we enable – and delimit – the range of outcomes sought and the actions and resources that can be brought to bear. In complex adaptive systems (CAS) analysis, the conceptualisaion and definition of boundaries is particularly challenging as they are constantly undergoing redefinition through agent action, interaction and entry/exit. (Rhodes et al 2011). The concept of ‘boundaries’ appears regularly in a wide range of literature around public management, administration, geopolitics, regeneration and organisational development. Discussions around boundaries focus on many things from concrete physical manifestations and barriers, to virtual interfaces between one organisational unit and another, or even entirely theoretical demarcations between different schools of thought (Kaboolian, 1998, Levi-Faur, 2004, Agranoff & McGuire, 2004).
However, managing ‘beyond’ such boundaries is a routinely recurring aspiration that transcends sectors and local concerns. Unsurprisingly then, there is an increasing understanding of the need to acknowledge and manage such boundaries (whether they be physical, social or organisational) within public management as a discipline (Currie et al 2007, Fitzsimmons and White, 1997, Murtagh, 2002). This paper explores the impact of boundaries on public management strategic decision-making in the sectors of urban regeneration and healthcare. In particular, it focuses on demarcations to physical space, communal identity and within professional relationships in these sectors.
The first section describes the research that gave rise to the paper and the cases examined. Next we briefly define what we mean by boundaries. We explore issues that have emerged from our analysis of urban regeneration and health care singularly, before looking at how the concept of boundaries is a recurrent concern across the sectors. The main contribution of the paper is an exploration of how a CAS lens can bring a new insight into the concept of boundaries and decision-making in the two sets of case studies. This discussion will concentrate on initial conditions, bifurcation and adaptation as key CAS factors in relation to boundaries. We conclude with a brief discussion on the benefits of a CAS lens to an analysis of boundaries in public management decision-making.
References:
Agranoff, R. and McGuire, M. (2003) Collaborative Public Management: Strategies for Local Government. Washington, DC: Georgetown Univ. Press.
Currie, G., Lockett, A. (2007) “A critique of transformational leadership: moral, professional & contingent dimensions of leadership within public services organizations”. Human Relations 60: 341-370.
Fitzsimmons and White, (1997) "Crossing boundaries: communication between professional groups", Journal of Management in Medicine, Vol. 11 Iss: 2, pp.96 – 101
Kaboolian, L. (1998) “The New Public Management: Challenging the Boundaries of the Management vs. Administration Debate” Public Administration Review Vol. 58, No. 3 pp.189-193
Levi-Faur D. and Vigoda-Gadot Eran (eds) (2004) International Public Policy and Management: Policy Learning Beyond Regional, Cultural and Political Boundaries, Marcel Dekker,
Midgley, G. (ed) (2003) Systems Thinking. London: Sage Publications
Midgley, G. (2000) Systemic Intervention: Philosophy, Methodology and Practice. New York, NY: Kluwer.
Murtagh, B. (2002). The Politics of Territory: Policy and Segregation in Northern Ireland. Basingstoke, Palgrave.
Rhodes, ML, Joanne Murphy, Jenny Muir, John Murray (2011) Public Management & Complexity Theory: Richer Decision Making in Irish Public Services, UK: Routledge