Low-dose aspirin and survival in men with prostate cancer: a study using the UK Clinical Practice Research Datalink

Purpose: Aspirin use is associated with reduced risk of, and death from, prostate cancer. Our aim was to determine whether low-dose aspirin use after a prostate cancer diagnosis was associated with reduced prostate cancer-specific mortality.

Methods: A cohort of newly diagnosed prostate cancer patients (1998–2006) was identified in the UK Clinical Practice Research Datalink (confirmed by cancer registry linkage). A nested case–control analysis was conducted using conditional logistic regression to compare aspirin usage in cases (prostate cancer deaths) with up to three controls (matched by age and year of diagnosis).

Results: Post-diagnostic low-dose aspirin use was identified in 52 % of 1,184 prostate cancer-specific deaths and 39 % of 3,531 matched controls (unadjusted OR 1.51, 95 % CI 1.19, 1.90; p < 0.001). After adjustment for confounders including treatment and comorbidities, this association was attenuated (adjusted OR 1.02 95 % CI 0.78, 1.34; p = 0.86). Adjustment for estrogen therapy accounted for the majority of this attenuation. There was also no evidence of dose–response association after adjustments. Compared with no use, patients with 1–11 prescriptions and 12 or more prescriptions had adjusted ORs of 1.07 (95 % CI 0.78, 1.47; p = 0.66) and 0.97 (95 % CI 0.69, 1.37; p = 0.88), respectively. There was no evidence of a protective association between low-dose aspirin use in the year prior to diagnosis and prostate cancer-specific mortality (adjusted OR 1.04 95 % CI 0.89, 1.22; p = 0.60).

Conclusion: We found no evidence of an association between low-dose aspirin use before or after diagnosis and risk of prostate cancer-specific mortality, after potential confounders were accounted for, in UK prostate cancer patients.

Experimental and Computational Approach Investigating Burst Fracture Augmentation Using PMMA and Calcium Phosphate Cements

The aim of the study was to use a computational and experimental approach to evaluate, compare and predict the ability of calcium phosphate (CaP) and poly (methyl methacrylate) (PMMA) augmentation cements to restore mechanical stability to traumatically fractured vertebrae, following a vertebroplasty procedure. Traumatic fractures (n = 17) were generated in a series of porcine vertebrae using a drop-weight method. The fractured vertebrae were imaged using μCT and tested under axial compression. Twelve of the fractured vertebrae were randomly selected to undergo a vertebroplasty procedure using either a PMMA (n = 6) or a CaP cement variation (n = 6). The specimens were imaged using μCT and re-tested. Finite element models of the fractured and augmented vertebrae were generated from the μCT data and used to compare the effect of fracture void fill with augmented specimen stiffness. Significant increases (p <0.05) in failure load were found for both of the augmented specimen groups compared to the fractured group. The experimental and computational results indicated that neither the CaP cement nor PMMA cement could completely restore the vertebral mechanical behavior to the intact level. The effectiveness of the procedure appeared to be more influenced by the volume of fracture filled rather than by the mechanical properties of the cement itself.

ND3, ND1 and 39 kDa subunits are more exposed in the de-active form of bovine mitochondrial complex I

An intriguing feature of mitochondrial complex I from several species is the so-called A/D transition, whereby the idle enzyme spontaneously converts from the active (A) form to the de-active (D) form. The A/D transition plays an important role in tissue response to the lack of oxygen and hypoxic deactivation of the enzyme is one of the key regulatory events that occur in mitochondria during ischaemia. We demonstrate for the first time that the A/D conformational change of complex I does not affect the macromolecular organisation of supercomplexes in vitro as revealed by two types of native electrophoresis. Cysteine 39 of the mitochondrially-encoded ND3 subunit is known to become exposed upon de-activation. Here we show that even if complex I is a constituent of the I + III + IV (S) supercomplex, cysteine 39 is accessible for chemical modification in only the D-form. Using lysine-specific fluorescent labelling and a DIGE-like approach we further identified two new subunits involved in structural rearrangements during the A/D transition: ND1 (MT-ND1) and 39 kDa (NDUFA9). These results clearly show that structural rearrangements during de-activation of complex I include several subunits located at the junction between hydrophilic and hydrophobic domains, in the region of the quinone binding site. De-activation of mitochondrial complex I results in concerted structural rearrangement of membrane subunits which leads to the disruption of the sealed quinone chamber required for catalytic turnover.

