Dramatic structure in the photodetachment of inner shells of negative ions: Li-

Deep inner-shell photodetachment of negative ions is shown to differ qualitatively and quantitatively from the corresponding process in neutral atoms and positive ions. As an example, calculations of the photodetachment of Li- out of the 1s shell, using an augmented R-matrix methodology, are presented and show numerous structures over a broad energy region including a new phenomenon: Auger decay of a shape resonance. Li- was selected because it is the simplest multishell negative ion and is amenable to experimental scrutiny.

The purification and characterization of phosphonopyruvate hydrolase, a novel carbon-phosphorus bond cleavage enzyme from Variovorax sp. Pal2.

Phosphonopyruvate hydrolase, a novel bacterial carbon-phosphorus bond cleavage enzyme, was purified to homogeneity by a series of chromatographic steps from cell extracts of a newly isolated environmental strain of Variovorax sp. Pal2. The enzyme was inducible in the presence of phosphonoalanine or phosphonopyruvate; unusually, its expression was independent of the phosphate status of the cell. The native enzyme had a molecular mass of 63 kDa with a subunit mass of 31.2 kDa. Activity of purified phosphonopyruvate hydrolase was Co2+-dependent and showed a pH optimum of 6.7–7.0. The enzyme had a Km of 0.53 mM for its sole substrate, phosphonopyruvate, and was inhibited by the analogues phosphonoformic acid, 3-phosphonopropionic acid, and hydroxymethylphosphonic acid. The nucleotide sequence of the phosphonopyruvate hydrolase structural gene indicated that it is a member of the phosphoenolpyruvate phosphomutase/isocitrate lyase superfamily with 41% identity at the amino acid level to the carbon-to-phosphorus bond-forming enzyme phosphoenolpyruvate phosphomutase from Tetrahymena pyriformis. Thus its apparently ancient evolutionary origins differ from those of each of the two carbon-phosphorus hydrolases that have been reported previously; phosphonoacetaldehyde hydrolase is a member of the haloacetate dehalogenase family, whereas phosphonoacetate hydrolase belongs to the alkaline phosphatase superfamily of zinc-dependent hydrolases. Phosphonopyruvate hydrolase is likely to be of considerable significance in global phosphorus cycling, because phosphonopyruvate is known to be a key intermediate in the formation of all naturally occurring compounds that contain the carbon-phosphorus bond.

A comparison of the strengths of gastropod shells with forces generated by potential crab predators

Carcinus manenas, Liocarcinus puber and Cancer pagurs are thought to be three likely crab predators of the gastropod Calliostoma Zizyphinum. In order to compare the strenghts of predators and their prey, the whole shell and aperture lip strengh of white and pink Calliostoma morphotypes and the maximum forces exerted by the chelipeds of three crab species were measured. Although white shells were thicker than pink shells, Calliostoma colour morphotyes did not differ significantly in either the force required to break the shell lip or the whole shell. Both Liocarcinus puber and Carcinus maenas have dimorphic chelipeds and their “crusher” chelipeds deliver almost double the forces generated by the‘cutter’chelipeds. In constrast, Cancer pagurus has monomorphic chelipeds both delivering similar forces. When compared with Calliostoma shell strenght, the forces generated by the‘crusher’chelipeds of most L. puber tested were, in general, sufficient to break the shell lip of Calliostoma shells, whereas forces generated by the‘cutter’chelipeds of only the larger individuals were sufficient to break the shell lip. In C. manenas, forces generated by both the‘cutter’and‘crusher’chelipeds often exceeded the minimum recorded force required to break the shell lip and the‘crusher’cheliped reached the minimum force required to break whole Calliostoma shells. Both chelipeds of all C. pagurus tested generated forces in excess of the minimum required to break the shell lip, and the proportion of individuals capable of generating the minimum force required to break the whole shell increased with the size of the size of the crab. Carcinus maenas and Cancer pagurus were capable of breaking both the shell lips and the whole shells of a wider range of shell sizes than L. puber.

