Spontaneous nucleation of structural defects in inhomogeneous ion chains

Structural defects in ion crystals can be formed during a linear quench of the transverse trapping frequency across the mechanical instability from a linear chain to a zigzag structure. The density of defects after the sweep can be conveniently described by the Kibble-Zurek mechanism (KZM). In particular, the number of kinks in the zigzag ordering can be derived from a time-dependent Ginzburg-Landau equation for the order parameter, here the zigzag transverse size, under the assumption that the ions are continuously laser cooled. In a linear Paul trap, the transition becomes inhomogeneous, since the charge density is larger in the center and more rarefied at the edges. During the linear quench, the mechanical instability is first crossed in the center of the chain, and a front, at which the mechanical instability is crossed during the quench, is identified that propagates along the chain from the center to the edges. If the velocity of this front is smaller than the sound velocity, the dynamics become adiabatic even in the thermodynamic limit and no defect is produced. Otherwise, the nucleation of kinks is reduced with respect to the case in which the charges are homogeneously distributed, leading to a new scaling of the density of kinks with the quenching rate. The analytical predictions are verified numerically by integrating the Langevin equations of motion of the ions, in the presence of a time-dependent transverse confinement. We argue that the non-equilibrium dynamics of an ion chain in a Paul trap constitutes an ideal scenario to test the inhomogeneous extension of the KZM, which lacks experimental evidence to date.

Structural Defects in Ion Chains by Quenching the External Potential: The Inhomogeneous Kibble-Zurek Mechanism

The nonequilibrium dynamics of an ion chain in a highly anisotropic trap is studied when the transverse trap frequency is quenched across the value at which the chain undergoes a continuous phase transition from a linear to a zigzag structure. Within Landau theory, an equation for the order parameter, corresponding to the transverse size of the zigzag structure, is determined when the vibrational motion is damped via laser cooling. The number of structural defects produced during a linear quench of the transverse trapping frequency is predicted and verified numerically. It is shown to obey the scaling predicted by the Kibble-Zurek mechanism, when extended to take into account the spatial inhomogeneities of the ion chain in a linear Paul trap.

Thermal and quantum fluctuations in chains of ultracold polar molecules

Ultracold polar molecules, in highly anisotropic traps and interacting via a repulsive dipolar potential, may form one-dimensional chains at high densities. According to classical theory, at low temperatures there exists a critical value of the density at which a second-order phase transition from a linear to a zigzag chain occurs. We study the effect of thermal and quantum fluctuations on these self-organized structures using classical and quantum Monte Carlo methods, by means of which we evaluate the pair correlation function and the static structure factor. Depending on the parameters, these functions exhibit properties typical of a crystalline or of a liquid system. We compare the thermal and the quantum results, identifying analogies and differences. Finally, we discuss experimental parameter regimes where the effects of quantum fluctuations on the linear-zigzag transition can be observed.

Ground state of low-dimensional dipolar gases: Linear and zigzag chains

We study the ground-state phase diagram of ultracold dipolar gases in highly anisotropic traps. Starting from a one-dimensional geometry, by ramping down the transverse confinement along one direction, the gas reaches various planar distributions of dipoles. At large linear densities, when the dipolar gas exhibits a crystal-like phase, critical values of the transverse frequency exist below which the configuration exhibits transverse patterns. These critical values are found by means of a classical theory, and are in full agreement with classical Monte Carlo simulations. The study of the quantum system is performed numerically with Monte Carlo techniques and shows that the quantum fluctuations smoothen the transition and make it completely disappear in a gas phase. These predictions could be experimentally tested and would allow one to reveal the effect of zero-point motion on self-organized mesoscopic structures of matter waves, such as the transverse pattern of the zigzag chain.

Entanglement entropy dynamics of Heisenberg chains

By means of the time dependent density matrix renormalization group algorithm we study the zero-temperature dynamics of the Von Neumann entropy of a block of spins in a Heisenberg chain after a sudden quench in the anisotropy parameter. In the absence of any disorder the block entropy increases linearly with time and then saturates. We analyse the velocity of propagation of the entanglement as a function of the initial and final anisotropies and compare our results, wherever possible, with those obtained by means of conformal field theory. In the disordered case we find a slower ( logarithmic) evolution which may signal the onset of entanglement localization.

