Confined site construction: An empirical analysis of factors impacting health and safety management

Purpose – The purpose of this paper is to identify, clarify and tabulate the various managerial issues encountered, to aid in the management of the complex health and safety concerns which occur within a confined construction site environment.

Design/methodology/approach – This is achieved through conducting extensive qualitative and qualitative research in the form of case studies, interviews and questionnaire survey.

Findings – The leading managerial issues in the management of health and safety on a confined construction site are found to be: “Difficulty to move materials around site safely”; “Lack of adequate room for the effective handling of materials”; “Difficulty in ensuring site is tidy and all plant and materials are stored safely”; “Close proximity of individuals to operation of large plant and machinery”; and joint fifth “Difficulty in ensuring proper arrangement and collection of waste materials on-site” along with “Difficulty in controlling hazardous materials and equipment on site”.

Practical implications – The resulting implication for practice of these results can be summarised by identifying that with sustained development of urban centres on a global scale, coupled with the increasing complexity of architectural designs, the majority of on-site project management professionals are faced with the onerous task of completing often intricate designs within a limited spatial environment, under strict health and safety parameters.

Originality/value – The subsequent value of the findings are such that just as on-site management professionals successfully identify the various managerial issues highlighted, the successful management of health and safety on a confined construction site is attainable.

Polysaccharide co-polymerases:the enigmatic conductors of the O-antigen assembly orchestra

The O-antigen lipopolysaccharides on bacterial surface contain variable number of oligosaccharide repeat units with their length having a modal distribution specific to the bacterial strain. The polysaccharide length distribution is controlled by the proteins called polysaccharide co-polymerases (PCPs), which are embedded in the inner membrane in Gram-negative bacteria and form homo oligomers. The 3D structures of periplasmic domains of several PCPs have been determined and provided the first insights into the possible mechanism of polysaccharide length determination mechanism. Here we review the current knowledge of structure and function of these polysaccharide length regulators.

Shifting Ground:Beyond National Architecture

The Irish Pavilion at the Venice Architecture Biennale 2012 charts a position for Irish architecture in a global culture where the modes of production of architecture are radically altered. Ireland is one of the most globalised countries in the world, yet it has developed a national culture of architecture derived from local place as a material construct. We now have to evolve our understanding in the light of the globalised nature of economic processes and architectural production which is largely dependent on internationally networked flows of products, data, and knowledge. We have just begun to represent this situation to ourselves and others. How should a global architecture be grounded culturally and philosophically? How does it position itself outside of shared national reference points?
heneghan peng architects were selected as participants because they are working across three continents on a range of competition-winning projects. Several of these are in sensitive and/or symbolic sites that include three UNESCO World Heritage sites, including the Grand Egyptian Museum in Cairo, the Giants Causeway Visitor Centre in Northern Ireland, and the new Rhine Bridge near Lorelei.
Our dialogue led us to discussing the universal languages of projective geometry and number are been shared by architects and related professionals. In the work of heneghan peng, the specific embodiment of these geometries is carefully calibrated by the choice of materials and the detailed design of their physical performance on site. The stone facade of the Giant’s Causeway Visitor Centre takes precise measure of the properties of the volcanic basalt seams from which it is hewn. The extraction of the stone is the subject of the pavilion wall drawings which record the cutting of stones to create the façade of the causeway centre.
We also identified water as an element which is shared across the different sites. Venice is a perfect place to take measure of this element which suggests links to another site – the Nile Valley which was enriched by the annual flooding of the River Nile. An ancient Egyptian rod for measuring the water level of the Nile inspired the design of the Nilometre - a responsive oscillating bench that invites visitors to balance their respective weights. This action embodies the ways of thinking that are evolving to operate in the globalised world, where the autonomous architectural object is dissolving into an expanded field of conceptual rules and systems. The bench constitutes a shifting ground located in the unstable field of Venice. It is about measurement and calibration of the weight of the body in relation to other bodies; in relation to the site of the installation; and in relation to water. The exhibit is located in the Artiglierie section of the Arsenale. Its level is calibrated against the mark of the acqua alta in the adjacent brickwork of the building which embodies a liminal moment in the fluctuating level of the lagoon.
The weights of bodies, the level of water, changes over time, are constant aspects of design across cultures and collectively they constitute a common ground for architecture - a ground shared with other design professionals. The movement of the bench required complex engineering design and active collaboration between the architects, engineers and fabricators. It is a kind of prototype – a physical object produced from digital data that explores the mathematics at play – the see-saw motion invites the observer to become a participant, to give it a test drive. It shows how a simple principle can generate complex effects that are difficult to predict and invites visitors to experiment and play with them.

