Improved model for interfacial stresses accounting for the effect of shear deformation in plated beams

A significant increase in strength and performance of reinforced concrete, timber and metal beams may be achieved by adhesively bonding a fibre reinforced polymer composite, or metallic such as steel plate to the tension face of a beam. One of the major failure modes in these plated beams is the debonding of the plate from the original beam in a brittle manner. This is commonly attributed to the interfacial stresses between the adherends whose quantification has led to the development of many analytical solutions over the last two decades. The adherends are subjected to axial, bending and shear deformations. However, most analytical solutions have neglected the effect of shear deformation in adherends. Few solutions consider this effect approximately but are limited to one or two specific loading conditions. This paper presents a more rigorous solution for interfacial stresses in plated beams under an arbitrary loading with the shear deformation of the adherends duly considered in closed form using Timoshenko’s beam theory. The solution is general to linear elastic analysis of prismatic beams of arbitrary cross section under arbitrary loading with a plate of any thickness bonded either symmetrically or asymmetrically with respect to the span of the beam.

Towards an Improved Phasor Measurement Unit Data Communications Framework

This paper discusses a proposed new communications framework for phasor measurement units (PMU) optimized for use on wide area networks. Traditional PMU telecoms have been optimized for use in environments where bandwidth is restricted. The new method takes the reliability of the telecommunications medium into account and provides guaranteed delivery of data whilst optimizing for realtime delivery of the most current data. Other important aspects, such as security, are also considered.

Accumulating research: a systematic account of how cumulative meta-analyses would have provided knowledge, improved health, reduced harm and saved resources

BACKGROUND: "Cumulative meta-analysis" describes a statistical procedure to calculate, retrospectively, summary estimates from the results of similar trials every time the results of a further trial in the series had become available. In the early 1990 s, comparisons of cumulative meta-analyses of treatments for myocardial infarction with advice promulgated through medical textbooks showed that research had continued long after robust estimates of treatment effects had accumulated, and that medical textbooks had overlooked strong, existing evidence from trials. Cumulative meta-analyses have subsequently been used to assess what could have been known had new studies been informed by systematic reviews of relevant existing evidence and how waste might have been reduced.

METHODS AND FINDINGS: We used a systematic approach to identify and summarise the findings of cumulative meta-analyses of studies of the effects of clinical interventions, published from 1992 to 2012. Searches were done of PubMed, MEDLINE, EMBASE, the Cochrane Methodology Register and Science Citation Index. A total of 50 eligible reports were identified, including more than 1,500 cumulative meta-analyses. A variety of themes are illustrated with specific examples. The studies showed that initially positive results became null or negative in meta-analyses as more trials were done; that early null or negative results were over-turned; that stable results (beneficial, harmful and neutral) would have been seen had a meta-analysis been done before the new trial; and that additional trials had been much too small to resolve the remaining uncertainties.

CONCLUSIONS: This large, unique collection of cumulative meta-analyses highlights how a review of the existing evidence might have helped researchers, practitioners, patients and funders make more informed decisions and choices about new trials over decades of research. This would have led to earlier uptake of effective interventions in practice, less exposure of trial participants to less effective treatments, and reduced waste resulting from unjustified research.

Improved shear strength model for FRP-strengthened RC beams accounting for adverse FRP-steel interaction

RC beams shear-strengthened with externally-bonded FRP side strips or U-strips usually fail by debonding. As such debonding occurs in a brittle manner at relatively small shear crack widths, some of the internal steel stirrups may not have reached yielding at beam shear failure. Consequently, the internal steel stirrups cannot be fully utilized. This adverse shear interaction between internal steel stirrups and external FRP strips may significantly reduce the benefit of shear-strengthening FRP but has not been considered by any of the existing FRP strengthening design guidelines. In this paper, an improved shear strength model capable of accounting for the effect of the above shear interaction is first presented, in which the unfavorable effect of shear interaction is reflected through a reduction factor (i.e. shear interaction factor). Using a large test database established in the present study, the performance of the proposed model as well as that of three other shear strength models is then assessed. This assessment shows that the proposed shear strength model performs better than the three existing models. The assessment also shows that the inclusion of the proposed shear interaction factor in the existing models can significantly improve their performance.

Improved Efficiency for Partial Oxidation of Methane by Controlled Copper Deposition on Surface-Modified ZSM-5

The mono(μ-oxo) dicopper cores present in the pores of Cu-ZSM-5 are active for the partial oxidation of methane to methanol. However, copper on the external surface reduces the ratio of active, selective sites to unselective sites. More efficient catalysts are obtained by controlling the copper deposition during synthesis. Herein, the external exchange sites of ZSM-5 samples were passivated by bis(trimethylsilyl) trifluoroacetamide (BSTFA) followed by calcination, promoting selective deposition of intraporous copper during aqueous copper ion exchange. At an optimum level of 1–2 wt % SiO2, IR studies showed a 64 % relative reduction in external copper species and temperature-programmed oxidation analysis showed an associated increase in the formation of methanol compared with unmodified Cu-ZSM-5 samples. It is, therefore, reported that the modified zeolites contained a significantly higher proportion of active, selective copper species than their unmodified counterparts with activity for partial methane oxidation to methanol.

