Effects of sintering temperature on morphology and mechanical characteristics of 3D printed porous titanium used as dental implant

Porous titanium samples were manufactured using the 3D printing and sintering method in order to determine the effects of final sintering temperature on morphology and mechanical properties. Cylindrical samples were printed and split into groups according to a final sintering temperature (FST). Irregular geometry samples were also printed and split into groups according to their FST. The cylindrical samples were used to determine part shrinkage, in compressive tests to provide stress-strain data, in microCT scans to provide internal morphology data and for optical microscopy to determine surface morphology. All of the samples were used in microhardness testing to establish the hardness. Below 1100 C FST, shrinkage was in the region of 20% but increased to approximately 30% by a FST of 1300 C. Porosity varied from a maximum of approximately 65% at the surface to the region of 30% internally. Between 97 and 99% of the internal porosity is interconnected. Average pore size varied between 24 µm at the surface and 19 µm internally. Sample hardness increased to in excess of 300 HV0.05 with increasing FST while samples with an FST of below 1250 C produced an elastic-brittle stress/strain curve and samples above this displayed elastic-plastic behaviour. Yield strength increased significantly through the range of sintering temperatures while the Young's modulus remained fairly consistent. © 2013 Elsevier B.V.

Tooth replacement for partially dentate elders: a willingness-to-pay analysis

Objectives: The primary aim of this study was to investigate partially dentate elders' willingness-to-pay (WTP) for two different tooth replacement strategies: Removable Partial Dentures (RPDs) and, functionally orientated treatment according to the principles of the Shortened Dental Arch (SDA). The secondary aim was to measure the same patient groups' WTP for dental implant treatment.Methods: 55 patients who had completed a previous RCT comparing two tooth replacement strategies (RPDs (n=27) and SDA (n=28)) were recruited (Trial Registration no. ISRCTN26302774). Patients were asked to indicate their WTP for treatment to replace missing teeth in a number of hypothetical scenarios using the payment card method of contingency evaluation coupled to different costs. Data were collected on patients' social class, income levels and other social circumstances. A Mann-Whitney U Test was used to compare differences in WTP between the two treatment groups. To investigate predictive factors for WTP, multiple linear regression analyses were conducted.Results: The median age for the patient sample was 72.0 years (IQR: 71-75 years). Patients who had been provided with RPDs indicated that their WTP for this treatment strategy was significantly higher (€550; IQR: 500-650) than those patients who had received SDA treatment (€500; IQR: 450-550) (p=0.003). However patients provided with RPDs indicated that their WTP for SDA treatment (€650; IQR: 600-650) was also significantly higher than those patients who had actually received functionally orientated treatment (€550; IQR: 500-600) (p<0.001). The results indicated that both current income levels and previous treatment allocation were significantly correlated to WTP for both the RPD and the SDA groups. Patients in both treatment groups exhibited little WTP for dental implant treatment with a median value recorded which was half the market value for this treatment (€1000; IQR: 500-1000).Conclusions: Amongst this patient cohort previous treatment experience had a strong influence on WTP as did current income levels. Both treatment groups indicated a very strong WTP for simpler, functionally orientated care using adhesive fixed prostheses (SDA) over conventional RPDs. Clinical significance: Partially dentate older patients expressed a strong preference for functionally orientated tooth replacement as an alternative to conventional RPDs.

