Concerto Grosso (working title) - a new work for soloists, brass band and electronics

As with Liminal Lines, this work explores the boundaries between distinct and contrasting musical genres. The use of live electronics within the brass band idiom is novel, particularly in relation to the use of sensors with brass band instruments.

SIW slot antenna for E-band communications

The paper proposes novel substrate integrated waveguide (SIW) slot antenna for E-band communications. The antenna is designed at a two-layer low temperature co-fired ceramic (LTCC) substrate in 71-76 GHz frequency band. The proposed antenna demonstrates a gain better than 11.3 dBi and efficiency of 85% and can be used as a standalone antenna or as an element of a larger array.

Circular polarisation frequency selective surface operating in Ku and Ka band

A double layer circular polarization (CP) frequency selective surface (FSS) for use as a dual-band quasi-optical diplexer suitable for deployment in reflector antenna systems is described. The FSS was designed to reflect Ku band signals (11.7–12.75 GHz) while transmitting Ka band signals (17.3–20.2 GHz) and conserving CP in each of these bands. The simulated/measured reflection loss over the Ku band was less than 0.05/0.1 dB for both TE and TM polarizations, while the simulated/measured axial ratio was less than 0.2/0.75 dB. Over the Ka band, the simulated/measured transmission loss for both polarizations was below 0.25/0.4 dB and the simulated/measured axial ratio was less than 0.25/0.75 dB. To the best of our knowledge, this is the first report of a metallo-dielectric FSS that simultaneously operates in CP for an oblique angle of incidence in both Ku and Ka bands.

M-L band x-rays (3-3.5 KeV) from palladium coated targets for isochoric radiative heating of thin foil samples

We describe experiments designed to produce a bright M-L band x-ray source in the 3-3.5 keV region. Palladium targets irradiated with a 10(15) W cm(-2) laser pulse have previously been shown to convert up to similar to 2% of the laser energy into M-L band x-rays with similar pulse duration to that of the incident laser. This x-ray emission is further characterized here, including pulse duration and source size measurements, and a higher conversion efficiency than previously achieved is demonstrated (similar to 4%) using more energetic and longer duration laser pulses (200 ps). The emission near the aluminium K-edge (1.465-1.550 keV) is also reported for similar conditions, along with the successful suppression of such lower band x-rays using a CH coating on the rear side of the target. The possibility of using the source to radiatively heat a thin aluminium foil sample to uniform warm dense matter conditions is discussed.

Increasing the TRL of an L band Retrodirective array for Type Approved SATCOM applications

Retrodirective, self-steering, antennas have the advantage of being able to automatically return a signal back in the direction along from which it originated. The tracking is real time and is carried out in the analogue domain which results in simple circuits which can be accommodated, planar-form, behind the antenna elements. The main objective of this paper is to detail the continuation of the work on L band retrodirective antennas which has the ambition of increasing the TRL such that a minimal viable product can be produced, suitable for type approval as an L band SATCOM user terminal. The focus will be the technical challenges that have arisen as the retrodirective antenna is moved up the TRL chain. Some of these aspects include the ability to track very weak modulated signals (S/N tending to 0dB), TX/RX filter and duplexer specifications, PA and LNA considerations. The resultant retrodirective architecture will be compared against typical specifications of L band satellite ground terminals, showing that the retrodirective antenna offers a simple and effective real time tracking antenna architecture.

Unloading or not unloading? Sheep welfare implication of rest stop at control post after a 29h transport

In Europe, maximum journey time for transported sheep is set at 29. h (EC Regulation 1/2005), after which animals must be unloaded, fed and watered in control posts stopping for 24. h, as all other species, before continuing their journey. The industry considers these resting times too general, not taking into account the peculiar differences between species or age classes. Also, loading and unloading have been reported to be detrimental for the animals. Therefore, the industry pushes to reduce the times at control post and avoid unloading the animals from the truck. Since there is little information concerning the effect of resting in a stationary truck after long journeys, the present study aims to evaluate the effect of an 8. h rest stop on the truck for transported ewes compared to being unloaded for resting in a control post for the same amount of time, considering physiological and behavioural measures. Two groups of ewes were transported for 29. h, after which one was unloaded and housed in a pen (P) at the control post while the other was left inside the truck (T). After 8. h stop, a further 6. h travel was headed to the farm of origin. A third group (C) stayed at the farm as control. During the stop, standing, resting, moving and eating behaviour of all groups was recorded. Blood parameters, salivary and faecal cortisol were assessed at different stages. The behaviour of P animals during the resting period was more similar to C than to T ones, where feeding and lying behaviours were restricted by the limited space allowance on the truck. After returning to the farm of origin, both T and P animals showed different parameters' levels as compared to C. P ewes showed a mean loss weight of 2. kg not recorded in group T and showed higher signs of muscular damage compared to C group. It was concluded that, with so short resting times as 8. h, there is no clear advantages in terms of animal welfare for avoiding the unloading and loading of the animals in the control post after long journeys.

Search filters: mapping the literature using a novel form of content analysis.

Background: Search filters are combinations of words and phrases designed to retrieve an optimal set of records on a particular topic (subject filters) or study design (methodological filters). Information specialists are increasingly turning to reusable filters to focus their searches. However, the extent of the academic literature on search filters is unknown. We provide a broad overview to the academic literature on search filters.
Objectives: To map the academic literature on search filters from 2004 to 2015 using a novel form of content analysis.
Methods: We conducted a comprehensive search for literature between 2004 and 2015 across eight databases using a subjectively derived search strategy. We identified key words from titles, grouped them into categories, and examined their frequency and co-occurrences.
Results: The majority of records were housed in Embase (n = 178) and MEDLINE (n = 154). Over the last decade, both databases appeared to exhibit a bimodal distribution with the number of publications on search filters rising until 2006, before dipping in 2007, and steadily increasing until 2012. Few articles appeared in social science databases over the same time frame (e.g. Social Services Abstracts, n = 3).
Unsurprisingly, the term ‘search’ appeared in most titles, and quite often, was used as a noun adjunct for the word 'filter' and ‘strategy’. Across the papers, the purpose of searches as a means of 'identifying' information and gathering ‘evidence’ from 'databases' emerged quite strongly. Other terms relating to the methodological assessment of search filters, such as precision and validation, also appeared albeit less frequently.
Conclusions: Our findings show surprising commonality across the papers with regard to the literature on search filters. Much of the literature seems to be focused on developing search filters to identify and retrieve information, as opposed to testing or validating such filters. Furthermore, the literature is mostly housed in health-related databases, namely MEDLINE, CINAHL, and Embase, implying that it is medically driven. Relatively few papers focus on the use of search filters in the social sciences.