No second chance: junior neonatal nurses' experiences of caring for babies at the end-of-life and their families

Death of an infant is acutely stressful for parents and professionals. Little is known about junior nurses' experiences providing end-of-life care in Neonatal units (NNU). This study aimed to better understand junior nurses' experiences providing end-of-life care in NNU. Neonatal nurses (n = 12) with less than 3 years experience participated in a focus group. Nominal Group Technique (NGT) was used to build consensus around the challenges faced, alongside suggested developments in improving future care provision. Primary analysis involved successive rounds of ranking and decision-making whilst secondary analysis involved thematic analysis. All issues, whether environmental, professional or social appeared driven by an awareness on the part of nurses, that there was no ‘second chance’ which created a huge pressure to ‘get if right’ for the infants and families. Regarding future care 2 areas of improvement identified were ‘Education and Training’ and Support. This paper unpacks these findings making recommendations for practice.

No second chance: the experiences of junior neonatal nurses in providing end-of-life care for babies and families in the NNU

Background

An infant’s death is acutely stressful for parents and professionals. Little is known about junior nurses’ experiences providing end-of-life care in Neonatal Units (NNU).

Objectives

To better understand junior nurses’ experiences providing end-of-life care in NNU, the study explored the challenges and opportunities inherent in their practice relating to providing such care to babies and their families.

Methods

Neonatal nurses (n=12) with less than 3 years’ experience who were undergoing a neonatal education programme participated. Two focus groups were convened each with 6 nurses. The Ethics Committee at the relevant University approved the study. Nominal Group Technique (NGT) was used in the focus groups to build consensus around the challenges faced by junior nurses, alongside suggested developments in improving future care provision. Primary analysis involved successive rounds of ranking and decision making whilst secondary analysis involved thematic analysis.

Results

The study identified the pressures these nurses felt in having only one chance to ‘get it right’ for the infants and their families. They perceived the need for further ‘education and training’ highlighting that improved education provision would include both additional courses and internal training sessions. Greater ‘support’ from mentors themselves more experienced in this aspect of care within the NNU was identified as important in addressing issues around confidence building and skill development.

Conclusions

The results highlight junior nurses’ need for specific education and mentorship around end-of-life care for babies. This presentation will outline the implications for practice, education and further research.

Software Products for Modelling and Simulation in Materials Science

Models and software products have been developed for modelling, simulation and prediction of different correlations in materials science, including 1. the correlation between processing parameters and properties in titanium alloys and ?-titanium aluminides; 2. time–temperature–transformation (TTT) diagrams for titanium alloys; 3. corrosion resistance of titanium alloys; 4. surface hardness and microhardness profile of nitrocarburised layers; 5. fatigue stress life (S–N) diagrams for Ti–6Al–4V alloys. The programs are based on trained artificial neural networks. For each particular case appropriate combination of inputs and outputs is chosen. Very good performances of the models are achieved. Graphical user interfaces (GUI) are created for easy use of the models. In addition interactive text versions are developed. The models designed are combined and integrated in software package that is built up on a modular fashion. The software products are available in versions for different platforms including Windows 95/98/2000/NT, UNIX and Apple Macintosh. Description of the software products is given, to demonstrate that they are convenient and powerful tools for practical applications in solving various problems in materials science. Examples for optimisation of the alloy compositions, processing parameters and working conditions are illustrated. An option for use of the software in materials selection procedure is described.

Risk assessment of E-Commerce projects using evidential reasoning

The purpose of this study is to develop a decision making system to evaluate the risks in E-Commerce (EC) projects. Competitive software businesses have the critical task of assessing the risk in the software system development life cycle. This can be conducted on the basis of conventional probabilities, but limited appropriate information is available and so a complete set of probabilities is not available. In such problems, where the analysis is highly subjective and related to vague, incomplete, uncertain or inexact information, the Dempster-Shafer (DS) theory of evidence offers a potential advantage. We use a direct way of reasoning in a single step (i.e., extended DS theory) to develop a decision making system to evaluate the risk in EC projects. This consists of five stages 1) establishing knowledge base and setting rule strengths, 2) collecting evidence and data, 3) determining evidence and rule strength to a mass distribution for each rule; i.e., the first half of a single step reasoning process, 4) combining prior mass and different rules; i.e., the second half of the single step reasoning process, 5) finally, evaluating the belief interval for the best support decision of EC project. We test the system by using potential risk factors associated with EC development and the results indicate that the system is promising way of assisting an EC project manager in identifying potential risk factors and the corresponding project risks.

Sources of Software Requirements Change from the Perspectives of Development and Maintenance

Changes to software requirements occur during initial development and subsequent to delivery, posing a risk to cost and quality while at the same time providing an opportunity to add value. Provision of a generic change source taxonomy will support requirements change risk visibility, and also facilitate richer recording of both pre- and post-delivery change data. In this paper we present a collaborative study to investigate and classify sources of requirements change, drawing comparison between those pertaining to software development and maintenance. We begin by combining evolution, maintenance and software lifecycle research to derive a definition of software maintenance, which provides the foundation for empirical context and comparison. Previously published change ‘causes’ pertaining to development are elicited from the literature, consolidated using expert knowledge and classified using card sorting. A second study incorporating causes of requirements change during software maintenance results in a taxonomy which accounts for the entire evolutionary progress of applications software. We conclude that the distinction between the terms maintenance and development is imprecise, and that changes to requirements in both scenarios arise due to a combination of factors contributing to requirements uncertainty and events that trigger change. The change trigger taxonomy constructs were initially validated using a small set of requirements change data, and deemed sufficient and practical as a means to collect common requirements change statistics across multiple projects.

