Effect of cooking method and rice type on arsenic concentration in cooked rice and the estimation of arsenic dietary intake in a rural village in West Bengal, India

Arsenic (As) contamination of rice plants can result in high total As concentrations (t-As) in cooked rice, especially if As-contaminated water is used for cooking. This study examines two variables: (1) the cooking method (water volume and inclusion of a washing step); and (2) the rice type (atab and boiled). Cooking water and raw atab and boiled rice contained 40 g As l-1 and 185 and 315 g As kg-1, respectively. In general, all cooking methods increased t-As from the levels in raw rice; however, raw boiled rice decreased its t-As by 12.7% when cooked by the traditional method, but increased by 15.9% or 23.5% when cooked by the intermediate or contemporary methods, respectively. Based on the best possible scenario (the traditional cooking method leading to the lowest level of contamination, and the atab rice type with the lowest As content), t-As daily intake was estimated to be 328 g, which was twice the tolerable daily intake of 150 g.

Contribution of water and cooked rice to an estimation of the dietary intake of inorganic arsenic in a rural village of West Bengal, India

Arsenic contamination of rice plants by arsenic-polluted irrigation groundwater could result in high arsenic concentrations in cooked rice. The main objective of the study was to estimate the total and inorganic arsenic intakes in a rural population of West Bengal, India, through both drinking water and cooked rice. Simulated cooking of rice with different levels of arsenic species in the cooking water was carried out. The presence of arsenic in the cooking water was provided by four arsenic species (arsenite, arsenate, methylarsonate or dimethylarsinate) and at three total arsenic concentrations (50, 250 or 500 mu g l(-1)). The results show that the arsenic concentration in cooked rice is always higher than that in raw rice and range from 227 to 1642 mu g kg(-1). The cooking process did not change the arsenic speciation in rice. Cooked rice contributed a mean of 41% to the daily intake of inorganic arsenic. The daily inorganic arsenic intakes for water plus rice were 229, 1024 and 2000 mu g day(-1) for initial arsenic concentrations in the cooking water of 50, 250 and 500 g arsenic l(-1), respectively, compared with the tolerable daily intake which is 150 mu g day(-1).

Effect of two different rice dehusking procedures on total arsenic concentration in rice

Pollution of subterranean water by arsenic (As) in Asia has resulted in the worst chemical disaster in human history. For populations living on subsistence rice diets, As contamination of rice grain contributes greatly to dietary As exposure. The main objectives of this study were to compare two dehusking processes: (a) wet process (soaking of rice, boiling and mechanical hulling) and (b) dry process (mechanical hulling), and recommend the method leading to a lower As content in commercial rice. In general, hulling of paddy rice (373 mu g As kg(-1)) significantly decreased As content in rice grain (311 mu g As kg(-1)). The final As concentrations in boiled rice (final product of the wet process) and atab rice (dry process) were 332 and 290 mu g kg(-1). Thus, the dry method is recommended for dehusking paddy rice if not As-free water is available. However, villagers can reduce the As content in the wet system by discarding the soaking water and using new water for the light boiling. Finally, it is not recommended to use rice husk for feeding animals because the As concentration is very high, approximately 1,000 mu g As kg(-1).

Traces of Peter Rice

A review of the events comprising Peter Rice at Queen's including the Traces of Peter Rice Exhibition at the Naughton Gallery

Intellectual Property and the EU’s Deep Trade Agenda

The EU is considered to be one of the main proponents of what has been called the deep trade agenda—that is, the push for further trade liberalization with an emphasis on the removal of domestic non-tariff regulatory measures affecting trade, as opposed to the traditional focus on the removal of trade barriers at borders. As negotiations on the Doha Development Round have stalled, the EU has attempted to achieve these aims by entering into comprehensive free trade agreements (FTAs) that are not only limited exclusively to tariffs but also extend to non-tariff barriers, including services, intellectual property rights (IPRs), competition, and investment. These FTAs place great emphasis on regulatory convergence as a means to secure greater market openings. The paper examines the EU's current external trade policy in the area of IP, particularly its attempts to promote its own regulatory model for the protection of IP rights through trade agreements. By looking at the IP enforcement provisions of such agreements, the article also examines how the divisive issues that are currently hindering the progress of negotiations at WTO level, including the demands from developing countries to maintain a degree of autonomy in the area of IP regulation as well as the need to balance IP protection with human rights protection, are being dealt with in recent EU FTAs.

