Effect of high temperature, biaxial stretching on the thermal and mechanical properties of HDPE/MWCNT sheet

High density polyethylene (HDPE)/multi-walled carbon nanotube (MWCNT) composites containing 4 wt% MWCNTs were prepared by melt mixing followed by compression moulding into sheet. Compression moulded sheets were heated to just below the melting temperature and biaxially stretched at ratios (SRs) of 2, 2.5 and 3.0. The effect of stretching on the thermal and mechanical properties of the sheet was studied by differential scanning calorimetry (DSC) and tensile testing. DSC results show that the crystallinity of all the stretched samples increases by approximately 13% due to strain induced crystallization. The melting temperature of the biaxially stretched samples increases only slightly while crystallization temperature is not affected. Tensile test results indicate that at a SR of 2.5 the elastic modulus of the stretched composites increases by 17.6% relative to the virgin HDPE, but the breaking strength decreases by 33%. While the elastic modulus and breaking strength of the HDPE/MWCNT samples continue to increase as SR increases they drop off after a SR of 2.5 for the virgin HDPE. This is probably due to the constraining influence of the nanotubes preventing the relaxation of polymer chains caused by adiabatic heating at high SRs. The addition of MWCNTs results in significant strain hardening during deformation. While this will lead to increased energy requirement in forming it will also result in a more stable process and the ability to produce deep draw containers with more uniform wall thickness

Explanations for child sexual abuse given by convicted offenders in Malawi:no evidence for "HIV cleansing"

OBJECTIVE: A commonly cited, but unproven reason given for the rise in reported cases of child sexual abuse in Sub-Saharan Africa is the "HIV cleansing myth"-the belief that an HIV infected individual can be cured by having sex with a child virgin. The purpose of this study was to explore in Malawi the reasons given by convicted sex offenders for child sexual abuse and to determine if a desire to cure HIV infection motivated their offence.

METHODS: Offenders convicted of sexual crimes against victims under the age of 18 were interviewed in confidence in Malawi's two largest prisons. During the interview the circumstances of the crime were explored and the offenders were asked what had influenced them to commit it. Each participant was asked the closed question "Did you think that having sex with your victim would cure or cleanse you from HIV?"

RESULTS: 58 offenders agreed to participate. The median (range) age of offenders and victims was 30 (16-66) years and 14 (2-17) years, respectively. Twenty one respondents (36.2%) denied that an offence had occurred. Twenty seven (46.6%) admitted that they were motivated by a desire to satisfy their sexual desires. Six (10.3%) stated they committed the crime only because they were under the influence of drugs or alcohol. None of the participants said that a desire to cure or avoid HIV infection motivated the abuse.

CONCLUSION: This study suggests that offenders convicted of a sexual crime against children in Malawi were not motivated by a desire to be cured or "cleansed" from HIV infection. A need to fulfil their sexual urges or the disinhibiting effect of drugs or alcohol was offered by the majority of participants as excuses for their behaviour.

Rotary moulding of ceramic hollow wares

A novel processing method for the fast and economic production of hollow ceramic components has been developed by combining in situ coagulation moulding with a modified version of the technique of rotary moulding[Binner, J. G. P., Al-Dawery, I. A., Tari, G. and Yan, Y., Rotary casting technique. UK Patent application No. 0506349.0, March 2005], the latter being adapted from the polymer industry. The process was found to require a high solids content suspension, hence development work was performed in this direction though in the end a new, commercial suspension was utilised. Of the three forming routes of gel casting, direct coagulation casting and in situ coagulation moulding, the latter was found to be the most promising for the new process of rotary moulding of ceramics. Due to the low value of clay-based ceramics, a new low cost coagulant was identified and the effect of lactone concentration and temperature on setting time determined. Following substantial optimisation work, it was found that a two-speed approach to multi-axial rotation was the most successful; medium sized cream jugs could be produced in just 7 min. With respect to mould materials, the porous resin normally used for pressure casting of sanitary ware was found to be the best option, though since this is quite expensive conventional plaster-of-paris moulds were found to be a suitable material to enable companies, particularly SMEs, to become familiar with the technology whilst avoiding high costs for trials. The processed articles could be successfully fired and glazed using gas-fired kilns with no sign of any black cores. Major advantages of the process include the ability to precisely calculate the amount of ceramic slip required, eliminating either slip wastage or the need to pour used slip back into the virgin material as currently happens with slip casting. In addition, since the precursor suspension has a very high solids content, the time and energy required to dry the green product and associated moulds has been considerably reduced. © 2008 Elsevier Ltd. All rights reserved.