Design and Implementation of Tools for STM Studies in UHV and at the Solid-Liquid Interface

This thesis presents details of the design and development of novel tools and instruments for scanning tunneling microscopy (STM), and may be considered as a repository for several years' worth of development work. The author presents design goals and implementations for two microscopes. First, a novel Pan-type STM was built that could be operated in an ambient environment as a liquid-phase STM. Unique features of this microscope include a unibody frame, for increased microscope rigidity, a novel slider component with large Z-range, a unique wiring scheme and damping mechanism, and a removable liquid cell. The microscope exhibits a high level of mechanical isolation at the tunnel junction, and operates excellently as an ambient tool. Experiments in liquid are on-going. Simultaneously, the author worked on designs for a novel low temperature, ultra-high vacuum (LT-UHV) instrument, and these are presented as well. A novel stick-slip vertical coarse approach motor was designed and built. To gauge the performance of the motor, an in situ motion sensing apparatus was implemented, which could measure the step size of the motor to high precision. A new driving circuit for stick-slip inertial motors is also presented, that o ffers improved performance over our previous driving circuit, at a fraction of the cost. The circuit was shown to increase step size performance by 25%. Finally, a horizontal sample stage was implemented in this microscope. The build of this UHV instrument is currently being fi nalized. In conjunction with the above design projects, the author was involved in a collaborative project characterizing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on Au(111) films. STM was used to characterize Au substrate quality, for both commercial substrates and those manufactured via a unique atomic layer deposition (ALD) process by collaborators. Ambient and UHV STM was then also used to characterize the NHC/Au(111) films themselves, and several key properties of these films are discussed. During this study, the author discovered an unexpected surface contaminant, and details of this are also presented. Finally, two models are presented for the nature of the NHC-Au(111) surface interaction based on the observed film properties, and some preliminary theoretical work by collaborators is presented.

An Examination of Current Approaches to Integrative Indigenous and Western Knowledge System Implementation in Water Research and Management: A Case Study Encompassing the Colonized Geographies of Canada, Australia, New Zealand, and the United States

The commodification of natural resources and the pursuit of continuous growth has resulted in environmental degradation, depletion, and disparity in access to these life-sustaining resources, including water. Utility-based objectification and exploitation of water in some societies has brought us to the brink of crisis through an apathetic disregard for present and future generations. The ongoing depletion and degradation of the world’s water sources, coupled with a reliance on Western knowledge and the continued omission of Indigenous knowledge to manage our relationship with water has unduly burdened many, but particularly so for Indigenous communities. The goal of my thesis research is to call attention to and advance the value and validity of using both Indigenous and Western knowledge systems (also known as Two-Eyed Seeing) in water research and management to better care for water. To achieve this goal, I used a combined systematic and realist review method to identify and synthesize the peer-reviewed, integrative water literature, followed by semi-structured interviews with first authors of the exemplars from the included literature to identify the challenges and insights that researchers have experienced in conducting integrative water research. Findings suggest that these authors recognize that many previous attempts to integrate Indigenous knowledges have been tokenistic rather than meaningful, and that new methods for knowledge implementation are needed. Community-based participatory research methods, and the associated tenets of balancing power, fostering trust, and community ownership over the research process, emerged as a pathway towards the meaningful implementation of Indigenous and Western knowledge systems. Data also indicate that engagement and collaborative governance structures developed from a position of mutual respect are integral to the realization of a given project. The recommendations generated from these findings offer support for future Indigenous-led research and partnerships through the identification and examination of approaches that facilitate the meaningful implementation of Indigenous and Western knowledge systems in water research and management. Asking Western science questions and seeking Indigenous science solutions does not appear to be working; instead, the co-design of research projects and asking questions directed at the problem rather than the solution better lends itself to the strengths of Indigenous science.

Implementing the Physical Literacy Component of the 2015 Ontario Health and Physical Education Curriculum: Is the Stage Set?