From perfect to fractal transmission in spin chains

Perfect state transfer is possible in modulated spin chains [Phys. Rev. Lett. 92, 187902 (2004)], imperfections, however, are likely to corrupt the state transfer. We study the robustness of this quantum communication protocol in the presence of disorder both in the exchange couplings between the spins and in the local magnetic field. The degradation of the fidelity can be suitably expressed, as a function of the level of imperfection and the length of the chain, in a scaling form. In addition the time signal of fidelity becomes fractal. We further characterize the state transfer by analyzing the spectral properties of the Hamiltonian of the spin chain.

Nonlinear excitations in ferromagnetic chains with nearest and next nearest neighbor exchange interactions

Weakly nonlinear excitations in one-dimensional isotropic Heisenberg ferromagnetic chains with nearest- and next-nearest-neighbor exchange interactions are considered. Based on the properties of modulational stability of corresponding linear spin waves, the existence regions of bright and dark magnetic solitons of the system are discussed in the whole Brillouin zone. The antidark soliton mode which is convex soliton super-imposed with a plane wave component is obtained near the zero-dispersion points of the spin wave frequency spectrum. The analytical results are checked by numerical simulations. [S0163;1829(98)01838-4].

Domain Bundle Boundaries in Single Crystal BaTiO3 Lamellae: Searching for Naturally Forming Dipole Flux-Closure/Quadrupole Chains

Naturally occurring boundaries between bundles of 90° stripe domains, which form in BaTiO3 lamellae on cooling through the Curie Temperature, have been characterized using both piezoresponse force microscopy (PFM) and scanning transmission electron microscopy (STEM). Detailed interpretation of the dipole configurations present at these boundaries (using data taken from PFM) shows that in the vast majority of cases they are composed of simple zigzag 180° domain walls. Topological information from STEM shows that occasionally domain bundle boundaries can support chains of dipole flux closure and quadrupole nanostructures, but these kinds of boundaries are comparatively rare; when such chains do exist, it is notable that singularities at the cores of the dipole
structures are avoided. The symmetry of the boundary shows that diads and centers of inversion exist at positions where core singularities should have been expected.

The chains of the heterodimeric amphibian skin antimicrobial peptide, distinctin, are encoded by separate messenger RNAs

Using a primer to a conserved nucleotide sequence of previously-cloned skin peptides of Phyllomedusa species, two distinct cDNAs were “shotgun” cloned from a skin secretion-derived cDNA library of the frog, Phyllomedusa burmeisteri. The two ORFs separately encode chains A and B of an analog of the previously-reported heterodimeric peptide, distinctin. LC-MS/MS analysis of native versus dithiotreitol reduced crude venom, confirmed the predicted primary sequences as well as the cystine link between the two monomers. Distinctin predominantly exists in the venom as a heterodimer (A-B), neither of the constituent peptides were detected as monomer, whereas of the two possible homodimers (A-A or B-B), only B-B was detected in comparatively low quantity. In vitro dimerization of synthetic replicates of the monomers demonstrated that besides heterodimer, both homodimers are also formed in considerable amounts. Distinctin is the first example of an amphibian skin dimeric peptide that is formed by covalent linkage of two chains that are the products of different mRNAs. How this phenomenon occurs in vivo, to exclude significant homodimer formation, is unclear at present but a “favored steric state” type of interaction between chains is most likely.

A framework for designing robust food supply chains

After years of emphasis on leanness and responsiveness businesses are now experiencing their vulnerability to supply chain disturbances. Although more literature is appearing on this subject, there is a need for an integrated framework to support the analysis and design of robust food supply chains. In this chapter we present such a framework. We define the concept of robustness and classify supply chain disturbances, sources of food supply chain vulnerability, and adequate redesign principles and strategies to achieve robust supply chain performances. To test and illustrate its applicability, the research framework is applied to a meat supply chain.

