Multibody modelling of a TB31 and a TB32 crash test with vertical portable concrete barriers: model verification and sensitivity analysis.

In this article the multibody simulation software package MADYMO for analysing and optimizing occupant safety design was used to model crash tests for Normal Containment barriers in accordance with EN 1317. The verification process was carried out by simulating a TB31 and a TB32 crash test performed on vertical portable concrete barriers and by comparing the numerical results to those obtained experimentally. The same modelling approach was applied to both tests to evaluate the predictive capacity of the modelling at two different impact speeds. A sensitivity analysis of the vehicle stiffness was also carried out. The capacity to predict all of the principal EN1317 criteria was assessed for the first time: the acceleration severity index, the theoretical head impact velocity, the barrier working width and the vehicle exit box. Results showed a maximum error of 6% for the acceleration severity index and 21% for theoretical head impact velocity for the numerical simulation in comparison to the recorded data. The exit box position was predicted with a maximum error of 4��. For the working width, a large percentage difference was observed for test TB31 due to the small absolute value of the barrier deflection but the results were well within the limit value from the standard for both tests. The sensitivity analysis showed the robustness of the modelling with respect to contact stiffness increase of ��20% and ±40%. This is the first multibody model of portable concrete barriers that can reproduce not only the acceleration severity index but all the test criteria of EN 1317 and is therefore a valuable tool for new product development and for injury biomechanics research.

A scaling method for modelling the crashworthiness of novel roadside barrier designs

In this paper, a novel method for modelling a scaled vehicle–barrier crash test similar to the 20��� angled barrier test specified in EN 1317 is reported. The intended application is for proof-of-concept evaluation of novel roadside barrier designs, and as a cost-effective precursor to full-scale testing or detailed computational modelling. The method is based on the combination of the conservation of energy law and the equation of motion of a spring mass system representing the impact, and shows, for the first time, the feasibility of applying classical scaling theories to evaluation of roadside barrier design. The scaling method is used to set the initial velocity of the vehicle in the scaled test and to provide scaling factors to convert the measured vehicle accelerations in the scaled test to predicted full-scale accelerations. These values can then be used to calculate the Acceleration Severity Index score of the barrier for a full-scale test. The theoretical validity of the method is demonstrated by comparison to numerical simulations of scaled and full-scale angled barrier impacts using multibody analysis implemented in the crash simulation software MADYMO. Results show a maximum error of 0.3% ascribable to the scaling method.

Highly Sensitive, Uniform, and Reproducible Surface-Enhanced Raman Spectroscopy from Hollow Au-Ag Alloy Nanourchins

A hierarchical nanoparticle strategy to simultaneously gain super Raman signal amplification, high uniformity, and reproducibility is presented. Using hollow Au-Ag alloy nanourchins, an ultrahigh sensitivity, e.g., down to 1 fM concentrations for DEHP molecule is obtained. A small standard deviation of <10% is achieved by simply dropping and evaporating sub-100 nm nanourchins onto a substrate.

Novel GlyT1 inhibitor chemotypes by scaffold hopping. Part 2: Development of a [3.3.0]-based series and other piperidine bioisosteres

This Letter describes the development and SAR of a novel series of GlyT1 inhibitors derived from a scaffold hopping approach, in lieu of an HTS campaign, which provided intellectual property position. Members within this new [3.3.0]​-��based series, e.g. I, displayed excellent GlyT1 potency, selectivity, free fraction, and modest CNS penetration. Moreover, enantioselective GlyT1 inhibition was obsd., within this novel series and a no. of other piperidine bioisosteric cores. r/> r/>

Twinning anisotropy of tantalum during nanoindentation

Unlike other BCC metals, the plastic deformation of nanocrystalline Tantalum during compression is regulated by deformation twinning. Whether or not this twinning exhibits anisotropy was investigated through simulation of displacement-controlled nanoindentation test using molecular dynamics simulation. MD data was found to correlate well with the experimental data in terms of surface topography and hardness measurements. The mechanism of the transport of material was identified due to the formation and motion of prismatic dislocations loops (edge dislocations) belonging to the 1/2<111> type and <100> type Burgers vector family. Further analysis of crystal defects using a fully automated dislocation extraction algorithm (DXA) illuminated formation and migration of twin boundaries on the (110) and (111) orientation but not on the (010) orientation and most importantly after retraction all the dislocations disappeared on the (110) orientation suggesting twinning to dominate dislocation nucleation in driving plasticity in tantalum. A significant finding was that the maximum shear stress (critical Tresca stress) in the deformation zone exceeded the theoretical shear strength of tantalum (Shear modulus/ 2��~10.03 GPa) on the (010) orientation but was lower than it on the (110) and the (111) orientations. In light to this, the conventional lore of assuming the maximum shear stress being 0.465 times the mean contact pressure was found to break down at atomic scale.

Multidisciplinary Teamwork in Autism: Can One Size Fit All?

Multidisciplinary practice has become an accepted approach in many education and social and health care fields. In fact, the right to a multidisciplinary assessment is enshrined in the United Nations Convention of the Rights for Persons with Disabilities (United Nations, 2007). In order to avert a 'one size fits all' response to particularly heterogeneous diagnoses, such as autism spectrum disorders (ASD), the National Institute for Clinical Excellence (NICE) recommends multidisciplinary input. Yet, multidisciplinarity lacks empirical evidence of effectiveness, is fraught with conceptual difficulties and methodological incompatibilities, and therefore there is a danger of resorting to an ill-defined eclectic 'hodgepodge' of interventions. Virtually all evidence-based interventions in autism and intellectual disabilities are behaviourally based. Not surprisingly, therefore, professionals trained in behaviour analysis to international standards are increasingly becoming key personnel in multidisciplinary teams. In fact, professionals from a range of disciplines seek training in behaviour analysis. In this article we brought together a multidisciplinary group of professionals from education, health, and social care, most of whom have a dual qualification in an allied health, social care, or educational profession, as well as in behaviour anlaysis. Together we look at the initial training in these professions and explore how behaviour analysis can offer a common and coherent conceptual framework for true multidisciplinarity, based on sound scientific knowledge about behaviour, without resort to reifying theories. We illustrate how this unifying approach can enhance evidence-based multidisciplinary practice so that 'one size' will fit all. Copyright © Australian Psychological Society Ltd 2014.

L'indicateur EU2020 de suivi de la pauvreté et de l'exclusion: une analyse critique

The reduction of poverty and social exclusion is one of the targets of the European Union's 2020 strategy. The appropriateness and success of such a policy require the choice of relevant indicators that not only highlight poverty gaps between countries but also identify the groups of individuals in each country that need particular attention from social policies. The target retained in the European strategy combines three criteria: people living in households below the monetary poverty threshold, poor people “in terms of standard of living” who live in a situation of severe material deprivation, and those who live in households with very low or zero work intensity. We first show that neither the combination nor the intersection of these three criteria produces an adequate measure of the fight against poverty, or an objective for it. We therefore propose an alternative concept, that of “consistent poverty”, which targets people who simultaneously live below the monetary poverty threshold and above a certain level of material deprivation. The special material deprivation module of the EU-SILC 2009 database allows us to examine two versions of this notion of deprivation: the measurement of “severe” deprivation currently used by the European Union, which adopts a threshold with four items, and an alternative measure of “elementary�� material deprivation with a three-item threshold. The intersection between our three-item elementary deprivation criterion and the monetary poverty criterion produces more satisfactory results than those obtained by the European Union approach, in terms of both coherency and profile of the population identified.