Tooth replacement for partially dentate elders: a willingness-to-pay analysis

Objectives: The primary aim of this study was to investigate partially dentate elders’ willingness-to-pay (WTP) for two different tooth replacement strategies: using Removable Partial Dentures (RPDs) and, functionally orientated treatment (SDA). The secondary aim was to measure the same patient group’s WTP for dental implants. Methods: Patients who had completed a previous RCT comparing two tooth replacement strategies (RPDs and SDA) were recruited. 59 patients were asked to indicate their WTP for treatment to replace missing teeth in a number of hypothetical scenarios using the payment card method of contingency evaluation coupled to different costs. Data were collected on patients’ social class, longest held occupation, income levels and social circumstances. Results: The median age for the patient sample was 72.0 years (IQR: 71-75 years). Patients who had previously been provided with RPDs indicated that their WTP for this treatment strategy was significantly higher than those patients who had received SDA treatment (Mann-Whitney U Test: p<0.001). This group were also WTP a higher price for SDA treatment than those patients who had previously been treated according to this modality (Mann-Whitney U Test: p=0.005). The results indicated that patients’ age was not correlated with WTP but both social class and current income levels were significantly correlated (Spearman’s rank correlation: p<0.05). Patients in both treatment groups exhibited llittle WTP for dental implant treatment with a median price recorded which was lower than either RPD or SDA treatment. Conclusions: Amongst this patient cohort previous treatment experience had a strong influence on WTP as did social class and current income levels. The patients’ WTP indicated that they did not value dental implants over simpler forms of tooth replacement such as RPDs or a SDA approach.

Tooth replacement for partially dentate elders: a willingness-to-pay analysis

Objectives: The primary aim of this study was to investigate partially dentate elders’ willingness-to-pay (WTP) for two different tooth replacement strategies: using Removable Partial Dentures (RPDs) and, functionally orientated treatment (SDA). The secondary aim was to measure the same patient group’s WTP for dental implants.Methods: Patients who had completed a previous RCT comparing two tooth replacement strategies (RPDs and SDA) were recruited. 59 patients were asked to indicate their WTP for treatment to replace missing teeth in a number of hypothetical scenarios using the payment card method of contingency evaluation coupled to different costs. Data were collected on patients’ social class, longest held occupation, income levels and social circumstances.Results: The median age for the patient sample was 72.0 years (IQR: 71-75 years). Patients who had previously been provided with RPDs indicated that their WTP for this treatment strategy was significantly higher than those patients who had received SDA treatment (Mann-Whitney U Test: p<0.001). This group were also WTP a higher price for SDA treatment than those patients who had previously been treated according to this modality (Mann-Whitney U Test: p=0.005). The results indicated that patients’ age was not correlated with WTP but both social class and current income levels were significantly correlated (Spearman’s rank correlation: p<0.05).Patients in both treatment groups exhibited llittle WTP for dental implant treatment with a median price recorded which was lower than either RPD or SDA treatment.Conclusions: Amongst this patient cohort previous treatment experience had a strong influence on WTP as did social class and current income levels. The patients’ WTP indicated that they did not value dental implants over simpler forms of tooth replacement such as RPDs or a SDA approach.

Accelerated rehabilitation of an edentulous patient with an implant retained dental prosthesis: a case report

This case report details the successful rehabilitation of an edentulous patient using a complete upper prosthesis and a lower implant retained overdenture. The provision of care was split between a specialist centre and a primary care setting. This approach reduced inconvenience to the patient. Modern surgical and prosthodontic techniques also reduced the total delivery time. After initial consultation a new set of complete dentures was prescribed with changes in design to the originals. The patient was also planned for placement of two mandibular implants to stabilise and retain the mandibular denture. The first line of treatment involved provision of a new set of dentures constructed by the patient's general dental practitioner. Dental implants were then placed in a specialist centre and the patient returned to the dental practice for attachment of the lower denture to the dental implants. The benefits and success of mandibular implant retained dentures are well documented. With delivery of the overdenture, the patient reported increased satisfaction with his prostheses which allowed him to eat a greater range of foods and enabled him to feel confident when speaking and socialising.

The relationship between cement fatigue damage and implant surface finish in proximal femoral prostheses

The majority of cemented femoral hip replacements fail as a consequence of loosening. One design feature that may affect loosening rates is implant surface finish. To determine whether or not surface finish effects fatigue damage accumulation in a bone cement mantle, we developed an experimental model of the implanted proximal femur that allows visualisation of damage growth in the cement layer. Five matt surface and five polished surface stems were tested. Pre-load damage and damage after two million cycles was measured. Levels of pre-load (shrinkage) damage were the same for both matt and polished stems; furthermore damage for matt vs. polished stems was not significantly different after two million cycles. This was due to the large variability in damage accumulation rates. Finite element analysis showed that the stress is higher for the polished (assumed debonded) stem, and therefore we must conclude that either the magnitude of the stress increase is not enough to appreciably increase the damage accumulation rate or, alternatively, the polished stem does not debond immediately from the cement. Significantly (P = 0.05) more damage was initiated in the lateral cement compared to the medial cement for both kinds of surface finish. It was concluded that, despite the higher cement stresses with debonded stems, polished prostheses do not provoke the damage accumulation failure scenario. (C) 2003 IPEM. Published by Elsevier Ltd. All rights reserved.

