A proposed method for evaluating the artisanal production of recycled plastic paving blocks in West Africa

Plastic wastes, and particularly plastic bags and sachets, are a major concern for urban and rural environment in African countries. In the last years some actions have been started for the plastic recycling like the artisanal production of paving blocks with melted plastic bags and sand, albeit with differences in production processes. Nevertheless, the environmental and economic impact of such activities is still to be confirmed. The aim of this study is to propose a methodology for assessing and comparing the environmental and energetic performances of artisanal methods, and for defining the overall quality of the produced blocks. This methodology has been shaped through the analysis of
production processes operated by artisans/small enterprises in West Africa and through physic-mechanical tests on the blocks. A questionnaire which allows an insight into the process and on the product has been developed and tested over five processes. Results show that a high input energy level is observed through all the processes, while considerable savings of energy could be achieved. Moreover, tests results confirmed the importance of the utilised plastic concerning thermal dilatation, mechanical resistance at higher temperature and cooling-shrinkage effects. In conclusion, doubts remain about the technical and environmental effectiveness of the sampled experiences, durability of the products and sustainability of this approach. Nevertheless, being the collection and recycling of plastic wastes a potential income generation activity for marginalised social groups in urban environment, a process optimisation could improve the impact of blocks production. Alternative recycling activities should also be considered.

Pull-out behaviour of steel grid soil reinforcement embedded in silty sand

This paper investigates the pull-out behaviour (particularly the bearing resistance) of a steel grid reinforcement embedded in silty sand using laboratory tests and numerical analyses. It is demonstrated that the various common analytical equations for calculating the bearing component of pull-out resistance give a wide range of calculated values, up to about 200% disparity. The disparity will increase further if the issue of whether to use the peak or critical state friction angle is brought in. Furthermore, these equations suggest that the bearing resistance factor, N, is only a function of soil friction angle which is not consistent with some design guidelines. In this investigation, a series of large scale laboratory pull-out tests under different test pressures were conducted. The test results unambiguously confirmed that the N factor is a function of test pressure. A modified equation for calculating N is also proposed. To have more in-depth understanding of the pull-out behaviour, the tests were modelled numerically. The input parameters for the numerical analysis were obtained from laboratory triaxial tests. The analysis results were compared with the experimental results. Good agreement between experimental and numerical results was achieved if the strain-softening behaviour from peak strength to critical state condition was captured by the soil model used. © 2013 Elsevier Ltd.

Engineering Innovative Products: A Practical Experience

Engineering Innovative Products: A Practical Experience is a pioneering book that will be of key use to senior undergraduate and graduate engineering students who are being encouraged to explore innovation and commercialization as part of their courses. The book will teach the essential skills of entrepreneurship and address the fundamental requirements needed to establish a successful technology company.

Beyond HIV microbicides: multipurpose prevention technology (MPT) products

Multi-purpose prevention technologies (MPTs) that aim to simultaneously prevent unintended pregnancy, human immunodeficiency virus type 1 (HIV-1) infection and other sexually transmitted infections (STIs) are among the most innovative and complex products currently in development within women’s sexual and reproductive healthcare. In this review article, MPTs are placed within the wider context of combination products, combination drug products and multi-indication products. The current MPT product landscape is mapped and assessed with reference to existing products for the corresponding single indications, before identifying the gaps in the current MPT product pipeline and highlighting priority products and challenges moving forward.

Note. Speciation of arsenic in licorice confectionery products and estimation of health risks

Total-arsenic (T-As) and arsenic (As) species were determined by HPLC-HG-AAS in ten different confectionery products: nine throat pearls and an industrial licorice extract. The Spanish legislation sets a maximum total-As content in confectionery products at 0.1 mu g/g. T-As concentrations were above the permitted maximum limit (mean of 0.219 +/- 0.008 mu g/g). All As was present in the form of toxic inorganic species. The daily consumption of licorice-confections in Spain is 1.1 g and leads to a daily intake of inorganic-As of 0.23 mu g (0.2% of the tolerable daily intake of inorganic As for a teenager). These experimental results proved that even though high total-As concentrations were found in licorice throat pearls and that all the As found was present as inorganic species, no significant risks for health are expected just by considering this As source.

