Effects of arsenic-contaminated irrigation water on growth, yield, and nutrient concentration in rice

A study was undertaken to determine the effects of different concentrations of arsenic (As) in irrigation water on Boro (dry-season) rice (Oryza sativa) and their residual effects on the following Aman (wet-season) rice. There were six treatments, with 0, 0.1, 0.25, 0.5, 1, and 2 mg As L-1 applied as disodium hydrogen arsenate. All the growth and yield parameters of Boro rice responded positively at lower concentrations of up to 0.25 mg As L-1 in irrigation water but decreased sharply at concentrations more than 0.5 mg As L-1. Arsenic concentrations in grain and straw of Boro rice increased significantly with increasing concentration of As in irrigation water. The grain As concentration was in the range of 0.25 to 0.97 μg g-1 and its concentration in rice straw varied from 2.4 to 9.6 μg g-1 over the treatments. Residual As from previous Boro rice showed a very similar pattern in the following Aman rice, although As concentration in Aman rice grain and straw over the treatments was almost half of the As levels in Boro rice grain. Arsenic concentrations in both grain and straw of Boro and Aman rice were found to correlate with iron and be antagonistic with phosphorus. Copyright © Taylor & Francis Group, LLC.

Arsenic uptake and accumulation in rice (Oryza sativa L.) irrigated with contaminated water

Long-term use of arsenic contaminated groundwater to irrigate crops, especially paddy rice (Oryza sativa L.) has resulted in elevated soil arsenic levels in Bangladesh. There is, therefore, concern regarding accumulation of arsenic in rice grown on these soils. A greenhouse pot experiment was conducted to evaluate the impact of arsenic-contaminated irrigation water on the growth and uptake of arsenic into rice grain, husk, straw and root. There were altogether 10 treatments which were a combination of five arsenate irrigation water concentrations (0-8 mg As l^-1) and two soil phosphate amendments. Use of arsenate containing irrigation water reduced plant height, decreased rice yield and affected development of root growth. Arsenic concentrations in all plant parts increased with increasing arsenate concentration in irrigation water. However, arsenic concentration in rice grain did not exceed the maximum permissible limit of 1.0 mg As kg^-1. Arsenic accumulation in rice straw at very high levels indicates that feeding cattle with such contaminated straw could be a direct threat for their health and also, indirectly, to human health via presumably contaminated bovine meat and milk. Phosphate application neither showed any significant difference in plant growth and development, nor in As concentrations in plant parts.

Arsenate resistance in the ericoid mycorrhizal fungus Hymenoscyphus ericae

• Differential resistance to arsenate (AsO₄ ^3-) is demonstrated here among populations of the ericoid mycorrhizal fungus Hymenoscyphus ericae isolated from Calluna vulgaris in natural heathland soils and soils contaminated with AsO₄ ^3-. • Isolates (c. 25) of the fungus from each of two As and Cu mine sites, and a natural heathland site, were screened for AsO₄ ^3- and Cu²⁺ resistance by growing isolates in media containing a range of AsO₄ ^3- and Cu²⁺ concentrations. • H. ericae populations from the mine sites demonstrated resistance to AsO₄ ^3- compared with the heathland population; the mine-site populations producing significant growth at the highest AsO₄ ^3- concentration (4.67 mol m^-3), whereas growth of the heathland population was almost completely inhibited. EC₅₀ values for mine-site isolates were estimated to be 5-41-times higher than the heathland population. All isolates produced identical responses to increasing Cu²⁺ concentrations, with no differences observed between mine-site and heathland isolates. • Populations of H. ericae on the contaminated mine sites have developed adaptive resistance to AsO₄ ^3-. By contrast, Cu²⁺ resistance appears to be constitutive.

Genetic diversity of root-associated fungal endophytes from Calluna vulgaris at contrasting field sites

A total of 107 putative ericoid mycorrhizal endophytes were isolated from hair roots of Calluna vulgaris from two abandoned arsenic/copper mine sites and a natural heathland site in southwest England. The endophytes were initially grouped as 14 RFLP types, based on the results of ITS-RFLP analysis using the restriction endonucleases Hinf I, Rsa I and Hae III. ITS sequences were obtained for representative isolates from each RFLP type and compared phylogenetically with sequences for known ericoid mycorrhizal endophytes and selected ascomycetes. The majority of endophyte isolates (62-92%) from each site were identified as Hymenoscyphus ericae, but a number of other less common mycorrhizal RFLP types were also identified, all of which appear to have strong affinities with the order Leotiales. None of the less common RFLP types was isolated from C. vulgaris at more than one field site. Neighbour-joining analysis indicated similarities between the endophytes from C. vulgaris and mycorrhizal endophytes isolated from other Ericaceae and Epacridaceae hosts in North America and Australia.

Temporal and spatial patterns in α- and γ-hexachlorocyclohexane concentrations in industrially contaminated rivers

Fluxes of HCH isomers α- and γ-HCH dynamics were determined in four industrial U.K. rivers feeding the North Sea. Sampling was conducted weekly basis over a 2-year period. This was complemented by discrete studies of events where two hourly sampling periods were used to investigate the fine time scale dynamics of fluxes. Two intensively industrialized rivers had average isomer concentrations of ~20 ng L^-1 for both isomers, while average concentrations in the two less industrialized rivers ranged between 1.5 and 5.0 ng L^-1. α-HCH concentrations showed no strong temporal patterns on any river, which contrasts with γ-HCH levels that increased considerably during late summer/early autumn following sustained periods of low river flow. Sampling during high river flow events on rivers with differing HCH pollution histories both showed the same dynamics in HCH isomer concentrations. γ-HCH concentrations decreased 4-fold during events while α-HCH-concentrations stayed constant. The increases in γ-HCH concentrations under low flow conditions and the rapid dilution of this isomer during events indicate that γ-HCH has current inputs to these river systems. It was calculated that these four rivers export 30.8 kg yr^-1 of γ-HCH and 14.8 kg yr^-1 of α-HCH to the North Sea.