Prosthodontic care for elderly patients

For older patients, clinicians should consider maintaining teeth and using functionally-orientated treatment strategies as an alternative to removable prostheses. When the remaining dentition has a poor prognosis, key teeth should be preserved as overdenture abutments and a gradual transition to edentulousness planned. Where complete dentures are provided, these can be retained using dental implants to overcome many of the problems associated with conventional replacement dentures.

CLINICAL RELEVANCE: The elderly population of today is better informed and more demanding of oral healthcare providers than previous generations. Clinicians should be aware of all the prosthodontic treatment options available for older patients.

Evaluation of Restorative Dentistry Specialty Registrars’ Clinical Experience of Developmental Disorders: A Survey

Background

Specialty Registrars in Restorative Dentistry (StRs) should be competent in the independent restorative management of patients with developmental disorders including hypodontia and cleft lip/palate upon completion of their specialist training.1 Knowledge and management may be assessed via the Intercollegiate Specialty Fellowship Examination (ISFE) in Restorative Dentistry.2

Objective

The aim of this study was to collate and compare data on the training and experience of StRs in the management of patients with developmental disorders across different training units within the British Isles.

Methods

Questionnaires were distributed to all StRs attending the Annual General Meeting of the Specialty Registrars in Restorative Dentistry Group, Belfast, in October 2015. Participants were asked to rate their confidence and experience of assessing and planning treatment for patients with developmental disorders, construction of appropriate prostheses, and provision of dental implants. Respondents were also asked to record clinical supervision and didactic teaching at their unit, and to rate their confidence of passing a future ISFE station assessing knowledge of developmental disorders.

Results

Responses were obtained from 32 StRs (n=32) training within all five countries of the British Isles. The majority of respondents were based in England (72%) with three in Wales, and two in each of Scotland, Northern Ireland, and the Republic of Ireland. Approximately one third of respondents (34%) were in the final years of training (years 4-6). Almost half of the StRs reported that they were not confident of independently assessing (44%) new patients with a developmental disorder, with larger numbers (72%) indicating a lack of confidence in treatment planning. Six respondents rated their experience of treating obturator patients as ‘poor’ or ‘very poor’. The majority (56%) rated their experience of implant provision in these cases as ‘good’ or ‘excellent’ with three-quarters (75%) rating clinical supervision at their unit as ‘good’ or ‘excellent’. Less than half (41%) rated the didactic teaching at their unit as ‘good’ or ‘excellent’, and only 8 StRs indicated that they were confident of passing an ISFE station focused on developmental disorders.

Conclusion

Experience and training regarding patients with developmental disorders is inconsistent for StRs across the British Isles with a number of trainees reporting a lack of clinical exposure.

Extraction and radioimmunoassay quantitation of neuropeptide Y (NPY) and vasoactive intestinal polypeptide (VIP) from human dental pulp tissue

The measurement of neuropeptides in complex biological tissue samples requires efficient and appropriate extraction methods so that immunoreactivity is retained for subsequent radioimmunoassay detection. Since neuropeptides differ in their molecular mass, charge and hydrophobicity, no single method will suffice for the optimal extraction of various neuropeptides. In this study, dental pulp tissue was obtained from 30 human non-carious teeth. Of the three different neuropeptide extraction methods employed, boiling in acetic acid in the presence of protease inhibitors yielded the highest levels of neuropeptide Y (NPY) and vasoactive intestinal polypeptide (VIP). High pressure liquid chromatography (HPLC) analysis of dental pulp tissue verified the authenticity of the neuropeptides extracted. © 2003 Elsevier Science Ltd. All rights reserved.