Development and validation of an HPLC method for the determination of spironolactone and its metabolites in paediatric plasma samples

Abstract An HPLC method has been developed and validated for the determination of spironolactone, 7a-thiomethylspirolactone and canrenone in paediatric plasma samples. The method utilises 200 µl of plasma and sample preparation involves protein precipitation followed by Solid Phase Extraction (SPE). Determination of standard curves of peak height ratio (PHR) against concentration was performed by weighted least squares linear regression using a weighting factor of 1/concentration2. The developed method was found to be linear over concentration ranges of 30–1000 ng/ml for spironolactone and 25–1000 ng/ml for 7a-thiomethylspirolactone and canrenone. The lower limit of quantification for spironolactone, 7a-thiomethylspirolactone and canrenone were calculated as 28, 20 and 25 ng/ml, respectively. The method was shown to be applicable to the determination of spironolactone, 7a-thiomethylspirolactone and canrenone in paediatric plasma samples and also plasma from healthy human volunteers.

Partial structure of the phylloxin gene from the giant monkey frog, Phyllomedusa bicolor: parallel cloning of precursor cDNA and genomic DNA from lyophilized skin secretion

Phylloxin is a novel prototype antimicrobial peptide from the skin of Phyllomedusa bicolor. Here, we describe parallel identification and sequencing of phylloxin precursor transcript (mRNA) and partial gene structure (genomic DNA) from the same sample of lyophilized skin secretion using our recently-described cloning technique. The open-reading frame of the phylloxin precursor was identical in nucleotide sequence to that previously reported and alignment with the nucleotide sequence derived from genomic DNA indicated the presence of a 175 bp intron located in a near identical position to that found in the dermaseptins. The highly-conserved structural organization of skin secretion peptide genes in P. bicolor can thus be extended to include that encoding phylloxin (plx). These data further reinforce our assertion that application of the described methodology can provide robust genomic/transcriptomic/peptidomic data without the need for specimen sacrifice.

Applications of statistical models in proportioning medium strength self-compacting concrete

Self-compacting concrete (SCC) is generally designed with a relatively higher content of finer, which includes cement, and dosage of superplasticizer than the conventional concrete. The design of the current SCC leads to high compressive strength, which is already used in special applications, where the high cost of materials can be tolerated. Using SCC, which eliminates the need for vibration, leads to increased speed of casting and thus reduces labour requirement, energy consumption, construction time, and cost of equipment. In order to obtain and gain maximum benefit from SCC it has to be used for wider applications. The cost of materials will be decreased by reducing the cement content and using a minimum amount of admixtures. This paper reviews statistical models obtained from a factorial design which was carried out to determine the influence of four key parameters on filling ability, passing ability, segregation and compressive strength. These parameters are important for the successful development of medium strength self-compacting concrete (MS-SCC). The parameters considered in the study were the contents of cement and pulverised fuel ash (PFA), water-to-powder ratio (W/P), and dosage of superplasticizer (SP). The responses of the derived statistical models are slump flow, fluidity loss, rheological parameters, Orimet time, V-funnel time, L-box, JRing combined to Orimet, JRing combined to cone, fresh segregation, and compressive strength at 7, 28 and 90 days. The models are valid for mixes made with 0.38 to 0.72 W/P ratio, 60 to 216 kg/m3 of cement content, 183 to 317 kg/m3 of PFA and 0 to 1% of SP, by mass of powder. The utility of such models to optimize concrete mixes to achieve good balance between filling ability, passing ability, segregation, compressive strength, and cost is discussed. Examples highlighting the usefulness of the models are presented using isoresponse surfaces to demonstrate single and coupled effects of mix parameters on slump flow, loss of fluidity, flow resistance, segregation, JRing combined to Orimet, and compressive strength at 7 and 28 days. Cost analysis is carried out to show trade-offs between cost of materials and specified consistency levels and compressive strength at 7 and 28 days that can be used to identify economic mixes. The paper establishes the usefulness of the mathematical models as a tool to facilitate the test protocol required to optimise medium strength SCC.