Introduction: Current physical activity levels among children and youth are alarmingly low; a mere 7% of children and youth are meeting the Canadian Physical Activity Guidelines (Colley et al., 2011), which means that the vast majority of this population is at risk of developing major health problems in adulthood (Janssen & Leblanc, 2010). These high inactivity rates may be related to suboptimal experiences in sport and physical activity stemming from a lack of competence and confidence (Lubans, Morgan, Cliff, Barnett, & Okely, 2010). Developing a foundation of physical literacy can encourage and maintain lifelong physical activity, yet this does not always occur naturally as a part of human growth (Hardman, 2011). An ideal setting to foster the growth and development of physical literacy is physical education class. Physical education class can offer all children and youth an equal opportunity to learn and practice the skills needed to be active for life (Hardman, 2011). Elementary school teachers are responsible for delivering the physical education curriculum, and it is important to understand their will and capacity as the implementing agents of physical literacy development curriculum (McLaughlin, 1987). Purpose: The purpose of this study was to explore the physical literacy component of the 2015 Ontario Health and Physical Education curriculum policy through the eyes of key informants, and to explore the resources available for the implementation of this new policy. Methods: Qualitative interviews were conducted with seven key informants of the curriculum policy development, including two teachers. In tandem with the interviews, a resource inventory and curriculum review were conducted to assess the content and availability of physical literacy resources. All data were analyzed through the lens of Hogwood and Gunn’s (1984) 10 preconditions for policy implementation. Results: Participants discussed how implementation is affected by: accountability, external capacity, internal capacity, awareness and understanding of physical literacy, implementation expertise, and policy climate. Discussion: Participants voiced similar opinions on most issues, and the overall lack of attention given to physical education programs in schools will continue to be a major dilemma when trying to combat such high physical inactivity levels.

Evaluation of semi-passive treatment technologies for septic lagoon capacity expansion

In Canada, increases in rural development has led to a growing need to effectively manage the resulting municipal and city sewage without the addition of significant cost- and energy- expending infrastructure. Storring Septic Service Limited is a family-owned, licensed wastewater treatment facility located in eastern Ontario. It makes use of a passive waste stabilization pond system to treat and dispose of waste and wastewater in an environmentally responsible manner. Storring Septic, like many other similar small-scale wastewater treatment facilities across Canada, has the potential to act as a sustainable eco-engineered facility that municipalities and service providers could utilize to manage and dispose of their wastewater. However, it is of concern that the substantial inclusion of third party material could be detrimental to the stability and robustness of the pond system. In order to augment the capacity of the current facility, and ensure it remains a self-sustaining system with the capacity to safely accept septage from other sewage haulers, it was hypothesized that pond effluent treatment could be further enhanced through the incorporation of one of three different technology solutions, which would allow the reduction of wastewater quality parameters below existing regulatory effluent discharge limits put in place by Ontario’s Ministry of the Environment and Climate Change (MOECC). Two of these solutions make use of biofilm technologies in order to enhance the removal of wastewater parameters of interest, and the third utilizes the natural water filtration capabilities of zebra mussels. Pilot-scale testing investigated the effects of each of these technologies on treatment performance under both cold and warm weather operation. This research aimed to understand the important mechanisms behind biological filtration methods in order to choose and optimize the best treatment strategy for full-scale testing and implementation. In doing so, a recommendation matrix was elaborated provided with the potential to be used as a universal operational strategy for wastewater treatment facilities located in environments of similar climate and ecology.