Freshwater Reservoir Effects on the Re-Dating of the Eurasian Steppe Cultures: New Data for the Prehistoric Sites of Kazakhstan and South of Siberia

Freshwater reservoir effects (FRE) can cause a major problem with radiocarbon dating human skeletal material in the Eurasian steppe. Recent research has demonstrated that, for the Eneolithic to Early Bronze Age sites of North-Eastern Kazakhstan, the maximum fish-herbivore freshwater reservoir offset observed equals 301±47 14C yrs, as such indicating that 14C dates from aquatic and human samples from the area apparently need to be interpreted with caution as they are likely to be affected by the offset. The current paper presents the new data on the FRE of the Eneolithic to the Early Iron Age sites of Kazakhstan and South of Siberia.

The role of low coverage sodium surface species on electrochemical promotion in a Pt/YSZ system

The effect of sodium-modification on the catalyst and electrocatalytic properties of a platinum catalyst supported on a YSZ solid electrolyte was studied. Increasing the sodium coverage on the catalyst surface appears to block some of the three-phase boundary (tpb) sites and reduces the rate of the charge transfer reaction. The promotion of the platinum surface reaction (ethylene oxidation) seems to a first approximation to be a function of the rate of oxygen supply or removal to or from the surface irrespective of whether this is contaminated by sodium or not (samples with sodium contamination require a higher overpotential to achieve the same current density as a clean sample because of poisoning in the tpb). At high negative polarisations (oxygen removed from the surface) the sodium contaminated samples show a significant increase in rate, possibly due to the decomposition of e.g. sodium hydroxides and carbonates. © 2012 Elsevier B.V.

A primer for use of genetic tools in selecting and testing the suitability of set-aside sites protected from deep-sea seafloor massive sulfide mining activities

Seafloor massive sulfide (SMS) mining will likely occur at hydrothermal systems in the near future. Alongside their mineral wealth, SMS deposits also have considerable biological value. Active SMS deposits host endemic hydrothermal vent communities, whilst inactive deposits support communities of deep water corals and other suspension feeders. Mining activities are expected to remove all large organisms and suitable habitat in the immediate area, making vent endemic organisms particularly at risk from habitat loss and localised extinction. As part of environmental management strategies designed to mitigate the effects of mining, areas of seabed need to be protected to preserve biodiversity that is lost at the mine site and to preserve communities that support connectivity among populations of vent animals in the surrounding region. These "set-aside" areas need to be biologically similar to the mine site and be suitably connected, mostly by transport of larvae, to neighbouring sites to ensure exchange of genetic material among remaining populations. Establishing suitable set-asides can be a formidable task for environmental managers, however the application of genetic approaches can aid set-aside identification, suitability assessment and monitoring. There are many genetic tools available, including analysis of mitochondrial DNA (mtDNA) sequences (e.g. COI or other suitable mtDNA genes) and appropriate nuclear DNA markers (e.g. microsatellites, single nucleotide polymorphisms), environmental DNA (eDNA) techniques and microbial metagenomics. When used in concert with traditional biological survey techniques, these tools can help to identify species, assess the genetic connectivity among populations and assess the diversity of communities. How these techniques can be applied to set-aside decision making is discussed and recommendations are made for the genetic characteristics of set-aside sites. A checklist for environmental regulators forms a guide to aid decision making on the suitability of set-aside design and assessment using genetic tools. This non-technical primer document represents the views of participants in the VentBase 2014 workshop.

Systematically retrieving research in the digital age: Case study on the topic of social networking sites and young people’s mental health

Online information seeking has become normative practice among both academics and the general population. This study appraised the performance of eight databases to retrieve research pertaining to the influence of social networking sites on the mental health of young people. A total of 43 empirical studies on young people’s use of social networking sites and the mental health implications were retrieved. Scopus and SSCI had the highest sensitivity with PsycINFO having the highest precision. Effective searching requires large
generic databases, supplemented by subject-specific catalogues. The methodology developed here may provide inexperienced searchers, such as undergraduate students, with a framework to define a realistic scale of searching to undertake for a particular literature review or similar project.

Design, production and characterisation of granular adsorbent material for arsenic removal from contaminated wastewater

The objective of this research was to design granulated iron oxide for the adsorption of heavy metals from wastewater. Polyvinyl acetate (PVAc) was chosen as a suitable binder; as it is water insoluble. Initial experiments on selection of suitable solvent of the polymer were carried out using three solvents namely; methanol, acetone and toluene. Based on the initial tests on product yield and mechanical strength, acetone was selected as the solvent for the polyvinyl acetate binder. Design of experiment was then used to investigate the influence of granulation process variables; impeller speed, binder concentration and liquid to solid ratio on the properties of the granular materials. The response variables in the study were granules mean size, stability in water and granule strength. The results showed that the combination of high impeller speed and high binder concentration favour the formation of strong and stable granules. Results also showed that leaching of the binder into the simulated was water was negligible. Trial adsorption experiments carried out using the strongest and most stable iron oxide granules produced in this work showed removal efficiency of around 70% of synthetic arsenic solutions with initial concentration of 1000 ppb.