Through-thickness control of polymer bioresorption via electron beam irradiation

Predicable and controlled degradation is not only central to the accurate delivery of bioactive agents and drugs, it also plays a vital role in key aspects of bone tissue engineering. The work addressed in this paper investigates the utilisation of e-beam irradiation in order to achieve a controlled (surface) degradation profile. This study focuses on the modification of commercially and clinically relevant materials, namely poly(L-lactic acid) (PLLA), poly(L-lactide-hydroxyapatite) (PLLA-HA), poly(L-lactide-glycolide) co-polymer (PLG) and poly(L-lactide-DL-lactide) co-polymer (PLDL). Samples were subjected to irradiation treatments using a 0.5 MeV electron beam with delivered surface doses of 150 and 500 kGy. In addition, an acrylic attenuation shield was used for selected samples to control the penetration of the e-beam. E-beam irradiation induced chain scission in all polymers, as characterized by reduced molecular weights and glass transition temperatures (T-g). Irradiation not only produced changes in the physical properties of the polymers but also had associated effects on surface erosion of the materials during hydrolytic degradation. Moreover, the extent to which both mechanical and hydrolytic degradation was observed is synonymous with the estimated penetration of the beam (as controlled by the employment of an attenuation shield). (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Control of the thickness of mesoporous titania films for application in multiphase catalytic microreactors

A new method of sol-gel polymer template synthesis of mesoporous catalytic thin films has been proposed which allows controlling the chemical nature of the film, the porosity, thickness and loading with an active species. The mesoporous films with a long-order structure can be obtained in a narrow range of surfactant-to-metal precursor molar ratios from 0.006 to 0.009. The catalytic film thickness was varied from 300 to 1000 nm while providing a uniform catalyst distribution with a desired catalyst loading (1 wt. % Au nanoparticles) throughout the film. The films were characterized by TEM, SEM, ethanol adsorption and contact angle measurements. The calcination of the as-synthesized films at 573 K reduced Ti4+ sites to Ti3+. A 300 nm thick Au-containing film showed an initial TOF of 1.4 s(-1) and a selectivity towards unsaturated alcohols as high as 90% in the hydrogenation of citral. Thicker films demonstrated a high selectivity towards the saturated aldehyde (above 55%) and a lower intrinsic catalytic activity (initial TOF of 0.7-0.9 s(-1)) in the absence of internal diffusion limitations.

Electron-beam treatment of poly(lactic acid) to control degradation profiles

Bioresorbable polymers such as polylactide (PIA) and polylactide-co-glycolide (PLGA) have been used successfully as biomaterials in a wide range of medical applications. However, their slow degradation rates and propensity to lose strength before mass have caused problems. A central challenge for the development of these materials is the assurance of consistent and predictable in vivo degradation. Previous work has illustrated the potential to influence polymer degradation using electron beam (e-beam) radiation. The work addressed in this paper investigates further the utilisation of e-beam radiation in order to achieve a more surface specific effect. Variation of e-beam energy was studied as a means to control the effective penetrative depth in poly-L-lactide (PLEA). PLEA samples were exposed to e-beam radiation at individual energies of 0.5 MeV, 0.75 MeV and 1.5 MeV. The near-surface region of the PLEA samples was shown to be affected by e-beam irradiation with induced changes in molecular weight, morphology, flexural strength and degradation profile. Moreover, the depth to which the physical properties of the polymer were affected is dependent on the beam energy used. Computer modelling of the transmission of each e-beam energy level used corresponded well with these findings. (C) 2010 Elsevier Ltd. All rights reserved.

Birth order and childhood type 1 diabetes risk: A pooled analysis of 31 observational studies

Background: The incidence rates of childhood onset type 1 diabetes are almost universally increasing across the globe but the aetiology of the disease remains largely unknown. We investigated whether birth order is associated with the risk of childhood diabetes by performing a pooled analysis of previous studies. Methods: Relevant studies published before January 2010 were identified from MEDLINE, Web of Science and EMBASE. Authors of studies provided individual patient data or conducted pre-specified analyses. Meta-analysis techniques were used to derive combined odds ratios (ORs), before and after adjustment for confounders, and investigate heterogeneity. Results: Data were available for 6 cohort and 25 case-control studies, including 11 955 cases of type 1 diabetes. Overall, there was no evidence of an association prior to adjustment for confounders. After adjustment for maternal age at birth and other confounders, a reduction in the risk of diabetes in second-or later born children became apparent [fully adjusted OR=0.90 95% confidence interval (CI) 0.83-0.98; P=0.02] but this association varied markedly between studies (I 2=67%). An a priori subgroup analysis showed that the association was stronger and more consistent in children <5years of age (n=25 studies, maternal age adjusted OR=0.84 95% CI 0.75, 0.93; I 2=23%). Conclusion: Although the association varied between studies, there was some evidence of a lower risk of childhood onset type 1 diabetes with increasing birth order, particularly in children aged <5 years. This finding could reflect increased exposure to infections in early life in later born children. Published by Oxford University Press on behalf of the International Epidemiological Association © The Author 2010; all rights reserved.

