Development of Novel Post-Tensioned Glulam Timber Composites

Improvements in the structural performance of glulam timber beams by the inclusion of reinforcing materials can increase both the service performance and ultimate capacity. In recent years research focusing on the addition of fibre reinforced polymers (FRP) to strengthen members has yielded positive results. However, the FRP material is still relatively expensive and its full potential in combination with structural timber has not been realised. This paper describes a series of four-point bending tests that were conducted, under service loads and to failure, on unreinforced, reinforced and post-tensioned glulam timber beams, where the reinforcing tendon used was 12mm diameter basalt fibre reinforced polymer (BFRP). The research was designed to evaluate the benefits offered by including an active reinforcement in contrast to the passive reinforcement typically used within timber strengthening works, in addition to establishing the affect that bonding the reinforcing tendon has on the material’s performance. Further experimental tests have been developed to investigate the long-term implications of this research, with emphasis placed upon creep and loss of post-tensioning.
The laboratory investigations established that the flexural strength and stiffness increased for both the unbonded and bonded post-tensioned timbers compared to the unreinforced beams. Timber that was post-tensioned with an unbonded BFRP tendon showed a flexural strength increase of 2.8% and an increase in stiffness of 8.7%. Post-tensioned beams with a bonded BFRP tendon showed increases in flexural strength and stiffness of 16.6% and 11.5% respectively.

Influence of embedded length on strength of BFRP rods bonded parallel to the grain in low grade timber by pullout-bending tests

Bonded-in rod connections in timber possess many desirable attributes in terms of efficiency, manufacture, performance, aesthetics and cost. In recent years research has been conducted on such connections using fibre reinforced polymers (FRPs) as an alternative to steel. This research programme investigates the pull-out capacity of Basalt FRP rods bonded-in in low grade Irish Sitka Spruce. Embedded length is thought to be the most influential variable contributing to pull- out capacity of bonded-in rods after rod diameter. Previous work has established an optimum embedded length of 15 times the hole diameter. However, this work only considered the effects of axial stress on the bond using a pull-compression testing system which may have given an artificially high pull out capacity as bending effects were neglected. A hinge system was utilised that allows the effects of bending force to be taken in to consideration along with axial forces in a pull-out test. This paper describes an experimental programme where such pull-bending tests were carried out on samples constructed of 12mm diameter BFRP bars with a 2mm glueline thickness and embedded lengths between 80mm and 280mm bonded-in to low-grade timber with an epoxy resin. Nine repetitions of each were tested. A clear increase in pull-out strength was found with increasing embedded length.

Strengthening of timber structures with glued-in rods

The research and development of connecting and strengthening timber structural elements with glued-inrods (GiR) has been ongoing since the 1980s. Despite many successful applications in practice, agreement regarding design criteria has not been reached. This state-of-the-art review summarises results from both research and practical applications regarding connections and reinforcement with GiR. The review considers manufacturing methods, mechanisms and parameters governing the performance and strength of GiR, theoretical approaches to estimate their load-bearing capacity and existing design recommendations.

The Distribution and Adoption of the Byre-house (Longhouse) in Late Medieval Britain

It has long been recognized that the byre-house or longhouse, in which animals and humans lived in the same building and with direct contact, was a distinctive building plan. Earlier interpretations have seen it as a ubiquitous house type found throughout Britain, but gradually replaced by separate buildings for keeping animals and accommodating humans. More recent work has suggested that it was a regional variant of the common late medieval domestic plan. The use of this building type was restricted to parts of Wales, and northern and western areas of England. It is argued that the introduction of the byre-house occurs mainly in the thirteenth century as part of a wider trend to provide accommodation for livestock during the winter months. The byre-house was a one response to this need, and its adoption was not due to climatic or geographical factors. Instead, it is interpreted as reflecting localized cultural attitudes to the relationship between humans and animals.

