Yielding Behaviour of Electron Beam Lithography and Focused Ion Beam Made Nanocrystalline Micro/Nanopillars

Electron beam lithography (EBL) and focused ion beam (FIB) methods were developed in house to fabricate nanocrystalline nickel micro/nanopillars so to compare the effect of fabrication on plastic yielding. EBL was used to fabricate 3 μm and 5 μm thick poly-methyl methacrylate patterned substrates in which nickel pillars were grown by electroplating with height to diameter aspect ratios from 2:1 to 5:1. FIB milling was used to reduce larger grown pillars to sizes similar to EBL grown pillars. X-ray diffraction, electron back-scatter diffraction, scanning electron microscopy, and FIB imaging were used to characterize the nickel pillars. The measured grain size of the pillars was 91±23 nm, with strong <110> and weaker <111> and <110> crystallographic texture in the growth. Load-controlled compression tests were conducted using a MicroMaterials nano-indenter equipped with a 10 μm flat punch at constant rates from 0.0015 to 0.03 mN/s on EBL grown pillars, and 0.0015 and 0.015 mN/s on FIB-milled pillars. The measured Young’s modulus ranged from 55 to 350 GPa for all pillars, agreeing with values in the literature. EBL grown pillars exhibited stochastic strain-bursts at slow loading rates, attributed to local micro yield events, followed by work hardening. Sharp yield points were also observed and attributed to the gold seed layer de-bonding between the nickel pillar and substrate due to the shear stress associated with end effects that arise from the substrate constraint. The onset of yield ranged from 108 to 1800 MPa, which is greater than bulk nickel, but within values given in the literature. FIB-milled pillars demonstrated stochastic yield behaviour at all loading rates tested, yielding between 320 and 625 MPa. Deformation was apparent at FIB-milled pillar tops, where the smallest cross-sectional area was measured, but still exhibited superior yield strength to bulk nickel. The gallium damage at the outer surface of the pillars likely aids in dislocation nucleation and plasticity, leading to lower yield strengths than for the EBL pillars. Thermal drift, substrate effects, and noise due to vibrations within the indenter system contributed to variance and inconsistency in the data.

Gross and net nitrogen transformation rates and availability in late summer in tall shrub and birch hummock ecosystems of the Canadian low Arctic

Climate change is occurring most rapidly in the Arctic where warming has been twice as fast as the rest of the globe over the last few decades. Arctic soils contain a vast store of carbon and warmer arctic soils may mediate current atmospheric CO2 concentrations and global warming trends. Warmer soils could increase nutrient availability to plants, leading to increased primary production and sequestration of CO2. Presumably because of these effects of warming on shrub ecosystems, shrubs have been expanding across the arctic over the last 50 years, Arctic shrub expansion may track or cause changes in nutrient cycling and availability that favour growth of larger, denser shrubs. This study aimed at measuring gross and net nitrogen cycling rates, major soil nitrogen and carbon pool sizes, and elucidating controls on nutrient cycling and availability between a mesic birch (Betula nana) hummock tundra ecosystem and an ecosystem of dense, tall, birch (B. nana) shrubs. Nitrogen cycling and availability was enhanced at the tall shrub ecosystem compared to the birch hummock ecosystem. Net nitrogen immobilization by microbes was approximately threefold greater at the tall shrub ecosystem. This was in part because of larger microbial biomass nitrogen and carbon (interpreted as a larger microbial community) at the tall shrub ecosystem. Nitrogen inputs via litter were significantly larger at the tall shrub ecosystem and were hypothesized to be the major contributor to the higher dissolved organic and inorganic nitrogen pools in the soil at the tall shrub ecosystem. The results from this study suggest a positive feedback mechanism between litter nitrogen inputs and the enhancement of nitrogen cycling and availability as a driver of shrub expansion across the Arctic.