Climatic signals in the life histories of insects:the distribution and abundance of heather psyllids (Strophingia spp.) in the UK

1. The population density and age structure of two species of heather psyllid Strophingia ericae and Strophingia cinereae, feeding on Calluna vulgaris and Erica cinerea, respectively, were sampled using standardized methods at locations throughout Britain. Locations were chosen to represent the full latitudinal and altitudinal range of the host plants.

2. The paper explains how spatial variation in thermal environment, insect life-history characteristics and physiology, and plant distribution, interact to provide the mechanisms that determine the range and abundance of Strophingia spp.

3. Strophingia ericae and S. cinereae, despite the similarity in the spatial distribution patterns of their host plants within Britain, display strongly contrasting geographical ranges and corresponding life-history strategies. Strophingia ericae is found on its host plant throughout Britain but S. cinereae is restricted to low elevation sites south of the Mersey-Humber line and occupies only part of the latitudinal and altitudinal range of its host plant. There is no evidence to suggest that S. ericae has reached its potential altitudinal or latitudinal limit in the UK, even though its host plant appears to reach its altitudinal limit.

4. There was little difference in the ability of the two Strophingia spp. to survive shortterm exposure to temperatures as low as - 15 degrees C and low winter temperatures probably do not limit distribution in S. cinereae.

5. Population density of S. ericae was not related to altitude but showed a weak correlation with latitude. The spread of larval instars present at a site, measured as an index of instar homogeneity, was significantly correlated with a range of temperature related variables, of which May mean temperature and length of growing season above 3 degrees C (calculated using the Lennon and Turner climatic model) were the most significant. Factor analysis did not improve the level of correlation significantly above those obtained for single climatic variables. The data confirmed that S. ericae has a I year life cycle at the lowest elevations and a 2 year life cycle at the higher elevations. However, there was no evidence, as previously suggested, for an abrupt change from a one to a 2 year life cycle in S. ericae with increasing altitudes or latitudes.

6. By contrast with S. ericae, S. cinereae had an obligatory 1 year life cycle, its population decreased with altitude and the index of instar homogeneity showed little correlation with single temperature variables. Moreover, it occupied only part of the range of its host plant and its spatial distribution in the UK could be predicted with 96% accuracy using selected variables in discriminant analysis.

7. The life histories of the congeneric heather psyllids reflect adaptations that allow them to exploit host plants with different distributions in climatic and thereby geographical space. Strophingia ericae has the flexible life history that enables it to exploit C. vulgaris throughout its European boreal temperate range. Strophingia cinereae has a less flexible life history and is adapted for living on an oceanic temperate host. While the geographic ranges of the two Strophingia spp. overlap within the UK, the psyllids appear to respond differently to variation in their thermal environment.

The adaptations of a quality of life questionnaire for routine use in clinical practice: the Chronic Respiratory Disease Questionnaire in Cystic Fibrosis.

The assessment of quality of life (QOL) is necessary to monitor the course of disease and to assess the effect of new and existing interventions in clinical practice. This will only be achieved if QOL can be measured accurately and routinely. The aim of this study was to demonstrate the methodology involved in the adaptation and shortening of the Chronic Respiratory Disease Questionnaire (CRDQ) in a population of adults with cystic fibrosis (CF). A single interviewer administered the CRDQ to a sample of 45 adult patients (32 males) with CF prior to assessment of spirometric measures of lung function. Those patients whose lung function was stable at the time of study, and who could attend for a retest within 14 days, were asked to complete the questionnaire at a subsequent visit (n=10). The average interval between visits was 7 days (range 5-14 days). Correlations between spirometry and CRDQ dimensions ranged from -0.003 to 0.426. The fatigue, emotion and mastery dimensions showed high internal consistency, and adequate construct validity. In the small number of patients suitable for retest, the results indicated that the dimensions exhibited adequate test retest reliability. In contrast low internal consistency was demonstrated for the dyspnoea dimension. The fatigue, emotion and mastery dimensions could be reduced, in terms of their number of items without a substantial loss in explanatory power. This study suggests that QOL measurement can be made convenient, and so more easily accessible for routine clinical assessment.

A meta-analysis of latitudinal variations in life-history traits of roach, Rutilus rutilus, over its geographical range: linear or non-linear relationships?

1. We collated information from the literature on life history traits of the roach (a generalist freshwater fish), and analysed variation in absolute fecundity, von Bertalanffy parameters, and reproductive lifespan in relation to latitude, using both linear and non-linear regression models. We hypothesized that because most life history traits are dependent on growth rate, and growth rate is non-linearly related with temperature, it was likely that when analysed over the whole distribution range of roach, variation in key life history traits would show non-linear patterns with latitude.