Strategies for adding features to CAD models in order to optimize performance

This paper presents an approach which enables new parameters to be added to a CAD model for optimization purposes. It aims to remove a common roadblock to CAD based optimization, where the parameterization of the model does not offer the shape sufficient flexibility for a truly optimized shape to be created. A technique has been developed which uses adjoint based sensitivity maps to predict
the sensitivity of performance to the addition to a model of four different feature types, allowing the feature providing the greatest benefit to be selected. The optimum position to add the feature is also discussed. It is anticipated that the approach could be used to iteratively add features to a model, providing greater flexibility to the shape of the model, and allowing the newly-added parameters to be used as design variables in a subsequent shape optimization.

Infection-control strategies for preventing the transmission of meticillin-resistant Staphylococcus aureus (MRSA) in nursing homes for older people (Review)

Background: Nursing homes for older people provide an environment likely to promote the acquisition and spread of meticillin-resistant Staphylococcus aureus (MRSA), putting residents at increased risk of colonisation and infection. It is recognised that infection control strategies are important in preventing and controlling MRSA transmission.

Objectives: The objective of this review was to determine the effects of infection control strategies for preventing the transmission of MRSA in nursing homes for older people.

Search strategy: We searched the Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library 2009, Issue 2), the Cochrane Wounds Group Specialised Register (searched May 29th, 2009). We also searched MEDLINE (from 1950 to May Week 4 2009), Ovid EMBASE (1980 to 2009 Week 21), EBSCO CINAHL (1982 to May Week 4 2009), British Nursing Index (1985 to May 2009), DARE (1992 to May 2009), Web of Science (1981 to May 2009), and the Health Technology Assessment (HTA) website (1988 to May 2009). Research in progress was sought through Current Clinical Trials (www.controlled-trials.com), Medical Research Council Research portfolio, and HSRPRoj (current USA projects). SIGLE was also searched in order to identify atypical material which was not accessible through more conventional sources.

Selection criteria: All randomised and controlled clinical trials, controlled before and after studies and interrupted time series studies of infection control interventions in nursing homes for older people were eligible for inclusion.

Data collection and analysis: Two authors independently reviewed the results of the searches.

Main results: Since no studies met the selection criteria, neither a meta-analysis nor a narrative description of studies was possible.

Authors' conclusions: The lack of studies in this field is surprising. Nursing homes for older people provide an environment likely to promote the acquisition and spread of infection, with observational studies repeatedly reporting that being a resident of a nursing home increases the risk of MRSA colonisation. Much of the evidence for recently-issued United Kingdom guidelines for the control and prevention of MRSA in health care facilities was generated in the acute care setting. It may not be possible to transfer such strategies directly to the nursing home environment, which serves as both a healthcare setting and a resident's home. Rigorous studies should be conducted in nursing homes, to test interventions that have been specifically designed for this unique environment.

Generation and control of ultrafast pulse trains for quasi-phase-matching high-harmonic generation

Two techniques are demonstrated to produce ultrashort pulse trains capable of quasi-phase-matching high-harmonic generation. The first technique makes use of an array of birefringent crystals and is shown to generate high-contrast pulse trains with constant pulse spacing. The second technique employs a grating-pair stretcher, a multiple-order wave plate, and a linear polarizer. Trains of up to 100 pulses are demonstrated with this technique, with almost constant inter-pulse separation. It is shown that arbitrary pulse separation can be achieved by introducing the appropriate dispersion. This principle is demonstrated by using an acousto-optic programmable dispersive filter to introduce third-and fourth-order dispersions leading to a linear and quadratic variation of the separation of pulses through the train. Chirped-pulse trains of this type may be used to quasi-phase-match high-harmonic generation in situations where the coherence length varies through the medium. (C) 2010 Optical Society of America

Improvement of the Performance of Hysteresis Compensation in SMA Actuators by Using Inverse Preisach Model in Closed – Loop Control System

The aim of this paper is to increase the performance of hysteresis compensation for Shape Memory Alloy (SMA) actuators by using inverse Preisach model in closed — loop control system. This is used to reduce hysteresis effects and improve accuracy for the displacement of SMA actuators. Firstly, hysteresis is identified by numerical Preisach model implementation. The geometrical interpretation from first order transition curves is used for hysteresis modeling. Secondly, the inverse Preisach model is formulated and incorporated in closed-loop PID control system in order to obtain desired current-to-displacement relationship with hysteresis reducing. The experimental results for hysteresis compensation by using this method are also shown in this paper.