Synthesis, Kinetic Evaluation and Utilization of a Biotinylated Dipeptide Proline Diphenyl Phosphonate for the Disclosure of Dipeptidyl Peptidase IV-like Serine Proteases

In this study, we report on the synthesis, kinetic characterisation, and application of a novel biotinylated and active site-directed inactivator of dipeptidyl peptidase IV (DPP-IV). Thus, the dipeptide-derived proline diphenyl phosphonate NH(2)-Glu(biotinyl-PEG)-Pro(P)(OPh)(2) has been prepared by a combination of classical solution- and solid-phase methodologies and has been shown to be an irreversible inhibitor of porcine DPP-IV, exhibiting an over all second-order rate constant (k(i)/K(i)) for inhibition of 1.57 x 10(3) M(-1) min(-1). This value compares favourably with previously reported rates of inactivation of DPP-IV by dipeptides containing a P(1) proline diphenyl phosphonate grouping [B. Boduszek, J. Oleksyszyn, C.M. Kam, J. Selzler, R.E. Smith, J.C. Powers, Dipeptide phophonates as inhibitors of dipeptidyl peptidase IV, J. Med. Chem. 37 (1994) 3969-3976; B.F. Gilmore, J.F. Lynas, C.J. Scott, C. McGoohan, L. Martin, B. Walker, Dipeptide proline diphenyl phosphonates are potent, irreversible inhibitors of seprase (FAPalpha), Biochem, Biophys. Res. Commun. 346 (2006) 436-446.], thus demonstrating that the incorporation of the side-chain modified (N-biotinyl-3-(2-(2-(3-aminopropyloxy)-ethoxy)-ethoxy)-propyl) glutamic acid residue at the P(2) position is compatible with inhibitor efficacy. The utilisation of this probe for the detection of both purified dipeptidyl peptidase IV and the disclosure of a dipeptidyl peptidase IV-like activity from a clinical isolate of Porphyromonas gingivalis, using established electrophoretic and Western blotting techniques previously developed by our group, is also demonstrated.

Making 'party identification' more versatile: operationalising the concept for the multiparty setting

The conventional operationalisation of the concept of party identification is not appropriate for the multiparty setting. I offer new measures that facilitate multiple, and negative as well as positive, identities. Using survey evidence from Northern Ireland, these new measures are validated in a number of ways and their role in a comprehensive model of voting is illustrated.

The Tragedy of Darfur and the Limits of the Responsibility to Protect

The view that states which claim sovereign status must comply with the responsibility to protect their own citizens is gaining ground in international politics. When a state is unable or unwilling to meet this responsibility, the international community is justified in intervening militarily to end widespread human rights violations. This article argues that a diffuse responsibility to protect, as currently conceived, may have important negative consequences. By using the ongoing tragedy of Darfur as an example, the article argues that the responsibility to protect is reactive and focused on the short term, contributes to the outbreak of violence and perversely provides repressed groups with a further incentive to continue their armed struggle after war breaks out. The tragedy of Darfur shows that effective protection requires case-specific policies aimed at prevention, democratization and economic and political development.

