Conservation genetics of Neotropical pollinators revisited: microsatellite analysis suggests that diploid males are rare in orchid bees

Allozyme analyses have suggested that Neotropical orchid bee (Euglossini) pollinators are vulnerable because of putative high frequencies of diploid males, a result of loss of sex allele diversity in small hymenopteran populations with single locus complementary sex determination. Our analysis of 1010 males from 27 species of euglossine bees sampled across the Neotropics at 2-11 polymorphic microsatellite loci revealed only 5 diploid males at an overall frequency of 0.005 (95% CIs 0.002-0.010); errors through genetic non-detection of diploid males were likely small. In contrast to allozyme-based studies, we detected very weak or insignificant population genetic structure, even for a pair of populations >500 km apart, possibly accounting for low diploid male frequencies. Technical flaws in previous allozyme-based analyses have probably led to considerable overestimation of diploid male production in orchid bees. Other factors may have a more immediate impact on population persistence than the genetic load imposed by diploid males on these important Neotropical pollinators.

The preparation of highly ordered single layer ZSM-5 coating on prefabricated stainless steel microchannels

An elegant way to prepare catalytically active microreactors is by applying a coating of zeolite crystals onto a metal microchannel structure. In this study the hydrothermal formation of ZSM-5 zeolitic coatings on AISI 316 stainless steel plates with a microchannel structure has been investigated at different synthesis mixture compositions. The procedures of coating and thermal treatment have also been optimized. Obtaining a uniform thickness of the coating within 0.5 mm wide microchannels requires a careful control of various synthesis variables. The role of these factors and the problems in the synthesis of these zeolitic coatings are discussed. In general, the synthesis is most sensitive to the H2O/Si ratio as well as to the orientation of the plates with respect to the gravity vector. Ratios of H2O/Si=130 and Si/template=13 were found to be optimal for the formation of a zeolitic film with a thickness of one crystal at a temperature of 130 degreesC and a synthesis time of about 35 h. At such conditions, ZSM-5 crystals were formed with a typical size of 1.5 mu mx1.5 mu mx1.0 mum and a very narrow (within 0.2 mum) crystal size distribution. The prepared samples proved to be active in the selective catalytic reduction (SCR) of NO with ammonia. The activity tests have been carried out in a plate-type microreactor. The microreactor shows no mass transfer limitations and a larger SCR reaction rate is observed in comparison with pelletized Ce-ZSM-5 catalysts; (C) 2001 Elsevier Science B.V. All rights reserved.

Lack of in vitro and in vivo effects of lipopolysaccharide on porcine circovirus type 2 infection

Porcine circovirus type 2 (PCV2) is the causative agent of postweaning multisystemic wasting syndrome (PMWS). The presence of immunostimulating factors or concurrent infections seems to be crucial for PMWS development. Lipopolysaccharide (LPS) is a potent immunological activator and has recently been suggested to enhance PCV2 replication in vitro. This study was designed to evaluate the effects of different LPS products on PCV2 in vitro replication of pulmonary macrophages (PMs), and on the potential ability to trigger PMWS in cesarean-derived, colostrum-deprived (CDCD) PCV2-inoculated piglets. In vitro studies using two different PCV2 isolates (Stoon-1010 and 1452/3) showed the presence of PCV2 antigen within the cytoplasm to a variable degree; PCV2 Stoon-1010 was barely detectable (

Gold nanoparticles as novel agents for cancer therapy

Gold nanoparticles are emerging as promising agents for cancer therapy and are being investigated as drug carriers, photothermal agents, contrast agents and radiosensitisers. This review introduces the field of nanotechnology with a focus on recent gold nanoparticle research which has led to early-phase clinical trials. In particular, the pre-clinical evidence for gold nanoparticles as sensitisers with ionising radiation in vitro and in vivo at kilovoltage and megavoltage energies is discussed.

Utility in Willingness to Pay Space: A Tool to Address Confounding Random Scale Effects in Destination Choice to the Alps

We compare two approaches for estimating the distribution of consumers' willingness to pay (WTP) in discrete choice models. The usual procedure is to estimate the distribution of the utility coefficients and then derive the distribution of WTP, which is the ratio of coefficients. The alternative is to estimate the distribution of WTP directly. We apply both approaches to data on site choice in the Alps. We find that the alternative approach fits the data better, reduces the incidence of exceedingly large estimated WTP values, and provides the analyst with greater control in specifying and testing the distribution of WTP. © 2008 Agricultural and Applied Economics Association.