Trade-offs between personal immunity and reproduction in the burying beetle, Nicrophorus vespilloides

How are resources split between caring for offspring and self-maintenance? Is the timing of immune challenge important? In burying beetles challenging the immune system prior to breeding does not affect the total number and quality of offspring produced during the individual's lifetime. However, the immune system is suppressed during breeding and if an immune challenge is presented during this time the beetle will upregulate its immune system, but at the detriment to the number of offspring produced during that breeding opportunity.We know that parental investment and immune investment are costly processes, but it is unclear which trait will be prioritized when both may be required. Here, we address this question using the burying beetle Nicrophorus vespilloides, carrion breeders that exhibit biparental care of young. Our results show that immunosuppression occurs during provision of parental care. We measured phenoloxidase (PO) on Days 1-8 of the breeding bout and results show a clear decrease in PO immediately from presentation of the breeding resource onward. Having established baseline immune investment during breeding we then manipulated immune investment at different times by applying a wounding challenge. Beetles were wounded prior to and during the parental care period and reproductive investment quantified. Different effects on reproductive output occur depending on the timing of wounding. Challenging the immune system with wounding prior to breeding does not affect reproductive output and subsequent lifetime reproductive success (LRS). LRS is also unaffected by applying an immune elicitor prior to breeding, though different arms of the immune system are up/downregulated, perhaps indicating a trade-off between cellular and humoral immunity. In contrast, wounding during breeding reduces reproductive output and to the greatest extent if the challenge is applied early in the breeding bout. Despite being immunosuppressed, breeding beetles can still respond to wounding by increasing PO, albeit not to prebreeding levels. This upregulation of PO during breeding may affect parental investment, resulting in a reduction in reproductive output. The potential role of juvenile hormone in controlling this trade-off is discussed.

Urinary excretion of arsenic following rice consumption

Patterns of arsenic excretion were followed in a cohort (n = 6) eating a defined rice diet, 300 g per day d.wt. where arsenic speciation was characterized in cooked rice, following a period of abstinence from rice, and other high arsenic containing foods. A control group who did not consume rice were also monitored. The rice consumed in the study contained inorganic arsenic and dimethylarsinic acid (DMA) at a ratio of 1:1, yet the urine speciation was dominated by DMA (90%). At steady state (rice consumption/urinary excretion) similar to 40% of rice derived arsenic was excreted via urine. By monitoring of each urine pass throughout the day it was observed that there was considerable variation (up to 13-fold) for an individual's total arsenic urine content, and that there was a time dependent variation in urinary total arsenic content. This calls into question the robustness of routinely used first pass/spot check urine sampling for arsenic analysis. (C) 2014 Elsevier Ltd. All rights reserved.

Lead in rice: Analysis of baseline lead levels in market and field collected rice grains

In a large scale survey of rice grains from markets (13 countries) and fields (6 countries), a total of 1578 rice grain samples were analysed for lead. From the market collected samples, only 0.6% of the samples exceeded the Chinese and EU limit of 0.2 μg g− 1 lead in rice (when excluding samples collected from known contaminated/mine impacted regions). When evaluating the rice grain samples against the Food and Drug Administration's (FDA) provisional total tolerable intake (PTTI) values for children and pregnant women, it was found that only people consuming large quantities of rice were at risk of exceeding the PTTI from rice alone. Furthermore, 6 field experiments were conducted to evaluate the proportion of the variation in lead concentration in rice grains due to genetics. A total of 4 of the 6 field experiments had significant differences between genotypes, but when the genotypes common across all six field sites were assessed, only 4% of the variation was explained by genotype, with 9.5% and 11% of the variation explained by the environment and genotype by environment interaction respectively. Further work is needed to identify the sources of lead contamination in rice, with detailed information obtained on the locations and environments where the rice is sampled, so that specific risk assessments can be performed.

Localized Flux Maxima of Arsenic, Lead, and Iron around Root Apices in Flooded Lowland Rice

In wetland-adapted plants, such as rice, it is typically root apexes, sites of rapid entry for water/nutrients, where radial oxygen losses (ROLs) are highest. Nutrient/toxic metal uptake therefore largely occurs through oxidized zones and pH microgradients. However, the processes controlling the acquisition of trace elements in rice have been difficult to explore experimentally because of a lack of techniques for simultaneously measuring labile trace elements and O2/pH. Here, we use new diffusive gradients in thin films (DGT)/planar optode sandwich sensors deployed in situ on rice roots to demonstrate a new geochemical niche of greatly enhanced As, Pb, and Fe(II) mobilization into solution immediately adjacent to the root tips characterized by O2 enrichment and low pH. Fe(II) mobilization was congruent to that of the peripheral edge of the aerobic root zone, demonstrating that the Fe(II) mobilization maximum only developed in a narrow O2 range as the oxidation front penetrates the reducing soil. The Fe flux to the DGT resin at the root apexes was 3-fold higher than the anaerobic bulk soil and 27 times greater than the aerobic rooting zone. These results provide new evidence for the importance of coupled diffusion and oxidation of Fe in modulating trace metal solubilization, dispersion, and plant uptake.