Exchange potential from the common energy denominator approximation for the Kohn-Sham Green's function: Application to (hyper)polarizabilities of molecular chains

An approximate Kohn-Sham (KS) exchange potential v(xsigma)(CEDA) is developed, based on the common energy denominator approximation (CEDA) for the static orbital Green's function, which preserves the essential structure of the density response function. v(xsigma)(CEDA) is an explicit functional of the occupied KS orbitals, which has the Slater v(Ssigma) and response v(respsigma)(CEDA) potentials as its components. The latter exhibits the characteristic step structure with "diagonal" contributions from the orbital densities \psi(isigma)\(2), as well as "off-diagonal" ones from the occupied-occupied orbital products psi(isigma)psi(j(not equal1)sigma). Comparison of the results of atomic and molecular ground-state CEDA calculations with those of the Krieger-Li-Iafrate (KLI), exact exchange (EXX), and Hartree-Fock (HF) methods show, that both KLI and CEDA potentials can be considered as very good analytical "closure approximations" to the exact KS exchange potential. The total CEDA and KLI energies nearly coincide with the EXX ones and the corresponding orbital energies epsilon(isigma) are rather close to each other for the light atoms and small molecules considered. The CEDA, KLI, EXX-epsilon(isigma) values provide the qualitatively correct order of ionizations and they give an estimate of VIPs comparable to that of the HF Koopmans' theorem. However, the additional off-diagonal orbital structure of v(xsigma)(CEDA) appears to be essential for the calculated response properties of molecular chains. KLI already considerably improves the calculated (hyper)polarizabilities of the prototype hydrogen chains H-n over local density approximation (LDA) and standard generalized gradient approximations (GGAs), while the CEDA results are definitely an improvement over the KLI ones. The reasons of this success are the specific orbital structures of the CEDA and KLI response potentials, which produce in an external field an ultranonlocal field-counteracting exchange potential. (C) 2002 American Institute of Physics.

Entanglement Spectrum, Critical Exponents and Order Parameters in Quantum Spin Chains

We investigate the entanglement spectrum near criticality in finite quantum spin chains. Using finite size scaling we show that when approaching a quantum phase transition, the Schmidt gap, i.e., the difference between the two largest eigenvalues of the reduced density matrix ?1, ?2, signals the critical point and scales with universal critical exponents related to the relevant operators of the corresponding perturbed conformal field theory describing the critical point. Such scaling behavior allows us to identify explicitly the Schmidt gap as a local order parameter.

Robust food supply supply chains:An integrated framework for vulnerability assessment and disturbance management

