Trust considerations on attitudes towards online purchasing: The moderating effect of privacy and security concerns

The research examines the relationships between three common trust considerations (vendor, Internet and third parties) and attitudes towards online purchasing. The study incorporates privacy and security concerns as a moderating variable and finds that these relationships vary depending on the level of concerns a consumer has when purchasing online. The study suggests that "fears" surrounding the Internet as a place to do business still hinder the use of it for e-commerce purposes, but that the presence of a reputable agent might in some manner mitigate this risk. In the context of business to consumer relationships trust in the vendor is important for the consumer to accept any risk associated with a transaction. Theoretical implications for online customer behavior theory are also discussed. © 2009 Elsevier Inc.

Efficacy of a standard meticillin-resistant Staphylococcus aureus decolonisation protocol in routine clinical practice

Summary

Decolonisation may reduce the risk of meticillin-resistant Staphylococcus aureus (MRSA) infection in individual carriers and prevent transmission to other patients. The aims of this prospective cohort study were to determine the long-term efficacy of a standardised decolonisation regimen and to identify factors associated with failure. Patients colonised with MRSA underwent decolonisation, which was considered to be successful if there was no growth in three consecutive sets of site-specific screening swabs obtained weekly post treatment. If patients were successfully decolonised, follow-up cultures were performed 6 and 12 months later. Of 137 patients enrolled, 79 (58%) were successfully decolonised. Of these 79, 53 (67%) and 44 (56%) remained decolonised at 6 and 12 months respectively. Therefore only 44/137 (32%) patients who completed decolonisation were MRSA negative 12 months later. Outcome was not associated with a particular strain of MRSA. Successful decolonisation was less likely in patients colonised with a mupirocin-resistant isolate (adjusted odds ratio: 0.08; 95% confidence interval: 0.02–0.30), in patients with throat colonisation (0.22; 0.07–0.68) and in patients aged >80 years (0.30; 0.10–0.93) compared with those aged 60–80 years. These findings suggest that although initially successful in some cases, the protocol used did not result in long-term clearance of MRSA carriage for most patients.

The exponentiated convex variable step-size (ECVSS) algorithm

For some time there is a large interest in variable step-size methods for adaptive filtering. Recently, a few stochastic gradient algorithms have been proposed, which are based on cost functions that have exponential dependence on the chosen error. However, we have experienced that the cost function based on exponential of the squared error does not always satisfactorily converge. In this paper we modify this cost function in order to improve the convergence of exponentiated cost function and the novel ECVSS (exponentiated convex variable step-size) stochastic gradient algorithm is obtained. The proposed technique has attractive properties in both stationary and abrupt-change situations. (C) 2010 Elsevier B.V. All rights reserved.

Some properties of the speciation model for food-web structure - Mechanisms for degree distributions and intervality

We present a mathematical analysis of the speciation model for food-web structure, which had in previous work been shown to yield a good description of empirical data of food-web topology. The degree distributions of the network are derived. Properties of the speciation model are compared to those of other models that successfully describe empirical data. It is argued that the speciation model unities the underlying ideas of previous theories. In particular, it offers a mechanistic explanation for the success of the niche model of Williams and Martinez and the frequent observation of intervality in empirical food webs. (c) 2005 Elsevier Ltd. All rights reserved.

Effect of batch size on mechanical properties of granules in high shear granulation

The flow patterns in a high shear granulator depend on the fill volume. For example, DEM simulations reported by Terashita et al. [1] show that fill volume affects the velocities and kinetic energies of the particles. It also influences the granule size distribution [2]. Here the effects on the properties of the granule are described. The total mass of the granulate material was varied without changing the other variables such as impeller speed, granulation time and liquid to solid ratio. The resulting mechanical properties, such as strength, yield stress and Young's modulus, of the granules were measured. For the materials studied in the current work, increasing the fill factor (batch size) increased the values of these material parameters. This could be explained by the relative increase in the number and intensity of collisions between the particles, when the size of a batch was increased, leading to smaller porosities. (c) 2010 Elsevier B.V. All rights reserved.