Marine or estuarine radiocarbon reservoir corrections for mollusks? A case study from a medieval site in the south of England

Mollusk shells are frequently radiocarbon dated and provide reliable calibrated age ranges when the regional marine reservoir correction is well-established. For mollusks from an estuarine environment the reservoir correction may be significantly different than the regional marine reservoir correction due to the input of bedrock or soil derived carbonates. Some mollusk species such as oysters are tolerant of a significant range of salinities which makes it difficult to determine which reservoir correction is appropriate. A case study is presented of an anomalous radiocarbon age for an oyster shell paint dish found in the fabric of the ruined nave walls of St Mary's Church, Shoreham-by-Sea, West Sussex, England. Stable isotopes (delta O-18 and delta C-13) were used to establish the type of environment in which the oyster had lived. Paired marine and terrestrial samples from a nearby medieval site were radiocarbon dated to provide an appropriate reservoir correction.

A silent witness? Medieval urban landscapes and unfolding their mapping histories

This paper offers a critical reflection on the place of maps in writing medieval urban histories. Using findings from recent research on medieval Swansea, the case is made that mapping provides an interpretative space for exploring alternative narratives about past places. To do so the paper draws upon current critical debates on cartography, particularly the idea that mapping is fluid and iterative, to suggest that Swansea's medieval urban origins are open to a range of alternative interpretations. This approach to mapping differs from that often used by historians to map medieval urban landscapes, where historic maps are simply used as ‘sources’, and the landscapes they represent used as ‘witnesses’ to past events, for creating maps, both through digital and analogue media, instead opens up – or unfolds – a landscape's past. The paper uses past attempts to map medieval Swansea to highlight difficulties in interpreting its urban landscape features, and uses multiple mappings of the medieval townscape, resulting from recent research, to question how far any sources about the past really provide a coherent narrative. Instead, multiple mappings of the medieval urban landscape – reflecting different and competing perspectives – are more attuned with how places were perceived and understood during the Middle Ages.

The Science of a Lost Medieval Graveyard: The Ballyhanna Research Project

he Science of Lost Medieval Gaelic Graveyard tells the story of the discovery in 2003 of a graveyard and the foundations of a small forgotten stone church at Ballyhanna, in Ballyshannon, Co. Donegal, as part of the N15 Bundoran–Ballyshannon Bypass archaeological works. This led to the excavation of one of the largest collections of medieval burials ever undertaken on this island. Over 1,200 individuals were excavated from the site at Ballyhanna during the winter of 2003–4, representing 1,000 years of burial through the entire Irish medieval period. The discovery led to the establishment of a cross-border research collaboration—the Ballyhanna Research Project—between Queen’s University Belfast and the Institute of Technology, Sligo, which has brought to life this lost Gaelic graveyard.

This book shows how cutting-edge scientific research may aid our understanding and interpretation of archaeology and reveal new insights into past societies. For example, the use of ancient DNA analysis represented the first biomolecular archaeological evaluation of a medieval population to date and provided evidence that cystic fibrosis was much less prevalent in the medieval period than today. The Science of Lost Medieval Gaelic Graveyard is about a community who lived in Gaelic Ireland, about their lifestyles, health and diet. It tells us of their deaths and of their burial traditions, and through examining all of these aspects, it reveals the ebb and flow of their lives.

The book is accompanied by a CD-ROM which includes supplementary information from the Ballyhanna Research Project and the original excavation and survey reports for all of the archaeological sites on the N15 Bundoran–Ballyshannon Bypass.

FRP reinforcement of timber structures

Timber engineering has advanced over recent decades to offer an alternative to traditional materials and methods. The bonding of fibre reinforced plastics (FRP) with adhesives to timber structures for repair and strengthening has many advantages. However, the lack of established design rules has strongly restrained the use of FRP strengthening in many situations, where these could be a preferable option to most traditional techniques. A significant body of research has been carried out in recent years on the performance of FRP reinforced timber and engineered wood products. This paper gives a State of the Art summary of material formulations, application areas, design approaches and quality control issues for practical engineers to introduce on-site bonding of FRP to timber as a new way in design for structural repair and rehabilitation.