The size and shape of shells used by hermit crabs: A multivariate analysis of Clibanarius erythropus

Shell attributes Such as weight and shape affect the reproduction, growth, predator avoidance and behaviour of several hermit crab species. Although the importance of these attributes has been extensively investigated, it is still difficult to assess the relative role of size and shape. Multivariate techniques allow concise and efficient quantitative analysis of these multidimensional properties, and this paper aims to understand their role in determining patterns of hermit crab shell use. To this end, a multivariate approach based on a combination of size-unconstrained (shape) PCA and RDA ordination was used to model the biometrics of southern Mediterranean Clibanarius erythropus Populations and their shells. Patterns of shell utilization and morphological gradients demonstrate that size is more important than shape, probably due to the limited availability of empty shells in the environment. The shape (e.g. the degree of shell elongation) and weight of inhabited shells vary considerably in both female and male crabs. However, these variations are clearly accounted for by crab biometrics in males only. Oil the basis of statistical evidence and findings from past studies. it is hypothesized that larger males of adequate size and strength have access to the larger, heavier and relatively more available shells of the globose Osilinus turbinatus, which cannot be used by average-sized males or by females investing energy in egg production. This greater availability allows larger males to select more Suitable Shapes. (C) 2009 Elsevier Masson SAS. All rights reserved.

Applications of statistical models in proportioning medium strength self-compacting concrete

Self-compacting concrete (SCC) is generally designed with a relatively higher content of finer, which includes cement, and dosage of superplasticizer than the conventional concrete. The design of the current SCC leads to high compressive strength, which is already used in special applications, where the high cost of materials can be tolerated. Using SCC, which eliminates the need for vibration, leads to increased speed of casting and thus reduces labour requirement, energy consumption, construction time, and cost of equipment. In order to obtain and gain maximum benefit from SCC it has to be used for wider applications. The cost of materials will be decreased by reducing the cement content and using a minimum amount of admixtures. This paper reviews statistical models obtained from a factorial design which was carried out to determine the influence of four key parameters on filling ability, passing ability, segregation and compressive strength. These parameters are important for the successful development of medium strength self-compacting concrete (MS-SCC). The parameters considered in the study were the contents of cement and pulverised fuel ash (PFA), water-to-powder ratio (W/P), and dosage of superplasticizer (SP). The responses of the derived statistical models are slump flow, fluidity loss, rheological parameters, Orimet time, V-funnel time, L-box, JRing combined to Orimet, JRing combined to cone, fresh segregation, and compressive strength at 7, 28 and 90 days. The models are valid for mixes made with 0.38 to 0.72 W/P ratio, 60 to 216 kg/m3 of cement content, 183 to 317 kg/m3 of PFA and 0 to 1% of SP, by mass of powder. The utility of such models to optimize concrete mixes to achieve good balance between filling ability, passing ability, segregation, compressive strength, and cost is discussed. Examples highlighting the usefulness of the models are presented using isoresponse surfaces to demonstrate single and coupled effects of mix parameters on slump flow, loss of fluidity, flow resistance, segregation, JRing combined to Orimet, and compressive strength at 7 and 28 days. Cost analysis is carried out to show trade-offs between cost of materials and specified consistency levels and compressive strength at 7 and 28 days that can be used to identify economic mixes. The paper establishes the usefulness of the mathematical models as a tool to facilitate the test protocol required to optimise medium strength SCC.