Risk minimization in logistic processes with oil products

13.Vidovic M., Miljus M., Vlajic J., (2002), "Risk minimization in logistic processes with oil products", Proceedings of the 6th International Conference on Traffic Science, ICTS 2002, Portorož, Slovenia, pp. 568-577;

Expansion of pulse responses from temporal analysis of products (TAP) pulse responses for more accurate data analysis

TAP pulse responses are normally analysed using moments, which are integrals of the full TAP pulse response. However, in some cases the entire pulse response may not be recorded due to technical reasons, thereby compromising any data analysis due to moments generated from incomplete pulse responses. The current work discloses the development of a function which mathematically expands the tail of a TAP pulse response, so that the TAP data analysis can be accurately conducted. This newly developed analysis method has been applied to the oxidative dehydrogenation of ethane over Co–Cr–Sn–WOx/α-Al2O3 and Co–Cr–Sn–WOx/α-Al2O3 catalysts as a case study.

Tunnel spoil classification and applicability of lime addition in weak formations for muck reuse

Tunnel construction planning requires careful consideration of the spoil management part, as this involves environmental, economic and legal requirements. In this paper a methodological approach that considers the interaction between technical and geological factors in determining the features of the resulting muck is proposed. This gives indications about the required treatments as well as laboratory and field characterisation tests to be performed to assess muck recovery alternatives. While this reuse is an opportunity for excavations in good quality homogeneous grounds (e.g. granitic mass), it is critical for complex formation. This approach has been validated, at present, for three different geo-materials resulting from a tunnel excavation carried out with a large diameter Earth Pressure Balance Shield (EPB) through a complex geological succession. Physical parameters and technological features of the three materials have been assessed, according to their valorisation potential, for defining re-utilisation patterns. The methodology proved to be effective and the laboratory tests carried out on the three materials allowed the suitability and treatment effectiveness for each muck recovery strategy to be defined. © 2014 Elsevier Ltd.

Alkali Activated Fuel Ash and Slag Mixes:Optimization Study from Mortars to Concrete Building Blocks

Alkali activated binders, based on ash and slag, also known as geopolymers, can play a key role in reducing the carbon footprint of the construction sector by replacing ordinary Portland cement in some concretes. Since 1970s, research effort has been ongoing in many research institutions. In this study, pulverized fuel ash (PFA) from a UK power plant, ground granulated blast furnace slag (GGBS) and combinations of the two have been investigated as geopolymer binders for concrete applications. Activators used were sodium hydroxide and sodium silicate solutions. Mortars with sand/binder ratio of 2.75 with several PFA and GGBS combinations have been mixed and tested. The optimization of alkali dosage (defined as the Na2O/binder mass ratio) and modulus (defined as the Na2O/SiO2 mass ratio) resulted in strengths in excess of 70 MPa for tested mortars. Setting time and workability have been considered for the identification of the best combination of PFA/GGBS and alkali activator dosage for different precast concrete products. Geopolymer concrete building blocks have been replicated in laboratory and a real scale factory trial has been successfully carried out. Ongoing microstructural characterization is aiming to identify reaction products arising from PFA/GGBS combinations.

Assessment of commercial sand barge radar for detecting overwintering diving ducks at Lough Neagh

Overwintering diving ducks at Lough Neagh have declined dramatically in recent years, but it has been suggested that on-to-offshore redistribution may have led to an underestimate of numbers. Most species feed nocturnally and their distribution at night is unknown. We used radar and visual observations from on board commercial sand barges to determine the diurnal distribution of diving duck flocks in an effort to assess the feasibility of using standard
boat-mounted radar to describe their nocturnal feeding distribution. Sand barge radar was poor in identifying flocks compared to independent visual observations as it was sensitive to interference by waves during windy conditions. However, visual observations were useful in describing diurnal distribution. Sand barges were on average 1.5km from shore when a flock of diving ducks was observed and the probability of detection declined with distance from shore. This supports the reliability of shore-based counts in monitoring and surveillance. Given the poor performance of commercially available boatmounted radar systems, we recommend the use of specialised terrestrial Bird Detecting Radar to determine the movements of diving ducks at Lough Neagh.

