A comparison of carbon flow from pre-labelled and pulse-labelled plants

Perennial rye-grass was subjected to two different¹⁴C labelling regimes to enable a partitioning of the carbon sources contributing to rhizosphere carbon-flow. Plant/soil microcosms were designed which enabled rye-grass plants to either receive a single pulse of¹⁴C-CO₂ or to be pre-labelled using a series of¹⁴C-CO₂ pulses, allowing the fate of newly photoassimilated carbon and carbon lost by root decomposition to be followed into the soil. For young rye-grass plants grown over a short period, rhizosphere carbon flow was found to be dominated by newly photoassimilated carbon. Evidence for this came from the observed percentage of the total¹⁴C budget (i.e. total¹⁴C-CO₂ fixed by the plants) lost from the root/soil system, which was 30 times greater for the pulse labelled compared to pre-labelled plants. Root decomposition was found to be less at 10°C compared to 20-25°C, though input of¹⁴C into the soil was the same at both temperatures. © 1988 Kluwer Academic Publishers.

Using Flory-Huggins phase diagrams as a pre-formulation tool for the production of amorphous solid dispersions; a comparison between hot-melt extrusion and spray drying

Objectives: Amorphous drug forms provide a useful method of enhancing the dissolution performance of poorly water-soluble drugs; however, they are inherently unstable. In this article, we have used Flory–Huggins theory to predict drug solubility and miscibility in polymer candidates, and used this information to compare spray drying and melt extrusion as processes to manufacture solid dispersions.
Method:  Solid dispersions were characterised using a combination of thermal (thermogravimetric analysis and differential scanning calorimetry) and spectroscopic (Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction methods. 
Key Findings: Spray drying permitted generation of amorphous solid dispersions to be produced across a wider drug concentration than melt extrusion. Melt extrusion provided sufficient energy for more intimate mixing to be achieved between drug and polymer, which may improve physical stability. It was also confirmed that stronger drug–polymer interactions might be generated through melt extrusion. Remixing and dissolution of recrystallised felodipine into the polymeric matrices did occur during the modulated differential scanning calorimetry analysis, but the complementary information provided from FTIR confirms that all freshly prepared spray-dried samples were amorphous with the existence of amorphous drug domains within high drug-loaded samples. 
Conclusion: Using temperature–composition phase diagrams to probe the relevance of temperature and drug composition in specific polymer candidates facilitates polymer screening for the purpose of formulating solid dispersions.

Extracellular DNA impedes the transport of vancomycin in Staphylococcus epidermidis biofilms pre-exposed to sub-inhibitory concentrations of vancomycin

Staphylococcus epidermidis biofilm formation is responsible for the persistence of orthopedic implant infections. Previous studies have shown that exposure of S. epidermidis biofilms to sub-MICs of antibiotics induced an increased level of biofilm persistence. BODIPY FL-vancomycin (a fluorescent vancomycin conjugate) and confocal microscopy were used to show that the penetration of vancomycin through sub-MIC-vancomycin-treated S. epidermidis biofilms was impeded compared to that of control, untreated biofilms. Further experiments showed an increase in the extracellular DNA (eDNA) concentration in biofilms preexposed to sub-MIC vancomycin, suggesting a potential role for eDNA in the hindrance of vancomycin activity. Exogenously added, S. epidermidis DNA increased the planktonic vancomycin MIC and protected biofilm cells from lethal vancomycin concentrations. Finally, isothermal titration calorimetry (ITC) revealed that the binding constant of DNA and vancomycin was 100-fold higher than the previously reported binding constant of vancomycin and its intended cellular D-Ala-D-Ala peptide target. This study provides an explanation of the eDNA-based mechanism of antibiotic tolerance in sub-MIC-vancomycin-treated S. epidermidis biofilms, which might be an important factor for the persistence of biofilm infections.

The significance of bruising in the pre-mobile infant

The majority of children in our society are loved andcherished. The occasional cases of intentional injury to a childresulting in death or significant harm evoke powerful anduncomfortable feelings (Devaney et al, 2013), and the publicoutcry may result in health and social workers facing criticism.Identifying whether an infant is at risk of abuse is a challengefor practitioners, and can be a source of stress and anxiety(Brandon et al, 2011). Bruising is a strong indicator of childabuse involving intentional injury (Kemp et al, 2014). Theincidence of bruising correlates to developmental stage, withnon-mobile infants least likely to incur bruising. Therefore, itspresence in pre-mobile infants requires immediate assessment.A search of the literature around bruising in pre-mobile infantsrevealed themes of missed opportunities for early intervention,the role of the father in the family and the significance of childdevelopment. Sharing of knowledge and expertise within themultidisciplinary team is key to safeguarding infants.

Pre-Processing Power Traces to Defeat Random Clocking Countermeasures

We describe a pre-processing correlation attack on an FPGA implementation of AES, protected with a random clocking countermeasure that exhibits complex variations in both the location and amplitude of the power consumption patterns of the AES rounds. It is demonstrated that the merged round patterns can be pre-processed to identify and extract the individual round amplitudes, enabling a successful power analysis attack. We show that the requirement of the random clocking countermeasure to provide a varying execution time between processing rounds can be exploited to select a sub-set of data where sufficient current decay has occurred, further improving the attack. In comparison with the countermeasure's estimated security of 3 million traces from an integration attack, we show that through application of our proposed techniques that the countermeasure can now be broken with as few as 13k traces.