Bright Laser-Driven Neutron Source Based on the Relativistic Transparency of Solids

Neutrons are unique particles to probe samples in many ?elds of research ranging from biology to material sciences to engineering and security applications. Access to bright, pulsed sources is currently
limited to large accelerator facilities and there has been a growing need for compact sources over the recent years. Short pulse laser driven neutron sources could be a compact and relatively cheap way to
produce neutrons with energies in excess of 10 MeV. For more than a decade experiments have tried to obtain neutron numbers suf?cient for applications. Our recent experiments demonstrated an ion acceleration mechanism based on the concept of relativistic transparency. Using this new mechanism, we produced an intense beam of high energy (up to 170 MeV) deuterons directed into a Be converter to
produce a forward peaked neutron ?ux with a record yield, on the order of 1010 n=sr. We present results comparing the two acceleration mechanisms and the ?rst short pulse laser generated neutron radiograph.

The development of a surface defect machining method for hard turning processes

Hard turning (HT) is a material removal process employing a combination of a single point cutting tool and high speeds to machine hard ferrous alloys which exhibit hardness values over 45 HRC. In this paper, a surface defect machining (SDM) method for HT is proposed which harnesses the combined advantages of porosity machining and pulsed laser pre-treatment processing. From previous experimental work, this was shown to provide better controllability of the process and improved quality of the machined surface. While the experiments showed promising results, a comprehensive understanding of this new technique could only be achieved through a rigorous, in depth theoretical analysis. Therefore, an assessment of the SDM technique was carried out using both finite element method (FEM) and molecular dynamics (MD) simulations.
FEM modelling was used to compare the conventional HT of AISI 4340 steel (52 HRC) using an Al2O3 insert with the proposed SDM method. The simulations showed very good agreement with the previously published experimental results. Compared to conventional HT, SDM provided favourable machining outcomes, such as reduced shear plane angle, reduced average cutting forces, improved surface roughness, lower residual stresses on the machined surface, reduced tool–chip interface contact length and increased chip flow velocity. Furthermore, a scientific explanation of the improved surface finish was revealed using a state-of-the-art MD simulation model which suggested that during SDM, a combination of both the cutting action and rough polishing action help improve the machined surface finish.

Role of glycation in modification of lens crystallins in diabetic and nondiabetic senile cataracts

To assess the significance of glycation, nonenzymatic browning, and oxidation of lens crystallins in cataract formation in elderly diabetic patients, we measured three distinct products of glycation, browning, and oxidation reactions in cataractous lens crystallins from 29 diabetic patients (mean +/- SD age 72.8 +/- 8.8 yr) and 24 nondiabetic patients (age 73.5 +/- 8.3 yr). Compounds measured included 1) fructoselysine (FL), the first stable product of glycation; 2) pentosidine, a fluorescent, carbohydrate-derived protein cross-link between lysine and arginine residues formed during nonenzymatic browning; and 3) N epsilon-(carboxymethyl)lysine (CML), a product of autoxidation of sugar adducts to protein. In diabetic compared with nondiabetic patients, there were significant increases (P less than 0.001) in HbA1 (10.2 +/- 3.1 vs. 7.1 +/- 0.7%), FL (7.6 +/- 5.4 vs. 1.7 +/- 1.2 mmol/mol lysine), and pentosidine (6.3 +/- 2.8 vs. 3.8 +/- 1.9 mumol/mol lysine). The disproportionate elevation of FL compared with HbA1 suggests a breakdown in the lens barrier to glucose in diabetes, whereas the increase in pentosidine is indicative of accelerated nonenzymatic browning of diabetic lens crystallins. CML levels were similar in the two groups (7.1 +/- 2.4 vs. 6.8 +/- 3.0 mmol/mol lysine), providing no evidence for increased oxidative stress in the diabetic cataract. Thus, although the modification of lens crystallins by autoxidation reactions was not increased in diabetes, the increase in glycation and nonenzymatic browning suggests that these processes may acclerate the development of cataracts in diabetic patients.