An effective key generation system using improved channel reciprocity

In physical layer security systems there is a clear need to exploit the radio link characteristics to automatically generate an encryption key between two end points. The success of the key generation depends on the channel reciprocity, which is impacted by the non-simultaneous measurements and the white nature of the noise. In this paper, an OFDM subcarriers' channel responses based key generation system with enhanced channel reciprocity is proposed. By theoretically modelling the OFDM subcarriers' channel responses, the channel reciprocity is modelled and analyzed. A low pass filter is accordingly designed to improve the channel reciprocity by suppressing the noise. This feature is essential in low SNR environments in order to reduce the risk of the failure of the information reconciliation phase during key generation. The simulation results show that the low pass filter improves the channel reciprocity, decreases the key disagreement, and effectively increases the success of the key generation.

Improved lexicon-based sentiment analysis for social media analytics

Social media channels, such as Facebook or Twitter, allow for people to express their views and opinions about any public topics. Public sentiment related to future events, such as demonstrations or parades, indicate public attitude and therefore may be applied while trying to estimate the level of disruption and disorder during such events. Consequently, sentiment analysis of social media content may be of interest for different organisations, especially in security and law enforcement sectors. This paper presents a new lexicon-based sentiment analysis algorithm that has been designed with the main focus on real time Twitter content analysis. The algorithm consists of two key components, namely sentiment normalisation and evidence-based combination function, which have been used in order to estimate the intensity of the sentiment rather than positive/negative label and to support the mixed sentiment classification process. Finally, we illustrate a case study examining the relation between negative sentiment of twitter posts related to English Defence League and the level of disorder during the organisation’s related events.

All the World's a Stage: Facilitating Discovery Science and Improved Cancer Care through the Global Alliance for Genomics and Health

The recent explosion of genetic and clinical data generated from tumor genome analysis presents an unparalleled opportunity to enhance our understanding of cancer, but this opportunity is compromised by the reluctance of many in the scientific community to share datasets and the lack of interoperability between different data platforms. The Global Alliance for Genomics and Health is addressing these barriers and challenges through a cooperative framework that encourages "team science" and responsible data sharing, complemented by the development of a series of application program interfaces that link different data platforms, thus breaking down traditional silos and liberating the data to enable new discoveries and ultimately benefit patients.

Electron-impact excitation of Ar+: an improved determination of Ar impurity influx in tokamaks

Electron-impact scattering data for argon and its ions continue to be of interest in studies of magnetically confined plasmas. In an earlier paper, Griffin et al (1997 J. Phys. B: At. Mol. Opt. Phys. 30 3543) employed the results of 28-term and 40-term R-matrix calculations of electron-impact excitation in Ar+ to carry out a collisional-radiative modelling study of the impurity influx of argon in tokamaks. We have now completed a 452-term R-matrix with pseudo-states (RMPS) calculation of electron-impact excitation for Ar+ in order to provide more accurate excitation data; using these improved data, we have repeated the modelling studies presented in the earlier paper. We compare our excitation data, as well as the results of the collisional radiative calculations, with those arising from the 40-term R-matrix calculation and find significant differences.

Evaluation of an improved atomic data basis for carbon in UEDGE emission modeling for L-mode plasmas in DIII-D

New scaled carbon atomic electron-impact excitation data is utilized to evaluate comparisons between experimental measurements and fluid emission modeling of detached plasmas at DIII-D. The C I and C II modeled emission lines for 909.8 and 514.7 nm were overestimated by a factor of 10-20 than observed experimentally for the inner leg, while the outer leg was within a factor of 2. Due to higher modeled emissions, a previous study using the UEDGE code predicted that a higher amount of carbon was required to achieve a detached outboard divertor plasma in L-mode at DIII-D. The line emission predicted by using the new scaled carbon data yields closer results when compared against experiment. We also compare modeling and measurements of Dα emission from neutral deuterium against predictions from newly calculated R-Matrix with pseudostates data available at the ADAS database. © 2013 Published by Elsevier B.V.

Microneedle-mediated delivery of donepezil: Potential for improved treatment options in Alzheimer's disease

Transdermal drug delivery is an attractive route of drug administration, however there are relatively few marketed transdermal products. To increase delivery across the skin, strategies to enhance skin permeability are widely investigated, with microneedles demonstrating particular promise. Hydrogel-forming microneedles are inserted into the skin, and following dissolution of a drug loaded reservoir and movement of the drug through the created channels, the microneedle array is removed intact, and can then be readily and safely discarded. This study presents the formulation and evaluation of an integrated microneedle patch containing the Alzheimer's drug, donepezil hydrochloride. The integrated patch consisted of hydrogel-forming microneedles in combination with a donepezil hydrochloride containing film. Formulation and characterisation of plasticised films, prepared from poly(vinylpyrrolidone) or poly (methyl vinyl ether co-maleic anhydride/acid) (Gantrez(®)) polymers, is presented. Furthermore, in vitro permeation of donepezil hydrochloride across neonatal porcine skin from the patches was investigated, with 854.71 μg ± 122.71 μg donepezil hydrochloride delivered after 24 h, using the optimum patch formulation. Following administration of the patch to an animal model, plasma concentrations of 51.8 ± 17.6 ng/mL were obtained, demonstrating the success of this delivery platform for donepezil hydrochloride.