Alkali activated fuel ash and slag mixes:optimization study from paste to concrete building blocks

Alkali activated binders, based on ash and slag, also known as geopolymers, can play a key role in reducing the carbon footprint of the construction sector by replacing ordinary Portland cement in some concretes. Since 1970s, research effort has been ongoing in many research institutions. In this study, pulverized fuel ash (pfa) from a UK power plant, ground granulated blast furnace slag (ggbs) and combinations of the two have been investigated as geopolymer binders for concrete applications. Activators used were sodium hydroxide and sodium silicate solutions. Mortars with sand/binder ratio of 2.75 with several pfa and ggbs combinations have been mixed and tested. The optimization of alkali dosage (defined as the Na2O/binder mass ratio) and modulus (defined as the Na2O/SiO2 mass ratio) resulted in strengths in excess of 70 MPa for tested mortars. Setting time and workability have been considered for the identification of the best combination of pfa/ggbs and alkali activator dosage for different precast concrete products. Geopolymer concrete building blocks have been replicated in laboratory and a real scale factory trial has been successfully carried out. Ongoing microstructural characterization is aiming to identify reaction products arising from pfa/ggbs combinations.

Geographical variation in inorganic arsenic in paddy field samples and commercial rice from the Iberian Peninsula

This study investigated total arsenic and arsenic speciation in rice using ion chromatography with mass spectrometric detection (IC-ICP-MS), covering the main rice-growing regions of the Iberian Peninsula in Europe. The main arsenic species found were inorganic and dimethylarsinic acid. Samples surveyed were soil, shoots and field-collected rice grain. From this information soil to plant arsenic transfer was investigated plus the distribution of arsenic in rice across the geographical regions of Spain and Portugal. Commercial polished rice was also obtained from each region and tested for arsenic speciation, showing a positive correlation with field-obtained rice grain. Commercial polished rice had the lowest i-As content in Andalucia, Murcia and Valencia while Extremadura had the highest concentrations. About 26% of commercial rice samples exceeded the permissible concentration
for infant food production as governed by the European Commission. Some cadmium data is also presented, available with ICP-MS analyses, and show low concentration in rice samples.