Electrochemical versus gas-phase oxidation of ru single-crystal surfaces

The electrochemical uptake of oxygen on a Ru(0001) electrode was investigated by electron diffraction, Auger spectroscopy, and cyclic voltammetry. An ordered (2 × 2)-O overlayer forms at a potential close to the hydrogen region. At +0.42 and +1.12 V vs Ag/AgCl, a (3 × 1) phase and a (1 × 1)-O phase, respectively, emerge. When the Ru electrode potential is maintained at +1.12 V for 2 min, RuO2 grows epitaxially with its (100) plane parallel to the Ru(0001) surface. In contrast to the RuO domains, the non-oxidized regions of the Ru electrode surface are flat. If, however, the electrode potential is increased to +1.98 V for 2 min, the remaining non-oxidized Ru area also becomes rough. These findings are compared with O overlayers and oxides on the Ru(0001) and Ru(101¯1) surfaces created by exposure to gaseous O under UHV conditions. On the other hand, gas-phase oxidation of the Ru(101¯0) surface leads to the formation of RuO with a (100) orientation. It is concluded that the difference in surface energy between RuO(110) and RuO(100) is quite small. RuO again grows epitaxially on Ru(0001), but with the (110) face oriented parallel to the Ru(0001) surface. The electrochemical oxidation of the Ru(0001) electrode surface proceeds via a 3-dimensional growth mechanism with a mean cluster size of 1.6 nm, whereas under UHV conditions, a 2-dimensional oxide film (1-2 nm thick) is epitaxially formed with an average domain size of 20 µm. © 2000 American Chemical Society.

Disordered vascular compliance in haemochromatosis

Background: A relationship may exist between body iron stores, endothelial dysfunction and overall cardiovascular risk.

Aims: To compare vascular compliance, biochemical endothelial function and antioxidant status between patients with homozygous hereditary haemochromatosis and healthy controls.

Methods: Haemochromatosis patients and healthy controls were recruited. Measures of vascular compliance were assessed by applanation tonometry. Serological markers of endothelial function (plasma lipid hydroperoxides, cell adhesion molecules), antioxidant levels (ascorbate, lipid soluble antioxidants) and high-sensitivity C-reactive protein (CRP) were also measured.

Results: Thirty-five hereditary haemochromatosis patients (ten females, mean age 54.6) and 36 controls (27 female, mean age 54.0) were recruited. Haemochromatosis patients had significantly higher systolic and diastolic blood pressures. Pulse wave velocity (PWV) was significantly higher in male haemochromatosis patients (9.90 vs. 8.65 m/s, p = 0.048). Following adjustment for age and blood pressure, male haemochromatosis patients continued to have a trend for higher PWVs (+1.37 m/s, p = 0.058). Haemochromatosis patients had significantly lower levels of ascorbate (46.11 vs. 72.68 lmol/L, p = 0.011), retinol (1.17 vs. 1.81 lmol/L, p = 0.001) and g-tocopherol (2.51 vs. 3.14 lmol/L, p = 0.011). However, there was no difference in lipid hydroperoxides (0.46 vs. 0.47 nmol/L, p = 0.94), cell adhesion molecule levels (ICAM: 348.12 vs. 308.03 ng/mL, p = 0.32 and VCAM: 472.78 vs. 461.31 ng/mL, p = 0.79) or high-sensitivity CRP (225.01 vs. 207.13 mg/L, p = 0.32).

Conclusions: Haemochromatosis is associated with higher PWVs in males and diminished antioxidants across the sexes but no evidence of endothelial dysfunction or increased lipid peroxidation.

Prospective clinical audit of chloral hydrate administration practices in a neonatal unit

Aim: Chloral hydrate is generally considered a safe and effective single dosing procedural sedative for neonates in the clinical setting. However, its safety profile as a repetitive dosing maintenance sedative is largely unknown. This study aimed to document current administration practices of chloral hydrate in the Neonatal Unit, Royal Children's Hospital, Melbourne, Australia, over a 6-month period.

Methods: Patients who had been prescribed chloral hydrate during the specified audit period were recruited into the study and prospectively followed for a period of 28 days, or until they were discharged from the unit. Demographic data were collected on recruitment, and daily documentation of chloral hydrate administration was recorded.