Helix pomatia agglutinin lectin-binding oligosaccharides of aggressive breast cancer

Predicting long-term outcome after breast-cancer diagnosis remains problematic, particularly for patients with clinically small, axillary lymph node- negative tumours, Evidence suggests that the lectin Helix pomatia agglutinin (HPA) identifies oligosaccharides associated with poor-prognosis cancer. Our aim was to identify oligosaccharides that bind HPA in aggressive breast cancers. Breast-cancer cell lines (MCF-7, BT-549 and BT-20) and a cell line From human milk (HBL-100), which showed a range of HPA-binding intensities, were used to extract HPA-binding glycoproteins, Oligosaccharides were released using anhydrous hydrazine and separated on a range of HPLC matrices. We investigated whether HPA-binding oligosaccharides from cell lines were present in human breast-cancer tissues, using 69 breast-cancer specimens from patients with between 5 and 10 years' follow-up. A monosialylated oligosaccharide was over-expressed in the cell line that bound HPA strongly. Further analysis by normal-phase HPLC showed that the 2-aminobenzamide-conjugated oligosaccharide had a hydrodynamic volume of 4.58 glucose units (HPAgly 1), Increased expression of HPAgly 1 was associated with HPA staining of breast-cancer specimens (Student's t-test p = 0.025). Analysis of oligosaccharide levels and disease-free survival after treatment for breast cancer indicated a shorter disease-free interval for patients with elevated levels of HPAgly 1, This is the first time that histochemical lectin staining has been correlated with biochemical mapping of oligosaccharides, Using this approach, we have identified a monosialylated HPA lectin-binding oligosaccharide present in breast-cancer cells grown in vitro which is elevated in breast-cancer specimens that bind the lectin, (C) 2001 Wiley-Liss, Inc.

The expression of RUNX3 in colorectal cancer is associated with disease stage and patient outcome

RUNX3 is believed to have tumour suppressor properties in several cancer types. Inactivation of RUNX3 has been shown to occur by methylation-induced transcriptional silencing and by mislocalization of the protein to the cytoplasm. The aim of this study was to examine the clinical significance of RUNX3 expression in a large series of colorectal cancers using immunohistochemistry and tissue arrays. With advancing tumour stage, expression of RUNX3 in the nucleus decreased, whereas expression restricted to the cytoplasmic compartment increased. Nuclear RUNX3 expression was associated with significantly better patient survival compared to tumours in which the expression of RUNX3 was restricted to the cytoplasm (P = 0.025). These results support a role for RUNX3 as a tumour suppressor in colorectal cancer.

Mutational hotspot in Exon 20 of PIK3CA in breast cancer among Singapore Chinese

The recent identification of somatic mutations in the catalytic region of PIK3 (PIK3CA) in breast cancer and demonstration of their oncogenic function has implicated PIK3CA in mammary carcinogenesis. To investigate possible ethnic differences in patterns of PIK3CA mutations in Singaporean Chinese breast cancer and to characterize these in a panel of cell lines, we sequenced exons 9 and 20 in 80 primary tumors, 19 breast cancer cell lines and 7 normal human mammary epithelial cells (HMECs). Searching for novel hotspots of mutation, we sequenced additional exons ( 1, 2, 6, 7, 14 and 18) in 20 primary tumors and 6 breast cancer cell lines. We detected 33 point mutations in 31 of 80 (39%) breast cancers, and 11 mutations in 10 of 19 (53%) breast cancer cell lines. No mutations were detected in normal breast tissue adjacent to the tumor, or in the 6 normal HMECs. The exon 20 A3140G (H1047R) substitution was identified most frequently (22/31, 71%) and showed a significant association with patient age ( p = 0.043) and stage of the disease ( p = 0.025), but not with ER/PR status or histological grade of the tumor. The incidence of point mutations in PIK3CA, the A3140G substitution in particular, in Singapore breast cancers are among the most frequent reported to date for any gene in breast cancer. The results suggest that mutation of PIK3CA might contribute to development of early stage breast cancer and could provide a potent target for early diagnosis and therapy.