The operation of supply chains (SCs) has for many years been focused on efficiency, leanness and responsiveness. This has resulted in reduced slack in operations, compressed cycle times, increased productivity and minimised inventory levels along the SC. Combined with tight tolerance settings for the realisation of logistics and production processes, this has led to SC performances that are frequently not robust. SCs are becoming increasingly vulnerable to disturbances, which can decrease the competitive power of the entire chain in the market. Moreover, in the case of food SCs non-robust performances may ultimately result in empty shelves in grocery stores and supermarkets.
The overall objective of this research is to contribute to Supply Chain Management (SCM) theory by developing a structured approach to assess SC vulnerability, so that robust performances of food SCs can be assured. We also aim to help companies in the food industry to evaluate their current state of vulnerability, and to improve their performance robustness through a better understanding of vulnerability issues. The following research questions (RQs) stem from these objectives:
RQ1: What are the main research challenges related to (food) SC robustness?
RQ2: What are the main elements that have to be considered in the design of robust SCs and what are the relationships between these elements?
RQ3: What is the relationship between the contextual factors of food SCs and the use of disturbance management principles?
RQ4: How to systematically assess the impact of disturbances in (food) SC processes on the robustness of (food) SC performances?
To answer these RQs we used different methodologies, both qualitative and quantitative. For each question, we conducted a literature survey to identify gaps in existing research and define the state of the art of knowledge on the related topics. For the second and third RQ, we conducted both exploration and testing on selected case studies. Finally, to obtain more detailed answers to the fourth question, we used simulation modelling and scenario analysis for vulnerability assessment.
Main findings are summarised as follows.
Based on an extensive literature review, we answered RQ1. The main research challenges were related to the need to define SC robustness more precisely, to identify and classify disturbances and their causes in the context of the specific characteristics of SCs and to make a systematic overview of (re)design strategies that may improve SC robustness. Also, we found that it is useful to be able to discriminate between varying degrees of SC vulnerability and to find a measure that quantifies the extent to which a company or SC shows robust performances when exposed to disturbances.
To address RQ2, we define SC robustness as the degree to which a SC shows an acceptable performance in (each of) its Key Performance Indicators (KPIs) during and after an unexpected event that caused a disturbance in one or more logistics processes. Based on the SCM literature we identified the main elements needed to achieve robust performances and structured them together to form a conceptual framework for the design of robust SCs. We then explained the logic of the framework and elaborate on each of its main elements: the SC scenario, SC disturbances, SC performance, sources of food SC vulnerability, and redesign principles and strategies.
Based on three case studies, we answered RQ3. Our major findings show that the contextual factors have a consistent relationship to Disturbance Management Principles (DMPs). The product and SC environment characteristics are contextual factors that are hard to change and these characteristics initiate the use of specific DMPs as well as constrain the use of potential response actions. The process and the SC network characteristics are contextual factors that are easier to change, and they are affected by the use of the DMPs. We also found a notable relationship between the type of DMP likely to be used and the particular combination of contextual factors present in the observed SC.
To address RQ4, we presented a new method for vulnerability assessments, the VULA method. The VULA method helps to identify how much a company is underperforming on a specific Key Performance Indicator (KPI) in the case of a disturbance, how often this would happen and how long it would last. It ultimately informs the decision maker about whether process redesign is needed and what kind of redesign strategies should be used in order to increase the SC’s robustness. The VULA method is demonstrated in the context of a meat SC using discrete-event simulation. The case findings show that performance robustness can be assessed for any KPI using the VULA method.
To sum-up the project, all findings were incorporated within an integrated framework for designing robust SCs. The integrated framework consists of the following steps: 1) Description of the SC scenario and identification of its specific contextual factors; 2) Identification of disturbances that may affect KPIs; 3) Definition of the relevant KPIs and identification of the main disturbances through assessment of the SC performance robustness (i.e. application of the VULA method); 4) Identification of the sources of vulnerability that may (strongly) affect the robustness of performances and eventually increase the vulnerability of the SC; 5) Identification of appropriate preventive or disturbance impact reductive redesign strategies; 6) Alteration of SC scenario elements as required by the selected redesign strategies and repeat VULA method for KPIs, as defined in Step 3.
Contributions of this research are listed as follows. First, we have identified emerging research areas - SC robustness, and its counterpart, vulnerability. Second, we have developed a definition of SC robustness, operationalized it, and identified and structured the relevant elements for the design of robust SCs in the form of a research framework. With this research framework, we contribute to a better understanding of the concepts of vulnerability and robustness and related issues in food SCs. Third, we identified the relationship between contextual factors of food SCs and specific DMPs used to maintain robust SC performances: characteristics of the product and the SC environment influence the selection and use of DMPs; processes and SC networks are influenced by DMPs. Fourth, we developed specific metrics for vulnerability assessments, which serve as a basis of a VULA method. The VULA method investigates different measures of the variability of both the duration of impacts from disturbances and the fluctuations in their magnitude.
With this project, we also hope to have delivered practical insights into food SC vulnerability. First, the integrated framework for the design of robust SCs can be used to guide food companies in successful disturbance management. Second, empirical findings from case studies lead to the identification of changeable characteristics of SCs that can serve as a basis for assessing where to focus efforts to manage disturbances. Third, the VULA method can help top management to get more reliable information about the “health” of the company.
The two most important research opportunities are: First, there is a need to extend and validate our findings related to the research framework and contextual factors through further case studies related to other types of (food) products and other types of SCs. Second, there is a need to further develop and test the VULA method, e.g.: to use other indicators and statistical measures for disturbance detection and SC improvement; to define the most appropriate KPI to represent the robustness of a complete SC. We hope this thesis invites other researchers to pick up these challenges and help us further improve the robustness of (food) SCs.