Measuring health-related quality of life after stroke: A brief tool.

Routine assessment of health-related quality of life (HRQoL) can be time consuming and burdensome for a person with stroke. Therefore the aim of this study was to develop and test a brief instrument for assessing HRQoL among people with stroke. The Quality of Life after Stroke Scale (QLASS) was constructed from items within the Quality of Life Index-Stroke Version and the Chronic Respiratory Disease Questionnaire. It was administered to 92 people with stroke at three points in time: immediately after discharge from hospital, 6 months and 12 months later. Results suggest that the QLASS has 19 items which represent three factors: emotional functioning, mastery and fatigue which correlate with valid measures of health status and activities of daily living. The QLASS is proposed as a brief, valid HRQoL tool for use among people with stroke.

Life history of the rare red alga Tsengia bairdii (=Platoma bairdii) (Nemastomataceae, Rhodophyta) from Scotland

A single thallus of the rare red seaweed Tsengia bairdii (Farlow) K. Fan et Y.Fan( Platoma bairdii (Farlow) Kuckuck) (Nemastomataceae) was collected on a subtidal pebble on the west coast of Scotland. The terete gelatinous axes, which were only 7 mm high, were monoecious. They bore numerous cystocarps and a few spermatangia, which represent the first observation of male structures in this genus. Released carpospores grew into expanded basal discs that gave rise to erect axes bearing irregularly cruciate tetrasporangia. irregularly cruciate to zonate tetrasporangia were also formed on these basal discs. Karyological studies on dividing tetrasporocytes showed about 25 bodies, identified as paired meiotic chromosomes on the basis of their size in comparison to mitotic and meiotic chromosomes in other red algal species. These observations confirm the isomorphic life history inferred from early field collections and show that this species is monoecious. Tsengia bairdii is an extremely rare seaweed in Europe - it seems to be confined to sublittoral cobbles and has a temporally patchy distribution.

Predicting die life from die temperature for high pressure dies casting

The objective of this research was to determine the surface temperature of a high pressure die casting die during casting conditions. This was achieved by instrumentation of an insert which was placed in the shotplate region of the die. This research overcame the challenge of directly measuring the die surface temperature during a HPDC production casting cycle and shows that this is an effective method to determine the die surface temperature during the casting cycle. The instrumentation results gave a peak and minimum temperature of 500 C and 240 C respectively during steady state running conditions with a molten aluminium casting temperature of 660 C. Stress analysis from the steady state measured temperature of the die surface was calculated through a simple FEA model and the resulting stress uctuation was applied to a fatigue equation for the die material, the predicted number of cycles for cracking to start was found to correlate well with observed die damage.

Thermal fatigue analysis of solar panel structure for micro-satellite applications

Thermal fatigue analysis based on 2D finite difference and 3D finite element methods is carried out to study the performance of solar panel structure during micro-satellite life time. Solar panel primary structure consists of honeycomb structure and composite laminates. The 2D finite difference (I-DEAS) model yields predictions of the temperature profile during one orbit. Then, 3D finite element analysis (ANSYS) is applied to predict thermal fatigue damage of solar panel structure. Meshing the whole structure with 2D multi-layer shell elements with sandwich option is not efficient, as it misses thermal response of the honeycomb structure. So we applied a mixed approach between 3D solid and 2D shell elements to model the solar panel structure without the sandwich option.

Mapping stone surface temperature fluctuations: Implications for lichen distribution and biomodification on historic stone surfaces

The exposure of historic stone to processes of lichen-induced surface biomodification is determined, first and foremost, by the bioreceptivity of those surfaces to lichen colonization. As an important component of surface bioreceptivity, spatiotemporal variation in stone surface temperature plays a critical role in the spatial distribution of saxicolous lichen on historic stone structures, especially within seasonally hot environments. The ornate limestone and tufa stairwell of the Monastery of Cartuja (1516), Granada, Spain, exhibits significant aspect-related differences in lichen distribution. Lichen coverage and
diurnal fluctuations in stone surface temperature on the stairwell were monitored and mapped, under anticyclonic conditions in summer and winter, using an infrared thermometer and Geographical Information Systems approach. This research suggests that it is not extreme high surface temperatures that
determine the presence or absence of lichen coverage on stonework. Instead, average stone surface temperatures
over the course of the year seem to play a critical role in determining whether or not surfaces are receptive to lichen colonization and subsequent biomodification. It is inferred that lichen, capable of surviving extreme surface temperatures during the Mediterranean summer in an ametabolic state, require a respite period of lower temperatures within which they can metabolize, grow and reproduce.
The higher the average annual temperature a surface experiences, the shorter the respite period for any lichen potentially inhabiting that surface. A critical average temperature threshold of approximately 21 ?C has been identified on the stairwell, with average stone surface temperatures greater than this
generally inhibiting lichen colonization. A brief visual condition assessment between lichen-covered and lichen-free surfaces on the limestone sections of the stairwell suggests relative bioprotection induced by lichen coverage, with stonework quality and sharpness remaining more defined beneath lichen-covered surfaces. The methodology employed in this paper may have further applications in the monitoring and mapping of thermal stress fatigue on historic building materials.