Irish Timber – Characterisation, Potential and Innovation

In order to increase the utilisation of Irish timber in construction and novel engineered wood products, the mechanical and physical properties of the material must be established. For timber products used for structural applications, the fundamental properties are the modulus of elasticity, bending strength, density and dimensional stability, as these define the structural grade of the material. In order to develop engineering design models for applications such as reinforced timber, knowledge of the nonlinear stress-strain behaviour in compression is also required.
The paper presents the programme and results of an ongoing research project ‘Innovation in Irish Timber Usage’ which focuses on the characterisation of Sitka spruce as it is the most widely grown species in Ireland. In the past, a number of studies have been conducted to determine the properties of Irish-grown Sitka spruce. Nevertheless, due to the changes that have taken place in silvicultural practices since the publication of these studies, there is a need to determine how these properties have changed. This paper presents the data gathered from historical studies together with the results of an extensive test programme undertaken to characterise the properties of the present resource.
Moreover, the study preliminary examines the potential use of Irish grown Sitka spruce in novel timber products. Construction applications, such as fibre-reinforced polymer reinforced timber elements and connections, and cross-laminated timber are investigated.

Virtual Reality: immersed in the structural world

Virtual reality is a rapidly emerging technology, driven by the computer gaming industry. The maturity of the concept, combined with modern hardware, is delivering an experience which offers a useful commercial tool for industry and educators. This article discusses the uses of virtual reality within structural engineering and provides an understanding of how it can be incorporated easily and efficiently for design purposes and beyond.

Parametric CAD model based shape optimization using adjoint functions

Adjoint methods have proven to be an efficient way of calculating the gradient of an objective function with respect to a shape parameter for optimisation, with a computational cost nearly independent of the number of the design variables [1]. The approach in this paper links the adjoint surface sensitivities (gradient of objective function with respect to the surface movement) with the parametric design velocities (movement of the surface due to a CAD parameter perturbation) in order to compute the gradient of the objective function with respect to CAD variables.
For a successful implementation of shape optimization strategies in practical industrial cases, the choice of design variables or parameterisation scheme used for the model to be optimized plays a vital role. Where the goal is to base the optimization on a CAD model the choices are to use a NURBS geometry generated from CAD modelling software, where the position of the NURBS control points are the optimisation variables [2] or to use the feature based CAD model with all of the construction history to preserve the design intent [3]. The main advantage of using the feature based model is that the optimized model produced can be directly used for the downstream applications including manufacturing and process planning.
This paper presents an approach for optimization based on the feature based CAD model, which uses CAD parameters defining the features in the model geometry as the design variables. In order to capture the CAD surface movement with respect to the change in design variable, the “Parametric Design Velocity” is calculated, which is defined as the movement of the CAD model boundary in the normal direction due to a change in the parameter value.
The approach presented here for calculating the design velocities represents an advancement in terms of capability and robustness of that described by Robinson et al. [3]. The process can be easily integrated to most industrial optimisation workflows and is immune to the topology and labelling issues highlighted by other CAD based optimisation processes. It considers every continuous (“real value”) parameter type as an optimisation variable, and it can be adapted to work with any CAD modelling software, as long as it has an API which provides access to the values of the parameters which control the model shape and allows the model geometry to be exported. To calculate the movement of the boundary the methodology employs finite differences on the shape of the 3D CAD models before and after the parameter perturbation. The implementation procedure includes calculating the geometrical movement along a normal direction between two discrete representations of the original and perturbed geometry respectively. Parametric design velocities can then be directly linked with adjoint surface sensitivities to extract the gradients to use in a gradient-based optimization algorithm.
The optimisation of a flow optimisation problem is presented, in which the power dissipation of the flow in an automotive air duct is to be reduced by changing the parameters of the CAD geometry created in CATIA V5. The flow sensitivities are computed with the continuous adjoint method for a laminar and turbulent flow [4] and are combined with the parametric design velocities to compute the cost function gradients. A line-search algorithm is then used to update the design variables and proceed further with optimisation process.