A Case Report on Parvovirus B19 Associated Myositis

Introduction: Whilst there are reports of viral myopathies affecting children and the immunocompromised, infective myositis is a relatively rare inflammatory myopathy in adults. The clinical spectrum can range from benign myalgias to more serious complications in certain risk groups. Case Presentation: We present two cases of myositis as a result of parvovirus B19 infection.
Conclusion: Viral myositis and parvovirus B19 associated myositis should be considered in adults presenting with significant myalgia.

Fluorescence based fibre optic pH sensor for the pH 10–13 range suitable for corrosion monitoring in concrete structures

The design, development and evaluation of an optical fibre pH sensor for monitoring pH in the alkaline region are discussed in detail in this paper. The design of this specific pH sensor is based on the pH induced change in fluorescence intensity of a coumarin imidazole dye which is covalently attached to a polymer network and then fixed to the distal end of an optical fibre. The sensor provides a response over a pH range of 10.0–13.2 with an acceptable response rate of around 50 min, having shown a very good stability over a period of longer than 20 months thus far. The sensor has also demonstrated little cross-sensitivity to ionic strength (IS) and also excellent photostability through a series of laboratory tests. These features make this type of sensor potentially well suited for in situ long term monitoring of pH in concrete structures, to enhance structural monitoring in the civil engineering sector

Transgressing Contemporary Boundaries:The Narrator as True Custodian of Cultural Knowledge in Ulster Society

Historically in Gaelic culture, the bard was greatly valued and admired as an important and integral part of society. Travelled, schooled and specifically trained in their art, the bard helped ensure identity and reassurance for Gaelic families by grounding them both temporarily and spatially into their landscape. Entrusted with the duty and responsibility of recording place and event, the bards worked without writing and by transgressing man-made boundaries, travelled throughout the land weaving their histories into the very fabric of society.

Now no longer with us, we find ourselves without the distinguished chronicler to undertake this duty. Yet the responsibility of the Gaelic bard is one still shared by all artists today; to facilitate memory and identity, whether good or bad. Many Ulster writers, by happenstance and geography have found themselves located in a place of painful histories. An immediate difficulty for those local writers becomes manifest by being intrinsically implicated into those histories – whilst having first-hand knowledge and comprehension beyond that of the outsider, the local writer is automatically damned by association and relationship, thereby tarnishing their voice in comparison to the perceived impartiality of others.
Some writers however have successfully sought ways to escape this limitation and have worked in ways that can transgress the restrictions of prejudgement. John Hewitt, by purposely becoming a self-imposed tourist was able to distance himself to write impartially about the past, recognising that ’the place without its ghosts is a barren place.’1 In ‘The Colony’,2 tradition, peoples and mapping of the land are all narrated by Hewitt in a similar way to the Gaelic bardic topographic poems of Sean O'Dubhagain and Giolla Na Naomh O'Huidhrin3 in compiling a rich cultural atlas.

Similarly the Belfast poet and novelist Ciaran Carson also writes and records the city from an intermediary position; that of translator. Mediating between reader and aisling,4 Carson himself takes the reader on a journey into name, meaning, time and place, focusing primarily on the city of Belfast, familiar in name but impenetrable in depth to most.

Furthermore, this once-forgotten tradition to chronicle is now being continued by the new breed of Irish crime writers where the likes of Brian McGilloway, Stuart Neville and Adrian McKinty can, by way of the crime novel, accurately record contemporary society. Thus, ghost estates, listed buildings, archaeological digs, street and city have all provided setting and subject matter for recent novels. Moreover by choosing the ‘outsider from within’ as their chief protagonist, whether detective or criminal, each author is able to transgress the boundaries of prejudice and preconception that hinder genuine understanding and knowledge.

Looking in turn at the Gaelic bard, the twentieth century Ulster poet and the new breed of Irish crime writer, the authors will outline the real value of the narrator, by being able to act as cultural transgressor beyond the seeming and alleged as the true chronicler in society, and then with specific reference to city and countryside in Ireland, as a valuable custodian of knowledge in architecture and place.

Keywords
Architecture, Crime Fiction, Cultural Atlas, Place, Poetry.

1 From ‘The Bloody Brae’, a one act play written by John Hewitt in the 1930’s.
2 Hewitt, J. (1968) published in Collected Poems 1932-67. London:McGibbon & Kee.
3 Lengthy and detailed medieval Gaelic poems composed in the fourteenth and fifteenth centuries first edited by John O'Donovan in 1862 for the Irish Archaeological and Celtic Society in Dublin.
4 The aisling is the Irish song or poem genre when the poet is visited by their muse in a daydream or dream-vision state.