Understanding the socio-economic distribution of multiple deprivation: An application of self-organising maps

In this paper we seek to contribute to recent efforts to develop and implement multi-dimensional approaches to social exclusion by applying self-organising maps (SOMs) to a set of material deprivation indicators from the Irish component of EU-SILC. The first stage of our analysis involves the identification of sixteen clusters that confirm the multi-dimensional nature of deprivation in contemporary Ireland and the limitations of focusing solely on income. In going beyond this mapping stage, we consider both patterns of socio-economic differentiation in relation to cluster membership and the extent to which such membership contributes to our understanding of economic stress. Our analysis makes clear the continuing importance of traditional forms of stratification relating to factors such as income, social class and housing tenure in accounting for patterns of multiple deprivation. However, it also confirms the role of acute life events and life cycle and location influences. Most importantly, it demonstrates that conclusions relating to the relative impact of different kinds of socio-economic influences are highly dependent on the form of deprivation being considered. Our analysis suggests that debates relating to the extent to which poverty and social exclusion have become individualized should take particular care to distinguish between different kinds of outcomes. Further analysis demonstrates that the SOM approach is considerably more successful than a comparable latent class analysis in identifying those exposed to subjective economic stress. (C) 2010 International Sociological Association Research Committee 28 on Social Stratification and Mobility. Published by Elsevier Ltd. All rights reserved.

Caregiving at the end of life:perspectives from spousal caregivers and care recipients.

OBJECTIVE: The purpose of this study is to examine the perspectives of both the spousal caregiver and care recipient on the caregiving experience in home-based palliative care. METHODS: A qualitative research strategy involving home-based face-to-face interviews with older palliative care patients and their spousal caregivers was used to examine the caregiving experience. RESULTS: Ten spousal caregivers and care recipient dyads participated in the study. Most informal caregivers viewed caregiving as an extension of the family relationship where caregiving responsibilities evolved over time. Spousal caregivers identified many negative reactions to caregiving, such as fatigue or weariness, depression, anger and sadness, financial stresses, and lack of time. Care recipients acknowledged the emotional and financial strain and expressed concern for their spouses. Both caregivers and care recipients were appreciative of home care services although they identified the need for additional services. They also identified difficulties in communication with formal providers and poor coordination of care among the various services. Both caregivers and care recipients disclosed some challenges with informal supports, but on the whole felt that their presence was positive. Additional positive aspects of caregiving reported by spouses included strengthened relationship with their spouse and discovering emotional strength and physical abilities in managing care. SIGNIFICANCE OF RESULTS: Health care and social service professionals need to recognize and understand both caregiver and care recipient perspectives if they are to successfully meet the needs of both members of the dyad.

Reconsidering Resource Rights: The Case for a Basic Right to the Benefits of Life-Sustaining Ecosystem Services

In the presence of anthropogenic climate change, gross environmental degradation, and mass abject poverty, many political theorists currently debate issues such as people's right to water, the right to food, and the distribution of rights to natural resources more generally. However, thus far many theorists either focus (somewhat arbitrarily) only on one particular resource (e.g. water) or they treat all natural resources alike, meaning that many relevant distinctions within the group of natural resources are overlooked. Hence, the paper will start with an analysis of the various forms which natural resources can take and how this might influence one's conception of resource rights. In so doing, the paper argues that we have to carefully distinguish between the actual physical resources people might control and how we distribute these, and the life-sustaining benefits each and every person draws from sustainable and functioning ecosystems. Based on this distinction, the paper will argue for a right to the benefits of life-sustaining ecosystem services as a universal basic right every person has. Further distributive claims with respect to particular physical resources would thus be limited by the requirements of such a basic right.

