Susceptibility to stress corrosion cracking of NiTi laser weldment in Hanks’ solution

In this study, the susceptibility to stress corrosion cracking (SCC) of laser-welded NiTi wires in Hanks’ solution at 37.5 °C was studied by the slow strain-rate test (SSRT) at open-circuit potential and at different applied anodic potentials. The weldment shows high susceptibility to SCC when the applied potential is near to the pitting potential of the heat-affected zone (HAZ). The pits formed in the HAZ become sites of crack initiation when stress is applied, and cracks propagate in an intergranular mode under the combined effect of corrosion and stress. In contrast, the base-metal is immune to SCC under similar conditions. The increase in susceptibility to SCC in the weldment could be attributed to the poor corrosion resistance in the coarse-grained HAZ.

Effect of post-weld heat-treatment on the oxide film and corrosion behaviour of laser-welded shape memory NiTi wires

Post-weld heat-treatment (PWHT) was applied to NiTi weldments to improve the corrosion behaviour by modifying the microstructure and surface composition. The surface oxide film on the weldments is principally TiO2, together with some Ti, TiO, and Ti2O3. The surface Ti/Ni ratio of the weldments after PWHT is increased. The oxide film formed in Hanks’ solution is thicker on the weldments after PWHT. The pitting resistance of the weldments is increased by PWHT. The galvanic effect in the weldments is very small. The weldment with PWHT at 350 °C shows the best corrosion resistance among other heat-treated weldments in this study.

Adaptive binary mask for privacy region protection

Privacy region protection in video surveillance systems is an active topic at present. In previous research, a binary mask mechanism has been developed to indicate the privacy region; however this incurs a significant bitrate overhead. In this paper, an adaptive binary mask is proposed to represent the privacy region. In a practical privacy region protection application, in which the privacy region typically occupies less than half of the overall frame and is rectangular or approximately rectangular, the proposed adaptive binary mask can effectively reduce the bitrate overhead. The proposed method can also be easily applied to the FMO mechanism of H.264/AVC, providing both error resilience and a lower bitrate overhead.

Trends in skin cancer knowledge, sun protection practices and behaviours in the Northern Ireland population

Background: Sun exposure increases risk of skin cancer, especially melanoma, incidence of which continues to rise. Reported skin cancer knowledge and trends in sun care behaviours are documented in a UK region where there has been 20 years of sun-related health promotion campaigns. Methods: In 2000, 2004 and 2008, a 'care in the sun' module was included in the Northern Ireland (NI) Omnibus survey. Randomly selected subjects were asked to complete a sun-related questionnaire and proportions of respondents analysed by demographic and socio-economic factors, with differences tested using z-tests and the chi-squared test. Results: Around 3623 persons responded. Skin cancer knowledge was high (97). Sun avoidance decreased with time and was lowest among younger age groups and males. Sunscreen use was high (70), unchanged over 8 years, and more likely among younger age groups, females, those in paid employment, and those with tertiary level education. Use of sunscreen with minimum Sun Protection Factor (SPF) 15 (a campaign message) increased from 45 to 70 (P

Lighting Strike Protection Systems

refers to composites that are specifically made/modified to provide more than one functionality. Typically, composites' main functionality is structural

Fluorescence based fibre optic pH sensor for the pH 10–13 range suitable for corrosion monitoring in concrete structures

The design, development and evaluation of an optical fibre pH sensor for monitoring pH in the alkaline region are discussed in detail in this paper. The design of this specific pH sensor is based on the pH induced change in fluorescence intensity of a coumarin imidazole dye which is covalently attached to a polymer network and then fixed to the distal end of an optical fibre. The sensor provides a response over a pH range of 10.0–13.2 with an acceptable response rate of around 50 min, having shown a very good stability over a period of longer than 20 months thus far. The sensor has also demonstrated little cross-sensitivity to ionic strength (IS) and also excellent photostability through a series of laboratory tests. These features make this type of sensor potentially well suited for in situ long term monitoring of pH in concrete structures, to enhance structural monitoring in the civil engineering sector

Assessing parenting capacity in child protection: towards a knowledge-based model

The assessment of parenting capacity continues to engender public concern in cases of suspected harm to children. This paper outlines a model for approaching this task based on the application of three key domains of knowledge in social work relating to facts, theory and practice wisdom. The McMaster Model of Family Assessment is identified out of this process and reworked to give it a sharper focus on parenting roles and responsibilities. Seven formative dimensions of parenting are then elicited and combined with an analytical process of identifying strengths, concerns, prospects for growth and impact on child outcomes. The resulting assessment framework, it is argued, adds rigour to professional judgements about parenting capacity and enhances formulations on risk in child protection.