Inorganic arsenic in rice-based products for infants and young children

Inorganic arsenic (As_i) is a chronic, non-threshold carcinogen. Rice and rice-based products can be the major source of As_i for many subpopulations. Baby rice, rice cereals and rice crackers are widely used to feed infants and young children. The As_i concentration in rice-based products may pose a health risk for infants and young children. As_i concentration was determined in rice-based products produced in the European Union and risk assessment associated with the consumption of these products by infants and young children, and compared to an identical US FDA survey. There are currently no European Union or United States of America regulations applicable to As_i in food. However, this study suggests that the samples evaluated may introduce significant concentration of As_i into infants’ and young children’s diets. Thus, there is an urgent need for regulatory limits on As_i in food, especially for baby rice-based products.

Operator Synthesis and Tensor Products

We show that Kraus' property $ S_{\sigma }$ is preserved under taking weak* closed sums with masa-bimodules of finite width and establish an intersection formula for weak* closed spans of tensor products, one of whose terms is a masa-bimodule of finite width. We initiate the study of the question of when operator synthesis is preserved under the formation of products and prove that the union of finitely many sets of the form $ \kappa \times \lambda $, where $ \kappa $ is a set of finite width while $ \lambda $ is operator synthetic, is, under a necessary restriction on the sets $ \lambda $, again operator synthetic. We show that property $ S_{\sigma }$ is preserved under spatial Morita subordinance.

Tensor products of subspace lattices and rank one density

We show that, if M is a subspace lattice with the property that the rank one subspace of its operator algebra is weak* dense, L is a commutative subspace lattice and P is the lattice of all projections on a separable Hilbert space, then L⊗M⊗P is reflexive. If M is moreover an atomic Boolean subspace lattice while L is any subspace lattice, we provide a concrete lattice theoretic description of L⊗M in terms of projection valued functions defined on the set of atoms of M . As a consequence, we show that the Lattice Tensor Product Formula holds for AlgM and any other reflexive operator algebra and give several further corollaries of these results.

Bricks vs. clicks: Which is better for marketing remanufactured products?

The economical and environmental benefits are the central issues for remanufacturing. Whereas extant remanufacturing research focuses primarily on such issues in remanufacturing technologies, production planning, inventory control and competitive strategies, we provide an alternative yet somewhat complementary approach to consider both issues related to different channels structures for marketing remanufactured products. Specifically, based on observations from current practice, we consider a manufacturer sells new units through an independent retailer but with two options for marketing remanufactured products: (1) marketing through its own e-channel (Model M) or (2) subcontracting the marketing activity to a third party (Model 3P). A central result we obtain is that although Model M is always greener than Model 3P, firms have less incentive to adopt it because both the manufacturer and retailer may be worse off when the manufacturer sells remanufactured products through its own e-channel rather than subcontracting to a third party. Extending both models to cases in which the manufacturer interacts with multiple retailers further reveals that the more retailers in the market, the greener Model M relative to Model 3P.

Density Functional Study on Reaction Activity of Steam Decomposition Products Adsorbed on Carbonaceous Surface

A systematic theoretical study on the adsorption of steam and its thermal decomposition products on carbon both zigzag and armchair surface was performed to provide molecular-level understanding of the reaction activity of all these reactants in biomass steam gasification process. All the calculations were carried out using density functional theory (DFT) at the B3LYP/6-31+g(d,p) level. The structures of carbonaceous surfaces, all reactants and surface complexes were optimized and characterized. Based on the value of adsorption heat been obtained from the calculation, the activity of all reactants can be ordered as: O > O2 >H2 >H >OH >H2O for both zigzag and armchair surface, and the adsorption style is physisorption to water molecule and chemisorption to the other dissociated components.