UPTAKE OF THE PERIODIC HEALTH EXAM AMONG ADULTS WITH INTELLECTUAL AND DEVELOPMENTAL DISABILITIES FROM 2003 TO 2015

Background: Over the past decade, annual heath exams have been de-emphasized for the general population but emphasized for adults with intellectual and developmental disabilities (IDD). The purpose of this project was to determine if there has been an increase in the uptake of the health exam among adults with IDD in Ontario, to what extent, and the effect on the quality of preventive care provided. Methods: Using administrative health data, the proportion of adults (18-64 years old) with IDD who received a health exam (long appointment, general assessment, and “true” health exam), a high value on the primary care quality composite score (PCQS), and a health exam or high PCQS each year was compared to the proportion in a propensity score matched sample of the general population. Negative binomial and segmented negative binomial regression controlling for age and sex were used to determine the relative risk of having a health exam/high PCQS/health exam or PCQS over time. Results: Pre joinpoint, the long appointment and general assessment health exam definitions saw a decrease and the “true” health exam saw an increase in the likelihood of adults having a health exam. Post joinpoint, all health exam definitions saw a decrease in the likelihood of adults having a health exam. Pre joinpoint, all PCQS measures (high PCQS, long appointment or high PCQS, “true” health exam or high PCQS) saw an increase in the likelihood for adults to achieve a high PCQS or high PCQS/have a health exam. Post joinpoint, all PCQS measures saw a decrease in the likelihood for adults to achieve a high PCQS or high PCQS/have a health exam. Achieving a high PCQS was strongly associated with having a health exam regardless of health exam definition or IDD status. Conclusions: Despite the publication of guidelines, only a small proportion of adults with IDD are receiving health exams. This indicates that the publication of guidelines alone was not sufficient to change practice. More targeted measures, such as the implementation of an IDD-specific health exam fee code, should be considered to increase the uptake of the health exam among adults with IDD.

The Economic Case for Electric Mining Equipment and Technical Considerations Relating to their Implementation

Underground hardrock mining can be very energy intensive and in large part this can be attributed to the power consumption of underground ventilation systems. In general, the power consumed by a mine’s ventilation system and its overall scale are closely related to the amount of diesel power in operation. This is because diesel exhaust is a major source of underground air pollution, including diesel particulate matter (DPM), NO2 and heat, and because regulations tie air volumes to diesel engines. Furthermore, assuming the size of airways remains constant, the power consumption of the main system increases exponentially with the volume of air supplied to the mine. Therefore large diesel fleets lead to increased energy consumption and can also necessitate large capital expenditures on ventilation infrastructure in order to manage power requirements. Meeting ventilation requirements for equipment in a heading can result in a similar scenario with the biggest pieces leading to higher energy consumption and potentially necessitating larger ventilation tubing and taller drifts. Depending on the climate where the mine is located, large volumes of air can have a third impact on ventilation costs if heating or cooling the air is necessary. Annual heating and cooling costs, as well as the cost of the associated infrastructure, are directly related to the volume of air sent underground. This thesis considers electric mining equipment as a means for reducing the intensity and cost of energy consumption at underground, hardrock mines. Potentially, electric equipment could greatly reduce the volume of air needed to ventilate an entire mine as well as individual headings because they do not emit many of the contaminants found in diesel exhaust and because regulations do not connect air volumes to electric motors. Because of the exponential relationship between power consumption and air volumes, this could greatly reduce the amount of power required for mine ventilation as well as the capital cost of ventilation infrastructure. As heating and cooling costs are also directly linked to air volumes, the cost and energy intensity of heating and cooling the air would also be significantly reduced. A further incentive is that powering equipment from the grid is substantially cheaper than fuelling them with diesel and can also produce far fewer GHGs. Therefore, by eliminating diesel from the underground workers will enjoy safer working conditions and operators and society at large will gain from a smaller impact on the environment. Despite their significant potential, in order to produce a credible economic assessment of electric mining equipment their impact on underground systems must be understood and considered in their evaluation. Accordingly, a good deal of this thesis reviews technical considerations related to the use of electric mining equipment, especially ones that impact the economics of their implementation. The goal of this thesis will then be to present the economic potential of implementing the equipment, as well as to outline the key inputs which are necessary to support an evaluation and to provide a model and an approach which can be used by others if the relevant information is available and acceptable assumptions can be made.