RFID based Efficient Lighting Control

The Kyoto Protocol and the European Energy Performance of Buildings Directive put an onus on governments
and organisations to lower carbon footprint in order to contribute towards reducing global warming. A key
parameter to be considered in buildings towards energy and cost savings is its indoor lighting that has a major
impact on overall energy usage and Carbon Dioxide emissions. Lighting control in buildings using Passive
Infrared sensors is a reliable and well established approach; however, the use of only Passive Infrared does not
offer much savings towards reducing carbon, energy, and cost. Accurate occupancy monitoring information can
greatly affect a building’s lighting control strategy towards a greener usage. This paper presents an approach for
data fusion of Passive Infrared sensors and passive Radio Frequency Identification (RFID) based occupancy
monitoring. The idea is to have efficient, need-based, and reliable control of lighting towards a green indoor
environment, all while considering visual comfort of occupants. The proposed approach provides an estimated
13% electrical energy savings in one open-plan office of a University building in one working day. Practical
implementation of RFID gateways provide real-world occupancy profiling data to be fused with Passive
Infrared sensing towards analysis and improvement of building lighting usage and control.

White matter fractional anisotrophy predicts balance performance in older adults

Aging is characterized by brain structural changes that may compromise motor functions. In the context of postural control, white matter integrity is crucial for the efficient transfer of visual, proprioceptive and vestibular feedback in the brain. To determine the role of age-related white matter decline as a function of the sensory feedback necessary to correct posture, we acquired diffusion weighted images in young and old subjects. A force platform was used to measure changes in body posture under conditions of compromised proprioceptive and/or visual feedback. In the young group, no significant brain structure-balance relations were found. In the elderly however, the integrity of a cluster in the frontal forceps explained 21% of the variance in postural control when proprioceptive information was compromised. Additionally, when only the vestibular system supplied reliable information, the occipital forceps was the best predictor of balance performance (42%). Age-related white matter decline may thus be predictive of balance performance in the elderly when sensory systems start to degrade.

The Utility of Fractional Exhaled Nitric Oxide Suppression in the Identification of Nonadherence in Difficult Asthma

Rationale: Nonadherence to inhaled corticosteroid therapy (ICS) is a major contributor to poor control in difficult asthma, yet it is challenging to ascertain. Objectives: Identify a test for nonadherence using fractional exhaled nitric oxide (FENO) suppression after directly observed inhaled corticosteroid (DOICS) treatment. Methods: Difficult asthma patients with an elevated FENO (>45 ppb) were recruited as adherent (ICS prescription filling >80%) or nonadherent (filling <50%). They received 7 days of DOICS (budesonide 1,600 µg) and a test for nonadherence based on changes in FENO was developed. Using this test, clinic patients were prospectively classified as adherent or nonadherent and this was then validated against prescription filling records, prednisolone assay, and concordance interview. Measurements and Main Results: After 7 days of DOICS nonadherent (n = 9) compared with adherent subjects (n = 13) had a greater reduction in FENO to 47 ± 21% versus 79 ± 26% of baseline measurement (P = 0.003), which was also evident after 5 days (P = 0.02) and a FENO test for nonadherence (area under the curve = 0.86; 95% confidence interval, 0.68-1.00) was defined. Prospective validation in 40 subjects found the test identified 13 as nonadherent; eight confirmed nonadherence during interview (three of whom had excellent prescription filling but did not take medication), five denied nonadherence, two had poor inhaler technique (unintentional nonadherence), and one also denied nonadherence to prednisolone despite nonadherent blood level. Twenty-seven participants were adherent on testing, which was confirmed in 21. Five admitted poor ICS adherence but of these, four were adherent with oral steroids and one with omalizumab. Conclusions: FENO suppression after DOICS provides an objective test to distinguish adherent from nonadherent patients with difficult asthma. Clinical trial registered with www.clinicaltrials.gov (NCT 01219036). Copyright © 2012 by the American Thoracic Society.