Results: A total of 238 doses of chloral hydrate were administered to a cohort of 32 patients during the study period. The majority of the audited doses (84%) were ordered as repeating doses. Doses were more likely to be given at night than during the day, and the median dosage for repetitive dosing was found to be above the study site's recommended dosing range. Pre-dose and/or post-dose assessment of distress/agitation accompanied dosage approximately half of the time. The audit did not reveal any recognisable pattern of sedation maintenance or weaning process for patients who received multiple doses.

Conclusions: Health-care professionals caring for hospitalised infants should be made aware of the potential risks of chloral hydrate as a repetitive dosing sedative, and of the importance of systematically evaluating the appropriateness and effectiveness of utilising such pharmacological intervention for managing and treating distress.

Enabling ultra high precision on hard steels using surface defect machining

This paper is an extension to an idea coined during the 13th EUSPEN Conference (P6.23) named "surface defect machining" (SDM). The objective of this work was to demonstrate how a conventional CNC turret lathe can be used to obtain ultra high precision machined surface finish on hard steels without recourse to a sophisticated ultra precision machine tool. An AISI 4340 hard steel (69 HRC) workpiece was machined using a CBN cutting tool with and without SDM. Post-machining measurements by a Form Talysurf and a Scanning Electron Microscope (FEI Quanta 3D) revealed that SDM culminates to several key advantages (i) provides better quality of the machined surface integrity and offers (ii) lowering feed rate to 5μm/rev to obtain a machined surface roughness of 30 nm (optical quality).

Let's talk about health: shoppers' discourse regarding health while food shopping

Objective: The present study aimed to examine the role of health in consumers’ food purchasing decisions through investigating the nature of people’s discourse regarding health while conducting their food shopping.

Design: The study employed the think-aloud technique as part of an accompanied shop. All mentions of health and terms relating to health were identified from the data set. Inductive thematic analysis was conducted to examine how health was talked about in relation to people’s food choice decisions.

Setting: Supermarkets in Dublin, Republic of Ireland and Belfast, Northern Ireland.

Subjects Participants: (n 50) were aged over 18 years and represented the main household shopper.

Results: Responsibility for others and the perceived need to illicit strict control to avoid ‘unhealthy’ food selections played a dominant role in how health was talked about during the accompanied shop. Consequently healthy shopping was viewed as difficult and effort was required to make the healthy choice, with shoppers relating to product-based inferences to support their decisions.

Conclusions: This qualitative exploration has provided evidence of a number of factors influencing the consideration of health during consumers’ food shopping. These results highlight opportunities for stakeholders such as public health bodies and the food industry to explore further ways to help enable consumers make healthy food choices.

Human mesenchymal stem cells reduce the severity of acute lung injury in a sheep model of bacterial pneumonia

Background Human bone marrow-derived mesenchymal stem (stromal) cells (hMSCs) improve survival in mouse models of acute respiratory distress syndrome (ARDS) and reduce pulmonary oedema in a perfused human lung preparation injured with Escherichia coli bacteria. We hypothesised that clinical grade hMSCs would reduce the severity of acute lung injury (ALI) and would be safe in a sheep model of ARDS.

Methods Adult sheep (30–40 kg) were surgically prepared. After 5 days of recovery, ALI was induced with cotton smoke insufflation, followed by instillation of live Pseudomonas aeruginosa (2.5×10¹¹ CFU) into both lungs under isoflurane anaesthesia. Following the injury, sheep were ventilated, resuscitated with lactated Ringer's solution and studied for 24 h. The sheep were randomly allocated to receive one of the following treatments intravenously over 1 h in one of the following groups: (1) control, PlasmaLyte A, n=8; (2) lower dose hMSCs, 5×10⁶ hMSCs/kg, n=7; and (3) higher-dose hMSCs, 10×10⁶ hMSCs/kg, n=4.

Results By 24 h, the PaO₂/FiO₂ ratio was significantly improved in both hMSC treatment groups compared with the control group (control group: PaO₂/FiO₂ of 97±15 mm Hg; lower dose: 288±55 mm Hg (p=0.003); higher dose: 327±2 mm Hg (p=0.003)). The median lung water content was lower in the higher-dose hMSC-treated group compared with the control group (higher dose: 5.0 g wet/g dry [IQR 4.9–5.8] vs control: 6.7 g wet/g dry [IQR 6.4–7.5] (p=0.01)). The hMSCs had no adverse effects.

Conclusions Human MSCs were well tolerated and improved oxygenation and decreased pulmonary oedema in a sheep model of severe ARDS.