CaII K interstellar observations towards early-type disc and halo stars

We present high-resolution (R = lambda/Deltalambda similar to 40 000) Ca II K interstellar observations (lambda(air) = 3933.66Angstrom) towards 88 mainly B-type stars, of which 74 are taken from the Edinburgh-Cape or Palomar-Green surveys, and 81 have > 25degrees. The majority of the data come from previously existing spectroscopy, although also included are 18 new observations of stars with echelle spectra taken with UVES on the Very Large Telescope UT2 (Kueyen). Some 49 of the sample stars have distance estimates above the Galactic plane (z) greater than or equal to 1 kpc, and are thus good probes of the halo interstellar medium. Of the 362 interstellar Ca K components that we detect, 75 (21 per cent) have absolute values of their LSR velocity values exceeding 40 km s(-1). In terms of the deviation velocity for the sightlines with distance estimates, 46/273 (17 per cent) of components have velocity values exceeding those predicted by standard Galactic rotation by more than 40 km s(-1). Combining this data set with previous observations, we find that the median value of the reduced equivalent width (REW) of stars with z greater than or equal to 1 kpc (EW x sin ) is similar to 115 mAngstrom (n = 80), similar to that observed in extragalactic sightlines by Bowen. Using data of all z distances, the REW at infinity is found to be similar to 130 mAngstrom, with the scaleheight (1) of the Ca II K column density distribution being;z 800 pc (n = 196) and reduced column density at infinity of log[N(Ca II K) cm(-2)] similar to 12.24. This implies that similar to30 per cent of Ca II K absorption occurs at distances exceeding similar to1 kpc. For nine sightlines, with distance exceeding 1 kpc and with a companion object within 5degrees, we find that all but two have values of Ca II reduced equivalent width the same to within similar to20 per cent, when the REW of the nearest object is extrapolated to the distance of the further of the pair, and assuming 1 = 800 pc. For 29 of our sightlines with z greater than or equal to 1 kpc and a H I detection from the Leiden-Dwingeloo survey (beamsize of 0.5degrees), we find log(N(Ca II K)IN(H I)) ranging from -7.4 to - 8.4. Values of the Ca II K abundance relative to neutral hydrogen (log[N(Ca II K) cm(-2)] - log[N(H I) cm(-2)]) are found to be more than similar to0.5 dex higher in stars with distances exceeding approximate to100 pc, when compared with the (log[N(Ca II K) cm(-2)] -log[N(H-tot) cm(-2)]) values found in nearby sightlines such as those in Wakker & Mathis (2000). Finally, stellar Ca II K equivalent widths of the sample are determined for 26 objects.

A non-LTE analysis of the spectra of two narrow lined main sequence stars in the SMC

An analysis of high-resolution VLT/UVES spectra of two B-type main sequence stars, NGC 346-11 and AV 304, in the Small Magellanic Cloud (SMC), has been undertaken, using the non-LTE tlusty model atmospheres to derive the stellar parameters and chemical compositions of each star. The chemical compositions of the two stars are in reasonable agreement. Moreover, our stellar analysis agrees well with earlier analyses of H II regions. The results derived here should be representative of the current base-line chemical composition of the SMC interstellar medium as derived from B-type stars.

The VLT-FLAMES survey of massive stars: mass loss and rotation of early-type stars in the SMC

We have studied the optical spectra of a sample of 31 O- and early B-type stars in the Small Magellanic Cloud, 21 of which are associated with the young massive cluster NGC 346. Stellar parameters are determined using an automated fitting method (Mokiem et al. 2005, A&A, 441, 711), which combines the stellar atmosphere code FASTWIND (Puls et al. 2005, A&A, 435, 669) with the genetic algorithm based optimisation routine PIKAIA (Charbonneau 1995, ApJS, 101, 309). Comparison with predictions of stellar evolution that account for stellar rotation does not result in a unique age, though most stars are best represented by an age of 1-3 Myr. The automated method allows for a detailed determination of the projected rotational velocities. The present day v(r) sin i distribution of the 21 dwarf stars in our sample is consistent with an underlying rotational velocity (v(r)) distribution that can be characterised by a mean velocity of about 160-190 km s(-1) and an effective half width of 100-150 km s(-1). The vr distribution must include a small percentage of slowly rotating stars. If predictions of the time evolution of the equatorial velocity for massive stars within the environment of the SMC are correct (Maeder & Meynet 2001, A&A, 373, 555), the young age of the cluster implies that this underlying distribution is representative for the initial rotational velocity distribution. The location in the Hertzsprung-Russell diagram of the stars showing helium enrichment is in qualitative agreement with evolutionary tracks accounting for rotation, but not for those ignoring vr. The mass loss rates of the SMC objects having luminosities of log L-star/L-circle dot greater than or similar to 5.4 are in excellent agreement with predictions by Vink et al. (2001, A&A, 369, 574). However, for lower luminosity stars the winds are too weak to determine. M accurately from the optical spectrum. Three targets were classified as Vz stars, two of which are located close to the theoretical zero-age main sequence. Three lower luminosity targets that were not classified as Vz stars are also found to lie near the ZAMS. We argue that this is related to a temperature effect inhibiting cooler from displaying the spectral features required for the Vz luminosity class.