The two-way relationship between the Balanced Scorecard and Management Control Systems in organizations:Lessons from a Case Study

This paper reports a case study conducted in Quinta da Aveleda, one of
the three largest Portuguese wine companies. Our aim was to explore the
relationship established between a newly implemented Balanced Scorecard
(BSC) and the elements of the Management Control System (MCS) in the
organization. Thus, two specific objectives were pursued. Firstly, to identify
the influences (barriers, opportunities) of the existing MCS on the implementation
of the BSC. Secondly, to identify the impacts the BSC implementation
was able to exert on the configuration of the organization’s MCS.
We found that the budgeting process, the planning system, the information
infrastructure, and the organizational structure and culture were the elements
of the previous MCS that influenced the BSC implementation process.
Eventually, the BSC implementation led to important changes in the budgeting,
planning, reporting systems and processes. In order to explain these
findings, we briefly explored the main issues and factors accounting for the
scope and nature of the BSC’s impacts on Quinta da Aveleda. These issues
and factors were the mobilized organizational resources, the implementation
approach, the communication, and the organizational support.

A qualitative study of psychological, social and behavioral barriers to appropriate food portion size control

Background: Given the worldwide prevalence of overweight and obesity, there is a clear need for meaningful practical healthy eating advice - not only in relation to food choice, but also on appropriate food portion sizes. As the majority of portion size research to date has been overwhelmingly quantitative in design, there is a clear need to qualitatively explore consumers’ views in order to fully understand how food portion size decisions are made. Using qualitative methodology this present study aimed to explore consumers’ views about factors influencing their portion size selection and consumption and to identify barriers to appropriate portion size control.

Methods: Ten focus groups with four to nine participants in each were formed with a total of 66 persons (aged 19–64 years) living on the island of Ireland. The semi-structured discussions elicited participants’ perceptions of suggested serving size guidance and explored the influence of personal, social and environmental factors on their food portion size consumption. Audiotapes of the discussions were professionally transcribed verbatim, loaded into NVivo 9, and analysed using an inductive thematic analysis procedure.
Results: The rich descriptive data derived from participants highlight that unhealthy portion size behaviors emanate from various psychological, social and behavioral factors. These bypass reflective and deliberative control, and converge to constitute significant barriers to healthy portion size control. Seven significant barriers to healthy portion size control were apparent: (1) lack of clarity and irrelevance of suggested serving size guidance; (2) guiltless eating; (3) lack of self-control over food cues; (4) distracted eating; (5) social pressures; (6) emotional eating rewards;
and (7) quantification habits ingrained from childhood.

Conclusions: Portion size control strategies should empower consumers to overcome these effects so that the consumption of appropriate food portion sizes becomes automatic and habitual.
Keywords: Food portion size, Barriers, Obesity, Consumers, Qualitative study. © 2013 Spence et al.; licensee BioMed Central Ltd

Entanglement control in hybrid optomechanical systems

We demonstrate the control of entanglement in a hybrid optomechanical system comprising an optical cavity with a mechanical end-mirror and an intracavity Bose-Einstein condensate. Pulsed laser light (tuned within realistic experimental conditions) is shown to induce an almost sixfold increase of the atom-mirror entanglement and to be responsible for interesting dynamics between such mesoscopic systems. In order to assess the advantages offered by the proposed control technique, we compare the time-dependent dynamics of the system under constant pumping with the evolution due to the modulated laser light.

Capability Curve Based Enhanced Reactive Power Control Strategy for Stability Enhancement and Network Voltage Management

Reactive power has become a vital resource in modern electricity networks due to increased penetration of distributed generation. This paper examines the extended reactive power capability of DFIGs to improve network stability and capability to manage network voltage profile during transient faults and dynamic operating conditions. A coordinated reactive power controller is designed by considering the reactive power capabilities of the rotor-side converter (RSC) and the grid-side converter (GSC) of the DFIG in order to maximise the reactive power support from DFIGs. The study has illustrated that, a significant reactive power contribution can be obtained from partially loaded DFIG wind farms for stability enhancement by using the proposed capability curve based reactive power controller; hence DFIG wind farms can function as vital dynamic reactive power resources for power utilities without commissioning additional dynamic reactive power devices. Several network adaptive droop control schemes are also proposed for network voltage management and their performance has been investigated during variable wind conditions. Furthermore, the influence of reactive power capability on network adaptive droop control strategies has been investigated and it has also been shown that enhanced reactive power capability of DFIGs can substantially improve the voltage control performance.