Integrating allowable design strains in composites with whole life value

Fibre-Reinforced Plastics (FRPs) have been used in civil aerospace vehicles for decades. The current state-of-the-art in airframe design and manufacture results in approximately half the airframe mass attributable to FRP materials. The continual increase in the use of FRP materials over metallic alloys is attributable to the material's superior specific strength and stiffness, fatigue performance and corrosion resistance. However, the full potential of these materials has yet to be exploited as analysis methods to predict physical failure with equal accuracy and robustness are not yet available. The result is a conservative approach to design, but one that can bring benefit via increased inspection intervals and reduced cost over the vehicle life. The challenge is that the methods used in practice are based on empirical tests and real relationships and drivers are difficult to see in this complex process and so the trade-off decision is challenging and uncertain. The aim of this feasibility study was to scope a viable process which could help develop some rules and relationships based on the fundamental mechanics of composite material and the economics of production and operation, which would enhance understanding of the role and impact of design allowables across the life of a composite structure.

The prediction of process-induced deformation in a thermoplastic composite in support of manufacturing simulation

Digital manufacturing techniques can simulate complex assembly sequences using computer-aided design-based, as-designed' part forms, and their utility has been proven across several manufacturing sectors including the ship building, automotive and aerospace industries. However, the reality of working with actual parts and composite components, in particular, is that geometric variability arising from part forming or processing conditions can cause problems during assembly as the as-manufactured' form differs from the geometry used for any simulated build validation. In this work, a simulation strategy is presented for the study of the process-induced deformation behaviour of a 90 degrees, V-shaped angle. Test samples were thermoformed using pre-consolidated carbon fibre-reinforced polyphenylene sulphide, and the processing conditions were re-created in a virtual environment using the finite element method to determine finished component angles. A procedure was then developed for transferring predicted part forms from the finite element outputs to a digital manufacturing platform for the purpose of virtual assembly validation using more realistic part geometry. Ultimately, the outcomes from this work can be used to inform process condition choices, material configuration and tool design, so that the dimensional gap between as-designed' and as-manufactured' part forms can be reduced in the virtual environment.

NONLINEAR NUMERICAL MODELLING OF LIGHTENING STRIKE EFFECT ON COMPOSITE PANELS WITH TEMPERATURE DEPENDANT MATERIAL PROPERTIES

Lightning strike is one of the challenges that the aerospace industry is facing in an effort to increase the percentage of composite materials used in aircraft structures. Lightning strike damage is due to high orthotropic electric resistivity of the composite panels, which leads to high thermal loads that cause decomposition of the epoxy and delimitations of the laminates. Yet, experimental testing of lightning strike on aircraft panels is expensive due to the large number of design parameters that can control the inflicted damage. A coupled thermal-electrical finite element analysis is used to investigate the design variables space that can affect lightning strike damage on epoxy/graphite composite panels. The contribution of this study is modeling the composite panels’ material properties as temperature dependent, which was excluded by other researchers. A number of practical solutions to minimize the damage effect are proposed. Two set of experimental results are used to verify the numerical ones. One experimental set for plain composite panel, and second one for composite panels with joints

Field-Isolated Genotypes of Mycobacterium bovis Vary in Virulence and Influence Case Pathology but Do Not Affect Outbreak Size

Strains of many infectious agents differ in fundamental epidemiological parameters including transmissibility, virulence and pathology. We investigated whether genotypes of Mycobacterium bovis (the causative agent of bovine tuberculosis, bTB) differ significantly in transmissibility and virulence, combining data from a nine-year survey of the genetic structure of the M. bovis population in Northern Ireland with detailed records of the cattle population during the same period. We used the size of herd breakdowns as a proxy measure of transmissibility and the proportion of skin test positive animals (reactors) that were visibly lesioned as a measure of virulence. Average breakdown size increased with herd size and varied depending on the manner of detection (routine herd testing or tracing of infectious contacts) but we found no significant variation among M. bovis genotypes in breakdown size once these factors had been accounted for. However breakdowns due to some genotypes had a greater proportion of lesioned reactors than others, indicating that there may be variation in virulence among genotypes. These findings indicate that the current bTB control programme may be detecting infected herds sufficiently quickly so that differences in virulence are not manifested in terms of outbreak sizes. We also investigated whether pathology of infected cattle varied according to M. bovis genotype, analysing the distribution of lesions recorded at post mortem inspection. We concentrated on the proportion of cases lesioned in the lower respiratory tract, which can indicate the relative importance of the respiratory and alimentary routes of infection. The distribution of lesions varied among genotypes and with cattle age and there were also subtle differences among breeds. Age and breed differences may be related to differences in susceptibility and husbandry, but reasons for variation in lesion distribution among genotypes require further investigation. © 2013 Wright et al.