Factorial Design of Cement Slurries Containing Limestone Powder for Self-Consolidating Slurry-Infiltrated Fiber Concrete

Slurries with high penetrability for production of Self-consolidating Slurry Infiltrated Fiber Concrete (SIFCON) were investigated in this study. Factorial experimental design was adopted in this investigation to assess the combined effects of five independent variables on mini-slump test, plate cohesion meter, induced bleeding test, J-fiber penetration test and compressive strength at 7 and 28 days. The independent variables investigated were the proportions of limestone powder (LSP) and sand, the dosages of superplasticiser (SP) and viscosity agent (VA), and water-to-binder ratio (w/b). A two-level fractional factorial statistical method was used to model the influence of key parameters on properties affecting the behaviour of fresh cement slurry and compressive strength. The models are valid for mixes with 10 to 50% LSP as replacement of cement, 0.02 to 0.06% VA by mass of cement, 0.6 to 1.2% SP and 50 to 150% sand (% mass of binder) and 0.42 to 0.48 w/b. The influences of LSP, SP, VA, sand and W/B were characterised and analysed using polynomial regression which identifies the primary factors and their interactions on the measured properties. Mathematical polynomials were developed for mini-slump, plate cohesion meter, J-fiber penetration test, induced bleeding and compressive strength as functions of LSP, SP, VA, sand and w/b. The estimated results of mini-slump, induced bleeding test and compressive strength from the derived models are compared with results obtained from previously proposed models that were developed for cement paste. The proposed response models of the self-consolidating SIFCON offer useful information regarding the mix optimization to secure a highly penetration of slurry with low compressive strength

Influence of mix proprtions on rheolgy of cement grouts containing limestone powder

In this paper the parameters of cement grout affecting rheological behaviour and compressive strength are investigated. Factorial experimental design was adopted in this investigation to assess the combined effects of the following factors on fluidity, rheological properties, induced bleeding and compressive strength: water/binder ratio (W/B), dosage of superplasticiser (SP), dosage of viscosity agent (VA), and proportion of limestone powder as replacement of cement (LSP). Mini-slump test, Marsh cone, Lombardi plate cohesion meter, induced bleeding test, coaxial rotating cylinder viscometer were used to evaluate the rheology of the cement grout and the compressive strengths at 7 and 28 days were measured. A two-level fractional factorial statistical model was used to model the influence of key parameters on properties affecting the fluidity, the rheology and compressive strength. The models are valid for mixes with 0.35-0.42 W/B, 0.3-1.2% SP, 0.02-0.7% VA (percentage of binder) and 12-45% LSP as replacement of cement. The influences of W/B, SP, VA and LSP were characterised and analysed using polynomial regression which can identify the primary factors and their interactions on the measured properties. Mathematical polynomials were developed for mini-slump, plate cohesion meter, inducing bleeding, yield value, plastic viscosity and compressive strength as function of W/B, SP, VA and proportion of LSP. The statistical approach used highlighted the limestone powder effect and the dosage of SP and VA on the various rheological characteristics of cement grout

Density-Enhanced Gas and Dust Shells in a New Chemical Model for IRC+10216

A new chemical model is presented for the carbon-rich circumstellar envelope (CSE) of the asymptotic giant branch star IRC+10216. The model includes shells of matter with densities that are enhanced relative to the surrounding circumstellar medium. The chemical model uses an updated reaction network including reactions from the RATE06 database and a more detailed anion chemistry. In particular, new mechanisms are considered for the formation of CN-, C3N-, and C2H-, and for the reactions of hydrocarbon anions with atomic nitrogen and with the most abundant cations in the CSE. New reactions involving H- are included which result in the production of significant amounts of C2H- and CN- in the inner envelope. The calculated radial molecular abundance profiles for the hydrocarbons C2H, C4H, and C6H and the cyanopolyynes HC3N and HC5N show narrow peaks which are in better agreement with observations than previous models. Thus, the narrow rings observed in molecular microwave emission surrounding IRC+10216 are interpreted as arising in regions of the envelope where the gas and dust densities are greater than the surrounding circumstellar medium. Our models show that CN- and C2H- may be detectable in IRC+10216 despite the very low theorized radiative electron attachment rates of their parent neutral species. We also show that magnesium isocyanide (MgNC) can be formed in the outer envelope through radiative association involving Mg+ and the cyanopolyyne species.