HERQULES:System level cross-layer design exploration for efficient energy-quality trade-offs

In this paper, we present a unique cross-layer design framework that allows systematic exploration of the energy-delay-quality trade-offs at the algorithm, architecture and circuit level of design abstraction for each block of a system. In addition, taking into consideration the interactions between different sub-blocks of a system, it identifies the design solutions that can ensure the least energy at the "right amount of quality" for each sub-block/system under user quality/delay constraints. This is achieved by deriving sensitivity based design criteria, the balancing of which form the quantitative relations that can be used early in the system design process to evaluate the energy efficiency of various design options. The proposed framework when applied to the exploration of energy-quality design space of the main blocks of a digital camera and a wireless receiver, achieves 58% and 33% energy savings under 41% and 20% error increase, respectively. © 2010 ACM.

Enabling Complexity-Performance Trade-Offs for Successive Cancellation Decoding of Polar Codes

Polar codes are one of the most recent advancements in coding theory and they have attracted significant interest. While they are provably capacity achieving over various channels, they have seen limited practical applications. Unfortunately, the successive nature of successive cancellation based decoders hinders fine-grained adaptation of the decoding complexity to design constraints and operating conditions. In this paper, we propose a systematic method for enabling complexity-performance trade-offs by constructing polar codes based on an optimization problem which minimizes the complexity under a suitably defined mutual information based performance constraint. Moreover, a low-complexity greedy algorithm is proposed in order to solve the optimization problem efficiently for very large code lengths.

Design methodology to trade off power, output quality and error resiliency: Application to color interpolation filtering

Power dissipation and tolerance to process variations pose conflicting design requirements. Scaling of voltage is associated with larger variations, while Vdd upscaling or transistor up-sizing for process tolerance can be detrimental for power dissipation. However, for certain signal processing systems such as those used in color image processing, we noted that effective trade-offs can be achieved between Vdd scaling, process tolerance and "output quality". In this paper we demonstrate how these tradeoffs can be effectively utilized in the development of novel low-power variation tolerant architectures for color interpolation. The proposed architecture supports a graceful degradation in the PSNR (Peak Signal to Noise Ratio) under aggressive voltage scaling as well as extreme process variations in. sub-70nm technologies. This is achieved by exploiting the fact that some computations are more important and contribute more to the PSNR improvement compared to the others. The computations are mapped to the hardware in such a way that only the less important computations are affected by Vdd-scaling and process variations. Simulation results show that even at a scaled voltage of 60% of nominal Vdd value, our design provides reasonable image PSNR with 69% power savings.

Regulating Services Trade Agreements - A Comparative Analysis of Regulatory Disciplines Included in EU and US Free Trade Agreements

Developed countries, led by the EU and the US, have consistently called for ‘deeper integration’ over the course of the past three decades i.e., the convergence of ‘behind-the-border’ or domestic polices and rules such as services, competition, public procurement, intellectual property (“IP”) and so forth. Following the collapse of the Doha Development Round, the EU and the US have pursued this push for deeper integration by entering into deep and comprehensive free trade agreements (“DCFTAs”) that are comprehensive insofar as they are not limited to tariffs but extend to regulatory trade barriers. More recently, the EU and the US launched negotiations on a Transatlantic Trade and Investment Partnership (“TTIP”) and a Trade in Services Agreement (“TISA”), which put tackling barriers resulting from divergences in domestic regulation in the area of services at the very top of the agenda. Should these agreements come to pass, they may well set the template for the rules of international trade and define the core features of domestic services market regulation. This article examines the regulatory disciplines in the area of services included in existing EU and US DCFTAs from a comparative perspective in order to delineate possible similarities and divergences and assess the extent to which these DCFTAs can shed some light into the possible outcome and limitations of future trade negotiations in services. It also discusses the potential impact of such negotiations on developing countries and, more generally, on the multilateral process.