A pre-embedding immunogold approach for detection of synaptic endocytic proteins in situ

During the past decade, many molecular components of clathrin-mediated endocytosis have been identified and proposed to play various hypothetical roles in the process [Nat. Rev. Neurosci. 1 (2000) 161; Nature 422 (2003) 37]. One limitation to the evaluation of these hypotheses is the efficiency and resolution of immunolocalization protocols currently in use. In order to facilitate the evaluation of these hypotheses and to understand more fully the molecular mechanisms of clathrin-mediated endocytosis, we have developed a protocol allowing enhanced and reliable subcellular immunolocalization of proteins in synaptic endocytic zones in situ. Synapses established by giant reticulospinal axons in lamprey are used as a model system for these experiments. These axons are unbranched and reach up to 80-100 microm in diameter. Synaptic active zones and surrounding endocytic zones are established on the surface of the axonal cylinder. To provide access for antibodies to the sites of synaptic vesicle recycling, axons are lightly fixed and cut along their longitudinal axis. To preserve the ultrastructure of the synaptic endocytic zone, antibodies are applied without the addition of detergents. Opened axons are incubated with primary antibodies, which are detected with secondary antibodies conjugated to gold particles. Specimens are then post-fixed and processed for electron microscopy. This approach allows preservation of the ultrastructure of the endocytic sites during immunolabeling procedures, while simultaneously achieving reliable immunogold detection of proteins on endocytic intermediates. To explore the utility of this approach, we have investigated the localization of a GTPase, dynamin, on clathrin-coated intermediates in the endocytic zone of the lamprey giant synapse. Using the present immunogold protocol, we confirm the presence of dynamin on late stage coated pits [Nature 422 (2003) 37] and also demonstrate that dynamin is recruited to the coat of endocytic intermediates from the very early stages of the clathrin coat formation. Thus, our experiments show that the current pre-embedding immunogold method is a useful experimental tool to study the molecular mechanisms of synaptic vesicle recycling.

Pre-Radiotherapy Dental Assessment of Head and Neck Oncology Patients: An Audit.

Objectives: Approximately 300 people are diagnosed with Head and Neck cancer annually in Northern Ireland. The management may include treatment by surgery or by chemotherapy and radiotherapy,
or a combination of modalities. Patients whose oral cavity, teeth, salivary glands and jaws that
will be affected by treatment, particularly radiotherapy should have a pre-treatment assessment. This should be done as early as possible to maximise the time available for dental management. However, this can be challenging owing to the complexities of cancer diagnosis, treatment planning and multidisciplinary management. At the Belfast Dental Hospital, a number of patients were referred post- radiotherapy with complications after not having received a pre-treatment assessment. The referrals for pre- treatment dental assessment were also late in patients’ multidisciplinary journey, limiting the time period
for dental input. The purpose of this audit was to examine the time period between dental assessment and commencement of radiotherapy and whether this was an adequate time frame for dental management. This audit will also examine the dental diseases present and the treatments required pre-radiotherapy. Methods: Data for this audit was collected over 4 months in 2012
by analysing the dental charts and referrals of new patients who were referred to and attended the dental head and neck oncology clinic. A standardised referral pro-forma was introduced from September 2013 to improve the referral process.
A re-audit was conducted over 4 months in 2014. Data was collected similarly as previous. The time period between dental assessment and commencement of radiotherapy was examined. The presence of dental disease and subsequent treatments required were also noted.
Results: 63 new patients were examined in the dental head and neck oncology clinic over 4 months in 2012. 48 (76.2%) were examined pre-radiotherapy. The average length of time between dental assessment and radiotherapy commencement was 11 days. A new standardised referral pro-forma was introduced in 2013. In the re-audit, 65 new patients were seen over 4 months in 2014.
60 (92.3%) patients were examined pre-radiotherapy. The average length of time between dental assessment and radiotherapy commencement was 18 days.
Conclusion: Given the high prevalence of pre-existing dental disease amongst head and neck cancer patients, prompt dental assessment and treatment is vital. Efforts aimed at improving the care pathway are on-going through the implementation of a mandatory referral pro-forma and a dedicated assessment clinic.

Extreme Loads on an Oscillating Wave Surge Converter

A major difficulty in the design of full scale Wave Energy Converters is the need to design for two conflicting design criteria. In one instance devices must be designed to couple heavily to the incident wave force resulting in the efficient extraction of energy in small sea states, however devices must also be capable of withstanding the harsh conditions encountered during extreme seas. This paper presents an initial investigation of the extreme wave loading of a generic, surface-piercing, pitching flap-type device deployed in near shore wave conditions. Slamming of the flap is selected as the extreme load event for further investigation and the experimental methodologies employed are described. Preliminary results showing both local and global loading under such events are presented for the case of a flap tested in a 3-dimensional environment. Results are presented which show flap slamming effects on the pressures experienced on the front face of the flap.

Pre-Processing Power Traces with a Phase-Sensitive Detector

As cryptographic implementations are increasingly subsumed as functional blocks within larger systems on chip, it becomes more difficult to identify the power consumption signatures of cryptographic operations amongst other unrelated processing activities. In addition, at higher clock frequencies, the current decay between successive processing rounds is only partial, making it more difficult to apply existing pattern matching techniques in side-channel analysis. We show however, through the use of a phase-sensitive detector, that power traces can be pre-processed to generate a filtered output which exhibits an enhanced round pattern, enabling the identification of locations on a device where encryption operations are occurring and also assisting with the re-alignment of power traces for side-channel attacks.