Modelling the performance of self-compacting SIFCON of cement slurries containing limestone powder using genetic programming technique

The paper explores the potential of applicability of Genetic programming approach (GP), adopted in this investigation, to model the combined effects of five independent variables to predict the mini-slump, the plate cohesion meter, the induced bleeding test, the J-fiber penetration value, and the compressive strength at 7 and 28 days of self-compacting slurry infiltrated fiber concrete (SIFCON). The variables investigated were the proportions of limestone powder (LSP) and sand, the dosage rates of superplasticiser (SP) and viscosity modifying agent (VMA), and water-to-binder ratio (W/B). Twenty eight mixtures were made with 10-50% LSP as replacement of cement, 0.02-0.06% VMA by mass of cement, 0.6-1.2% SP and 50-150% sand (% mass of binder) and 0.42-0.48 W/B. The proposed genetic models of the self-compacting SIFCON offer useful modelling approach regarding the mix optimisation in predicting the fluidity, the cohesion, the bleeding, the penetration, and the compressive strength.

Effect of Mix Proportions on Rheological and Hardened Properties of Composite Cement Pastes

There is an increasing need to identify the effect of mix composition on the rheological properties of composite cement pastes using simple tests to determine the fluidity, the cohesion and other mechanical properties of grouting applications such as compressive strength. This paper reviews statistical models developed using a fractional factorial design which was carried out to model the influence of key parameters on properties affecting the performance of composite cement paste. Such responses of fluidity included mini-slump, flow time using Marsh cone and cohesion measured by Lombardi plate meter and unit weight, and compressive strength at 3 d, 7 d and 28 d. The models are valid for mixes with 0.35 to 0.42 water-to-binder ratio (W/B), 10% to 40% of pulverised fuel ash (PFA) as replacement of cement by mass, 0.02 to 0.06% of viscosity enhancer admixture (VEA), by mass of binder, and 0.3 to 1.2% of superplasticizer (SP), by mass of binder. The derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of composite cement paste are presented. Such parameters can be useful to reduce the test protocol needed for proportioning of composite cement paste. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods which are highlighted. The multi parametric optimization is used in order to establish isoresponses for a desirability function of cement composite paste. Results indicate that the replacement of cement by PFA is compromising the early compressive strength and up 26%, the desirability function decreased.

Factorial Design of Modelling Mix Proportion Parameters of Underwater Composite Cement Grouts

There is an increasing need to identify the rheological properties of cement grout using a simple test to determine the fluidity, and other properties of underwater applications such as washout resistance and compressive strength. This paper reviews statistical models developed using a factorial design that was carried out to model the influence of key parameters on properties affecting the performance of underwater cement grout. Such responses of fluidity included minislump and flow time measured by Marsh cone, washout resistance, unit weight, and compressive strength. The models are valid for mixes with 0.35–0.55 water-to-binder ratio (W/B), 0.053–0.141% of antiwashout admixture (AWA), by mass of water, and 0.4–1.8% (dry extract) of superplasticizer (SP), by mass of binder. Two types of underwater grout were tested: the first one made with cement and the second one made with 20% of pulverised fuel ash (PFA) replacement, by mass of binder. Also presented are the derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of underwater cement grout. Such parameters can be useful to reduce the test protocol needed for proportioning of underwater cement grout. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods that are highlighted.

Scarred limpets at hydrothermal vents: evidence of predation by deep-sea whelks

The chaotic physical and chemical environment at deep-sea hydrothermal vents has been associated with an ecosystem with few predators, arguably allowing the habitat to provide refuge for vulnerable species. The dominance of endemic limpets with thin, open-coiled shells at north Pacific vents may support this view. To test their vulnerability to predation, the incidence of healed repair scars, which are argued to reflect non-lethal encounters with predators, were examined on the shells of over 5,800 vent limpets of Lepetodrilus fucensis McLean (1988) that were collected from 13 to 18 August 1996. Three vent fields on the Juan de Fuca Ridge at ca. 2,200 m depth were sampled, two within 70 m of 47 degrees 56.87'N 129 degrees 05.91'W, and one at 47 degrees 57.85'N 129 degrees 05.15'W with the conspicuous potential limpet predators, the zoarcid fish Pachycara gymninium Anderson and Peden (1988), the galatheid crab Munidopsis alvisca Williams (1988), and the buccinid snail Buccinum thermophilum Harasewych and Kantor (2002). Limpets from the predator-rich vent were most often scarred, a significant difference created by the high incidence of scars on small (