Local versus nonlocal cloning in a noisy environment

We address the distribution of quantum information among many parties in the presence of noise. In particular, we consider how to optimally send to m receivers the information encoded into an unknown coherent state. On one hand, a local strategy is considered, consisting in a local cloning process followed by direct transmission. On the other hand, a telecloning protocol based on nonlocal quantum correlations is analysed. Both the strategies are optimized to minimize the detrimental effects due to losses and thermal noise during the propagation. The comparison between the local and the nonlocal protocol shows that telecloning is more effective than local cloning for a wide range of noise parameters. Our results indicate that nonlocal strategies can be more robust against noise than local ones, thus being suitable candidates for playing a major role in quantum information networks.

Evaluation of methodologies to determine vegetable oil species present in oil mixtures: Proposition of an approach to meet the EU legislation demands for correct vegetable oils labelling

Refined vegetable oils are widely used in the food industry as ingredients or components in many processed food products in the form of oil blends. To date, the generic term 'vegetable oil' has been used in the labelling of food containing oil blends. With the introduction of new EU Regulation for Food Information (1169/2011) due to take effect in 2014, the oil species used must be clearly identified on the package and there is a need for development of fit for purpose methodology for industry and regulators alike to verify the oil species present in a product. The available methodologies that may be employed to authenticate the botanical origin of a vegetable oil admixture were reviewed and evaluated. The majority of the sources however, described techniques applied to crude vegetable oils such as olive oil due to the lack of refined vegetable oil focused studies. Nevertheless, DNA based typing methods and stable isotopes procedures were found not suitable for this particular purpose due to several issues. Only a small number of specific chromatographic and spectroscopic fingerprinting methods in either targeted or untargeted mode were found to be applicable in potentially providing a solution to this complex authenticity problem. Applied as a single method in isolation, these techniques would be able to give limited information on the oils identity as signals obtained for various oil types may well be overlapping. Therefore, more complex and combined approaches are likely to be needed to identify the oil species present in oil blends employing a stepwise approach in combination with advanced chemometrics. Options to provide such a methodology are outlined in the current study.

Climate change response in Europe: What's the reality? Analysis of adaptation and mitigation plans from 200 urban areas in 11 countries

Urban areas are pivotal to global adaptation and mitigation efforts. But how do cities actually perform in terms of climate change response? This study sheds light on the state of urban climate change adaptation and mitigation planning across Europe. Europe is an excellent test case given its advanced environmental policies and high urbanization. We performed a detailed analysis of 200 large and medium-sized cities across 11 European countries and analysed the cities' climate change adaptation and mitigation plans. We investigate the regional distribution of plans, adaptation and mitigation foci and the extent to which planned greenhouse gas (GHG) reductions contribute to national and international climate objectives. To our knowledge, it is the first study of its kind as it does not rely on self-assessment (questionnaires or social surveys). Our results show that 35 % of European cities studied have no dedicated mitigation plan and 72 % have no adaptation plan. No city has an adaptation plan without a mitigation plan. One quarter of the cities have both an adaptation and a mitigation plan and set quantitative GHG reduction targets, but those vary extensively in scope and ambition. Furthermore, we show that if the planned actions within cities are nationally representative the 11 countries investigated would achieve a 37 % reduction in GHG emissions by 2050, translating into a 27 % reduction in GHG emissions for the EU as a whole. However, the actions would often be insufficient to reach national targets and fall short of the 80 % reduction in GHG emissions recommended to avoid global mean temperature rising by 2 °C above pre-industrial levels. © 2013 Springer Science+Business Media Dordrecht.

The Economics of Total War and Reconstruction, 1914-1922

This chapter features a discussion of the economy and mobilization for the First World War. The authors analyse the implications and cost of total war, concluding with an examination of its contradictory legacies. In studying the war’s impact on Germany in particular, the chapter provides an in-depth look at the consequences of war on Europe’s strongest pre-war economy, without the complications of separating out the issues of a developing country, which can mimic those faced in wartime. The economic challenges that warring parties faced during the war included mobilization, warfare, labour shortage, impaired domestic economic activity, restricted international trade, a systematic redistribution of resources towards the war economy, food rationing, the predictable emergence of black markets, and a drop in living standards. The authors also discuss strategies to meet the significant financial demands associated with the war, and its tumultuous economic and political aftermath.

