Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

BARRIERS AND SOLUTIONS TO OPEN SOURCE APPROPRIATE TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT: INNOVATION THROUGH COLLABORATION

It has been proposed that the field of appropriate technology (AT) - small-scale, energy efficient and low-cost solutions, can be of tremendous assistance in many of the sustainable development challenges, such as food and water security, health, shelter, education and work opportunities. Unfortunately, there has not yet been a significant uptake of AT by organizations, researchers, policy makers or the mainstream public working in the many areas of the development sector. Some of the biggest barriers to higher AT engagement include: 1) AT perceived as inferior or ‘poor persons technology’, 2) questions of technological robustness, design, fit and transferability, 3) funding, 4) institutional support, as well as 5) general barriers associated with tackling rural poverty. With the rise of information and communication technologies (ICTs) for online networking and knowledge sharing, the possibilities to tap into the collaborative open-access and open-source AT are growing, and so is the prospect for collective poverty reducing strategies, enhancement of entrepreneurship, communications, education and a diffusion of life-changing technologies. In short, the same collaborative philosophy employed in the success of open source software can be applied to hardware design of technologies to improve sustainable development efforts worldwide. To analyze current barriers to open source appropriate technology (OSAT) and explore opportunities to overcome such obstacles, a series of interviews with researchers and organizations working in the field of AT were conducted. The results of the interviews confirmed the majority of literature identified barriers, but also revealed that the most pressing problem for organizations and researchers currently working in the field of AT is the need for much better communication and collaboration to share the knowledge and resources and work in partnership. In addition, interviews showcased general receptiveness to the principles of collaborative innovation and open source on the ground level. A much greater focus on networking, collaboration, demand-led innovation, community participation, and the inclusion of educational institutions through student involvement can be of significant help to build the necessary knowledge base, networks and the critical mass exposure for the growth of appropriate technology.

Role of Stromal Cell-Derived Factor-1 in Neoangiogenesis in Endometriosis Lesions

Endometriosis affects 5-10% of women and is characterized by the growth of endometrial tissue outside of the uterus. Treatment for endometriosis primarily focuses on symptom relief, is short term with severe side effects and often leads to recurrence of the condition. Establishing new blood supply is a fundamental requirement for endometriosis lesions growth. This has led to the idea that antiangiogenic therapy may be a successful approach for inhibiting endometriosis. Recent evidence indicates that endothelial progenitor cells (EPCs) contribute to neoangiogenesis of endometriotic lesions. These EPCs are recruited to the lesion site by stromal cell-derived factor-1 (SDF-1). We hypothesize that SDF-1 is central to the neoangiogenesis and survival of endometriotic lesions and that administration of SDF-1 blocking antibody will inhibit lesion growth by inhibiting angiogenesis in a murine model of endometriosis. Immunohistochemistry for SDF-1 and CD34 was performed on human endometriosis and normal endometrial samples. Quantification of SDF-1 and EPCs was performed in the blood of endometriosis patients and controls using ELISA and flow cytometry, respectively. A new mouse model of endometriosis was developed using BALB/c-Rag2-/-/IL2rg-/- mice to investigate role of SDF-1 in neoangiogenesis. Either SDF-1 blocking antibody or an isotype control was administered on a weekly basis for four weeks. Weekly samples of peripheral blood from mice were analyzed for SDF-1, other cytokines of interest and EPCs. Mice were euthanized at seven weeks to observe lesion growth and blood vessel development. Our results indicate overabundance of SDF-1 and CD34+ progenitor cells in human endometriotic lesions compared to eutopic endometrium. In the mouse model, SDF-1 and circulating EPC levels decreased from pre-treatment levels after one week, and remained constant over the course of the treatment in both SDF-1 blocking antibody and isotype control groups. In the SDF-1 blocking group, reduced vascularity of lesions, identified by immunofluorescence staining for CD31, was revealed compared to isotype controls. These findings suggest that SDF-1 may be responsible for CD34+ progenitor cell recruitment to the neoangiogenic sites in endometriosis. Blocking of SDF-1 reduces neovascularization of human endometriotic lesions in a mouse model. Further studies on blocking SDF-1 in combination with other antiangiogenic agents are needed.

Self-Management of Chronic Pain: Interventions, Strategies, Barriers, and Facilitators

Background & Purpose: Chronic pain is a prevalent chronic condition for which the best management options rarely provide complete relief. Individuals with chronic pain with neuropathic characteristics (NC) report more severe pain and experience less relief from interventions. Little is known about current self-management practices. The purpose of this dissertation was to inform self-management of chronic pain with and without NC at the individual, health system, and policy levels using the Innovative Care for Chronic Conditions Framework. Methods: The study included a systematic search and review and cross-sectional survey. The review evaluated the evidence for chronic pain self-management interventions and explored the role of health care providers in supporting self-management. The survey was mailed to 8,000 randomly selected Canadians in November 2011, and non-respondents were followed-up in May 2012. Screening questions were included for both chronic pain and NC. The questionnaire captured pain descriptions, self-management strategies, and self-management barriers, and facilitators. Results: Findings of the review suggested that self-management interventions are effective in improving pain and health outcomes. Health care professionals provided self-management advice and referred individuals to self-management interventions. The questionnaire was completed by 1,520 Canadians. Those with chronic pain (n=710) identified primary care physicians as the most helpful pain management professional. Overall, use of non-pharmaceutical medical self-management strategies was low. While use positive emotional self-management strategies was high, individuals with NC were more likely to use negative emotional self-management strategies compared to those without NC. Multiple self-management barriers and facilitators were identified, however those with NC were more likely than those without NC to experience low self-efficacy, depression and severe pain which may impair the ability to self-management. Conclusions: Health care professionals have the opportunity to improve chronic pain outcomes by providing self-management advice, referring to self-management interventions, and addressing self-management barriers and facilitators. Individuals with NC may require additional health services to address their greater self-management challenges, and further research is needed to identify non-pharmaceutical interventions effective in relieving chronic pain with NC. Public policy is needed to facilitate health systems in providing long-term self-management support for individuals with chronic pain.