IMMUNOCYTOCHEMICAL AND RADIOIMMUNOMETRICAL DEMONSTRATION OF SEROTONIN-IMMUNOREACTIVITIES AND NEUROPEPTIDE-IMMUNOREACTIVITIES IN THE ADULT-RAT TAPEWORM, HYMENOLEPIS-DIMINUTA (CESTODA, CYCLOPHYLLIDEA)

Standard indirect immunocytochemical techniques have been interfaced with confocal scanning laser microscopy (for whole-mount preparations) and epifluorescence microscopy (for cryosections) to investigate the occurrence and distribution of serotoninergic and peptidergic nerve elements in adult H. diminuta. Serotonin (5-HT)-immunoreactivity (IR) was widespread throughout the worm, occurring in the paired cerebral ganglia, transverse commissure, the 10 longitudinal nerve cords and in a plethora of small nerve fibres of the peripheral nervous system. An abundance of serotoninergic nerve cell bodies was found in association with the lateral nerve cords. The genital atrium and accessory reproductive ducts were richly innervated with serotoninergic nerve fibres. Thirty-five antisera to 20 vertebrate regulatory peptides and 1 invertebrate peptide (FMRFamide) were used to screen the worm for neuropeptide IR. Immunostaining was obtained with antisera raised to pancreatic polypeptide (PP), peptide YY (PYY), neuropeptide Y (NPY), substance P (SP), peptide histidine isoleucine (PHI), xenopsin (XP) and FMRFamide. The most extensive pattern of IR occurred with antisera to PP and PYY, IR being evident in the cerebral ganglia, transverse commissure, longitudinal nerve cords and in small nerve fibres that ramified throughout the parenchyma. A series of bipolar nerve cell bodies between the median nerve cords displayed PP/PYY-IR. The distribution of FMRFamide-IR was reminiscent of the PP/PYY pattern but was less extensive. Comparison of the serotoninergic and peptidergic nervous systems has revealed general similarities and some distinct differences, especially with regard to the distribution of immunoreactive nerve cell bodies. Quantitative data are presented on the levels of PP-, SP-, PHI-, and gastrin-releasing peptide (GRP)-immunoreactivities demonstrable in acid-alcohol extracts of whole worms. The highest level of peptide IR determined was recorded for PP.

AN IMMUNOCYTOCHEMICAL STUDY OF PUTATIVE NEUROTRANSMITTERS IN THE METACERCARIAE OF 2 STRIGEOID TREMATODES FROM RAINBOW-TROUT (ONCORHYNCHUS-MYKISS)

Whole mounts of the metacercariae of Diplostomum sp. and Cotylurus erraticus from rainbow trout have been treated cytochemically for the demonstration of cholinergic, serotoninergic (5-hydroxytryptamine) and peptidergic elements in the nervous system. Antisera directed against four vertebrate (pancreatic polypeptide, peptide YY, substance P and peptide histidine isoleucine) and two invertebrate peptides (neuropeptide F and FMRFamide) were used in an indirect immunofluorescence procedure in conjunction with confocal scanning laser microscopy (CSLM). Of the seven antisera tested, all except peptide histidine isoleucine showed significant immunoreactivity. Cholinergic and serotoninergic staining was found primarily in the central nervous system (CNS) and in cell bodies associated with the ventral and dorsal nerve cords in both trematodes. Peptidergic immunoreactivity was localised in the CNS and PNS of both genera, revealing an extensive innervation within the holdfast organ and in and around the oral and ventral suckers.