Tunnel spoil classification and applicability of lime addition in weak formations for muck reuse

Tunnel construction planning requires careful consideration of the spoil management part, as this involves environmental, economic and legal requirements. In this paper a methodological approach that considers the interaction between technical and geological factors in determining the features of the resulting muck is proposed. This gives indications about the required treatments as well as laboratory and field characterisation tests to be performed to assess muck recovery alternatives. While this reuse is an opportunity for excavations in good quality homogeneous grounds (e.g. granitic mass), it is critical for complex formation. This approach has been validated, at present, for three different geo-materials resulting from a tunnel excavation carried out with a large diameter Earth Pressure Balance Shield (EPB) through a complex geological succession. Physical parameters and technological features of the three materials have been assessed, according to their valorisation potential, for defining re-utilisation patterns. The methodology proved to be effective and the laboratory tests carried out on the three materials allowed the suitability and treatment effectiveness for each muck recovery strategy to be defined. © 2014 Elsevier Ltd.

Homological Localisation of Model Categories

One of the most useful methods for studying the stable homotopy category is localising at some spectrum E. For an arbitrary stable model category we introduce a candidate for the E–localisation of this model category. We study the properties of this new construction and relate it to some well–known categories.

HPV16 activates the AIM2 inflammasome in keratinocytes

Human papillomaviruses (HPV) are double-stranded DNA viruses, which selectively infect keratinocytes in stratified epithelia. After an initial infection, many patients clear HPV. In some patients, however, HPV persist, and dysfunctional innate immune responses to HPV infection could be involved in the ineffective clearing of these viruses. In this study, the mechanisms of HPV-induced immune responses in keratinocytes were investigated. Binding of viral DNA leads to AIM2 inflammasome activation and IL-1β release, while IFI16 activation results in IFN-β release. Using immunohistochemistry, AIM2 and IFI16-two recently identified sensors for cytosolic DNA-were also detected in HPV positive skin lesions. CISH stainings further confirmed the presence of cytosolic HPV16 DNA in biopsy samples. Moreover, active IL-1β and cleaved caspase-1 were detected in HPV infected skin, suggesting inflammasome activation by viral DNA. In subsequent functional studies, HPV16 DNA triggered IL-1β and IL-18 release via the AIM2 inflammasome in normal human keratinocytes. Although HPV DNA did not induce IFN-β in keratinocytes, IFN-β secretion was observed when AIM2 was blocked. Meanwhile, blocking of IFI16 increased HPV16 DNA-induced IL-1β, but not IL-18, secretion. These findings suggest crosstalk between IFI16 and AIM2 in the immune response to HPV DNA. In sum, novel aspects concerning HPV-induced innate immune responses were identified. Eventually, understanding the mechanisms of HPV-induced inflammasome activation could lead to the development of novel strategies for the prevention and treatment of HPV infections.

Citizenship and (Un)Sustainability: A Green Republican Perspective

This chapter explores some of the connections (causal and other) between the decline in active citizenship, the displacement of citizenship by consumer identities and interests, and the shift to a transactional mode of democratic politics and how and in what ways these are connected with “actually existing unsustainability.” It proposes an account of “green republican citizenship” as an appropriate theory and practice of establishing a link between the practices of democracy and the processes of democratization in the transition from unsustainability. The chapter begins from the (not uncontroversial) position that debt-based consumer capitalism (and especially its more recent neoliberal incarnation) is incompatible with a version of democratic politics and associated norms and practices of green citizenship required for a transition from unsustainable development. It outlines an explicitly “green republican” conception of citizenship as an appropriate way to integrate democratic citizenship and creation of a more sustainable political and socio-ecological order.

Production of porous aluminium and iron sulphated oxyhydroxides using industrial grade coagulants for optimised arsenic removal from groundwater

The optimisation of Fe and Al oxyhydroxide materials produced using industrial grade coagulants is presented in this work. The effects of synthesis pH and post-synthesis washing procedure onto the arsenic adsorption capacity of the materials were investigated. It was shown that the materials produced at higher pH were more efficient in removing As(V), especially after cleaning procedure. The materials produced at lower pH were less efficient in removing As(V) but the higher presence of sulphate groups in the materials produced at lower pH enhanced As(III) adsorption. Most performing materials can remove up to 84.7 mg As(V) g^-1 or 77.9 mg As(III) g^-1.