Lung stereotactic body radiation therapy (SBRT) delivered over 4 or 11days: A comparison of acute toxicity and quality of life.

Abstract
PURPOSE:
The optimal duration over which lung SBRT should be delivered is unknown. We conducted a randomized pilot study in patients treated with four fractions of lung SBRT delivered over 4 or over 11days.
METHODS:
Patients with a peripheral solitary lung tumor (NSCLC or pulmonary metastasis) ?5cm were eligible. For NSCLC lung tumors ?3cm, a dose of 48Gy in 4 fractions was used, otherwise 52Gy in 4 fractions was delivered. Patients were randomized to receive treatment over 4 consecutive days or over 11days. The primary end-point was acute grade ?2 toxicity. Secondary end-points included quality of life (QOL) assessed using the EORTC QLQ-C30 and QLQ-LC13 questionnaires.
RESULTS:
Fifty four patients were enrolled. More patients in the 11day group had respiratory symptoms at baseline. 55.6% patients treated over 4days and 33.3% of patients treated over 11days experienced acute grade ?2 toxicity (p=0.085). Dyspnea, fatigue and coughing domains were worse in the 11day group at baseline. At 1 and 4months, more patients in the 4day group experienced a clinically meaningful worsening in the dyspnea QOL domain compared to the 11day group (44.5% vs 15.4%, p=0.02; 38.5% vs 12.0%, p=0.03, respectively). However, raw QOL scores were not different at these time-points between treatment groups.
CONCLUSIONS:
Grade 2 or higher acute toxicity was more common in the 4day group, approaching statistical significance. More patients treated on 4 consecutive days reported a clinically meaningful increase in dyspnea, although interpretation of these results is challenging due to baseline imbalance between treatment groups. Larger studies are required to validate these results.

Influence of test methodology and probe geometry on nanoscale fatigue mechanisms of diamond-like carbon thin film

The aim of this paper is to investigate the mechanism of nanoscale fatigue using nano-impact and multiple-loading cycle nanoindentation tests, and compare it to previously reported findings of nanoscale fatigue using integrated stiffness and depth sensing approach. Two different film loading mechanism, loading history and indenter shapes are compared to comprehend the influence of test methodology on the nanoscale fatigue failure mechanisms of DLC film. An amorphous 100 nm thick DLC film was deposited on a 500 μm silicon substrate using sputtering of graphite target in pure argon atmosphere. Nano-impact and multiple-load cycle indentations were performed in the load range of 100 μN to 1000 μN and 0.1 mN to 100 mN, respectively. Both test types were conducted using conical and Berkovich indenters. Results indicate that for the case of conical indenter, the combination of nano-impact and multiple-loading cycle nanoindentation tests provide information on the life and failure mechanism of DLC film, which is comparable to the previously reported findings using the integrated stiffness and depth sensing approach. However, the comparison of results is sensitive to the applied load, loading mechanism, test-type and probe geometry. The loading mechanism and load history is therefore critical which also leads to two different definitions of film failure. The choice of exact test methodology, load and probe geometry should therefore be dictated by the in-service tribological conditions, and where necessary both test methodologies can be used to provide better insights of failure mechanism. Molecular dynamics (MD) simulations of the elastic response of nanoindentation is reported, which indicates that the elastic modulus of the film measured using MD simulation was higher than that experimentally measured. This difference is attributed to the factors related to the presence of material defects, crystal structure, residual stress, indenter geometry and loading/unloading rate differences between the MD and experimental results.

Integrating allowable design strains in composites with whole life value

Fibre-Reinforced Plastics (FRPs) have been used in civil aerospace vehicles for decades. The current state-of-the-art in airframe design and manufacture results in approximately half the airframe mass attributable to FRP materials. The continual increase in the use of FRP materials over metallic alloys is attributable to the material's superior specific strength and stiffness, fatigue performance and corrosion resistance. However, the full potential of these materials has yet to be exploited as analysis methods to predict physical failure with equal accuracy and robustness are not yet available. The result is a conservative approach to design, but one that can bring benefit via increased inspection intervals and reduced cost over the vehicle life. The challenge is that the methods used in practice are based on empirical tests and real relationships and drivers are difficult to see in this complex process and so the trade-off decision is challenging and uncertain. The aim of this feasibility study was to scope a viable process which could help develop some rules and relationships based on the fundamental mechanics of composite material and the economics of production and operation, which would enhance understanding of the role and impact of design allowables across the life of a composite structure.

Wear analysis and prediction of the life of a riveting die used in the automotive industry

Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.