Regenerative Medicine and New Labour Life Science Policy: Rhetorics of Success, Narratives of Sustainability and Survival

Advances in stem cell science and tissue engineering are being turned into applications and products through a novel medical paradigm known as regenerative medicine. This paper begins by examining the vulnerabilities and risks encountered by the regenerative medicine industry during a pivotal moment in its scientific infancy: the 2000s. Under the auspices of New Labour, British medical scientists and life science innovation firms associated with regenerative medicine, received demonstrative rhetorical pledges of support, aligned with the publication of a number of government initiated reports presaged by Bioscience 2015: Improving National Health, Increasing National Wealth. The Department of Health and the Department of Trade and Industry (and its successors) held industry consultations to determine the best means by which innovative bioscience cultures might be promoted and sustained in Britain. Bioscience 2015 encapsulates the first chapter of this sustainability narrative. By 2009, the tone of this storyline had changed to one of survivability. In the second part of the paper, we explore the ministerial interpretation of the ‘bioscience discussion cycle’ that embodies this narrative of expectation, using a computer-aided content analysis programme. Our analysis notes that the ministerial interpretation of these reports has continued to place key emphasis upon the distinctive and exceptional characteristics of the life science industries, such as their ability to perpetuate innovations in regenerative medicine and the optimism this portends – even though many of the economic expectations associated with this industry have remained unfulfilled.

Connected Life Courses:Influences on and Experiences of 'Midlife' In-Migration to Rural Areas

This paper aims to contribute to the theorisation of midlife migration into rural areas. Although the factors influencing migration are known to be variable at different stages of a person's life, much less well understood is how migration decisions at different stages of the life course are connected and how post-migration experiences may be influenced by an earlier life course stage. We argue that midlife migration decisions are the product of the migrant's lifetime experiences and influences up until that stage in their life alongside their expectations and aspirations for future life course stages. Using a case study of the Glens of Antrim (Northern Ireland), this paper specifically demonstrates the role of childhood memories to explain midlife migration to a rural area. In doing so, it argues that some findings more commonly associated with second-generation transnational migration are also equally relevant to migration within the UK. Roots migration and place attachment alongside the midlife migrant's post-migration sense of belonging and permanency are found to be influenced by the migrant's earlier memories, behaviours, and experiences.

Retrofit versus new-build house using life-cycle assessment

This paper reports the findings of research on the environmental performance of two case-study houses, a retrofit and new build. The retrofit was completed to a Passivhaus standard while the new build was completed to current Irish building regulations. Environmental performance of the retrofit and new build was measured using life-cycle assessments, examining the assembly, operational and end-of-life stage over life spans of 50 and 80 years. Using primary information, life-cycle assessment software and life-cycle assessment databases the environmental impacts of each stage were modelled. The operational stage of both case studies was found to be the source of the most significant environmental damage, followed by the assembly and the end-of-life stage respectively. The relative importance of the assembly and end-of-life stage decreased as the life span increased. It was found that the retrofit house studied outperformed the new build in the assembly and operational stage, whereas the new build performed better in the end-of-life stage; however, this is highly sensitive, depending on the standards to which both are completed. Operational energy savings pre- and post-retrofit were significant, indicating the future potential for adoption of high-quality retrofitting practices.

The genus Pikea (Dumontiaceae, Rhodophyta) in England and the North Pacific: Comparative morphological, life history, and molecular studies

A Pikea species attributed to Pikea californica Harvey has been established in England since at least 1967. Previously, this species was believed to occur only in Japan and Pacific North America. Comparative morphological studies on field-collected material and cultured isolates from England, California, and Japan and analysis of organellar DNA restriction fragment length polymorphisms, detected using labeled organellar DNA as a non-radioactive probe, showed that English Pikea is conspecific with P. californica from California. Both populations consist of dioecious gametophytes with heteromorphic life histories involving crustose tetrasporophytes; 96% of organellar DNA bands were shared between interoceanic samples. A second dioecious species of Pikea, P. pinnata Setchell In Collins, Holden et Setchell, grows sympatrically with P. californica near San Francisco but can be distinguished by softer texture, more regular branching pattern, and elongate cystocarpic axes. Pikea pinnata and P. californica samples shared 49-50% of organellar DNA bands, consistent with their being distinct species. Herbarium specimens of P. robusta Abbott resemble P. pinnata in some morphological features but axes are much wider; P. robusta may represent a further, strictly subtidal species but fertile material is unknown. Pikea thalli from Japan, previously attributed to P. californica and described here as Pikea yoshizakii sp. nov., are monoecious and show a strikingly different type of life history. After fertilization, gonimoblast filaments grow outward through the cortex and form tetrasporangial nemathecia; released tetraspores develop directly into erect thalli. Tetrasporoblastic life histories are characteristic of certain members of the Phyllophoraceae but were previously unknown in the Dumontiaceae. Japanese P. yoshizakii shared 55 and 56% of organellar DNA bands with P. californica and P. pinnata, respectively phylogenetic analysis indicated equally distant relationships to both species. Pikea yoshizakii or a closely similar species with the same life history occurs in southern California and Mexico.