Stir bar sorptive extraction of diclofenac from liquid formulations: A proof of concept study

A new stir bar sorptive extraction (SBSE) technique coupled with HPLC-UV method for quantification of diclofenac in pharmaceutical formulations has been developed and validated as a proof of concept study. Commercially available polydimethylsiloxane stir bars (Twister (TM)) were used for method development and SBSE extraction (pH, phase ratio, stirring speed, temperature, ionic strength and time) and liquid desorption (solvents, desorption method, stirring time etc) procedures were optimised. The method was validated as per ICH guidelines and was successfully applied for the estimation of diclofenac from three liquid formulations viz. Voltarol (R) Optha single dose eye drops, Voltarol (R) Ophtha multidose eye drops and Voltarol (R) ampoules. The developed method was found to be linear (r=0.9999) over 100-2000 ng/ml concentration range with acceptable accuracy and precision (tested over three QC concentrations). The SBSE extraction recovery of the diclofenac was found to be 70% and the LOD and LOQ of the validated method were found to be 16.06 and 48.68 ng/ml, respectively. Furthermore, a forced degradation study of a diclofenac formulation leading to the formation of structurally similar cyclic impurity (indolinone) was carried out. The developed extraction method showed comparable results to that of the reference method, i.e. method was capable of selectively extracting the indolinone and diclofenac from the liquid matrix. Data on inter and intra stir bar accuracy and precision further confirmed robustness of the method, supporting the multiple re-use of the stir bars. (C) 2010 Elsevier B.V. All rights reserved.

Dynamic pricing models for used products in remanufacturing with lost-sales and uncertain quality

In this paper, we investigate the remanufacturing problem of pricing single-class used products (cores) in the face of random price-dependent returns and random demand. Specifically, we propose a dynamic pricing policy for the cores and then model the problem as a continuous-time Markov decision process. Our models are designed to address three objectives: finite horizon total cost minimization, infinite horizon discounted cost, and average cost minimization. Besides proving optimal policy uniqueness and establishing monotonicity results for the infinite horizon problem, we also characterize the structures of the optimal policies, which can greatly simplify the computational procedure. Finally, we use computational examples to assess the impacts of specific parameters on optimal price and reveal the benefits of a dynamic pricing policy. © 2013 Elsevier B.V. All rights reserved.

In situ study of ozone and hybrid plasma Ag-Al catalysts for the oxidation of toluene: Evidence of the nature of the active sites

Silver colloids have been prepared by reducing AgNO3 in aqueous solution and embeded in alumina following a sol-gel procedure in the presence of Pluronic 84 ((EO)(19)(PO)(39)(EO)(19)), as surfactant. Plasma-catalytic experiments aimed at the mineralization of toluene showed that the selectivity to CO2 was significantly increased in the presence of Ag catalysts compared with results obtained using the plasma alone. In-situ studies of the ozone interaction with catalysts provide an insight into the nature of the active sites of supported silver colloids for mineralization reactions. It is noticeable that when ozone is chemisorbed on embedded Ag colloidal catalysts no change in the silver oxidation state or size is found. The population of the chemisorbed species is higher at lower temperatures, where the non-selective decomposition of ozone is smaller. The catalysts exhibit high stability, preserving the structural and textural properties after the catalytic tests, that is indeed very important in the presence of ozone. (C) 2011 Elsevier B.V. All rights reserved.

Limiting withdrawal rate and maximum film thickness during dip-coating of titania sols onto a Si substrate

The article highlights new insights into production of thin titania films widely used as catalyst support in many modern reactors including capillary microreactors, microstructured fixed-bed reactors and falling film microreactors. Dip-coating of a Mania sol onto a Si substrate has been studied in the range of the sol viscosities of 1.5-2.5 mPa s and the sol withdrawal rates of 0.2-18 mm/s. Different viscosities of sols were created by addition of desired amounts of nitric acid to the synthesis mixture of titanium isopropoxide and Plutonic F127 in ethanol which allowed to control the rate of the condensation reactions. Uniform inesoporous titania coatings were obtained at the solvent withdrawal rates below 10 mm/s at sol viscosities in the range from 1.6 mPa s to 2.5 mPa s. There exists a limiting withdrawal rate corresponding to a capillary number of ca. 0.01 beyond which uniform titania films cannot be obtained. Below the limiting withdrawal rate, the coating thickness is a power function of the sol viscosity and withdrawal rate, both with an exponent of 2/3. The limiting withdrawal rate increases as the solvent evaporation rate increases and it decreases as the sol viscosity increases. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.