Supporting Run-time Monitoring of UML-RT through Customizable Monitoring Configurations in PapyrusRT

Model Driven Engineering uses the principle that code can automatically be generated from software models which would potentially save time and cost of development. By this methodology, a systems structure and behaviour can be expressed in more abstract, high level terms without some of the accidental complexity that the use of a general purpose language can bring. Models are the actual implementation of the system unlike in traditional software development where models are often used for documentation purposes only. However once the code is generated from the model, testing and debugging activities tend to happen on the code level and the model is not updated. We believe that monitoring on the model level could potentially facilitate quality assurance activities as the errors are detected in the early phase of development. In this thesis, we create a Monitoring Configuration for an open source model driven engineering tool called PapyrusRT in Eclipse. We support the run-time monitoring of UML-RT elements with a tracing tool called LTTng. We annotate the model with monitoring information to be used by the code generator for adding tracepoint statements for the corresponding elements. We provide the option of a timing specification to discover latency errors on the model. We validate the results by creating and tracing real time models in PapyrusRT.

Study of Liquid Desiccant Air-Conditioning for High Performance Greenhouses

Greenhouses have become an invaluable source of year-round food production. Further development of viable and efficient high performance greenhouses is important for future food security. Closing the greenhouse envelope from the environment can provide benefits in space heating energy savings, pest control, and CO2 enrichment. This requires the application of a novel air conditioning system to handle the high cooling loads experienced by a greenhouse. Liquid desiccant air-conditioning (LDAC) have been found to provide high latent cooling capacities, which is perfect for the application of a humid greenhouse microclimate. TRNSYS simulations were undertaken to study the feasibility of two liquid desiccant dehumidification systems based on their capacity to control the greenhouse microclimate, and their cooling performance. The base model (B-LDAC) included a natural gas boiler, and two cooling systems for seasonal operation. The second model (HP-LDAC) was a hybrid liquid desiccant-heat pump dehumidification system. The average tCOPdehum and tCOPtotal of the B-LDAC system increased from 0.40 and 0.56 in January to 0.94 and 1.09 in June. Increased load and performance during a sample summer day improved these values to 3.5 and 3.0, respectively. The average eCOPdehum and eCOPtotal values were 1.0 and 1.8 in winter, and 1.7 and 2.1 in summer. The HP-LDAC system produced similar daily performance trends where the annual average eCOPdehum and eCOPtotal values were 1.3 and 1.2, but the sample day saw peaks of 2.4 and 3.2, respectively. The B-LDAC and HP-LDAC results predicted greenhouse temperatures exceeding 30°C for 34% and 17% of the month of July, respectively. Similarly, humidity levels increased in summer months, with a maximum of 14% of the time spent over 80% in May for both models. The percentage of annual savings in space heating energy associated with closing the greenhouse to ventilation was 34%. The additional annual regeneration energy input was reduced by 26% to 526 kWhm-2, with the implementation of a heat recovery ventilator on the regeneration exhaust air. The models also predicted an electrical energy input of 245 kWhm-2 and 305 kWhm-2 for the B-LDAC and HP-LDAC simulations, respectively.

PHYSICAL ACTIVITY EXPERIENCES OF PERSIAN WOMEN RECENTLY IMMIGRATED TO CANADA

New immigrants to Canada are generally in similar or better physical and mental health than people born in Canada, however, many studies suggest that their health tends to decline quickly after immigration. Lower physical activity levels among new immigrants might be contributing to this phenomenon. There is a paucity of information regarding the physical activity behaviour of the Canadian immigrant population in general and of West Asian women, such as Iranians (Persians), in particular. Given that this group is characterised by an increasing population growth and lower rates of physical activity, it is critical to understand how best to address physical activity promotion in this population. Purpose: To understand the physical activity experiences of Persian women recently immigrated to Toronto, Canada in order to develop recommendations for the design and implementation of tailored physical activity programs. Methods: A qualitative interpretive description approach was chosen to collect and describe ideas, experiences, and perceptions of physical activity within 10 new immigrant women. Using an inductive approach, two fundamental techniques of immersion and crystallization were used throughout the analysis. Thematic analysis was conducted by performing a sequential process of open and axial coding. Emerged themes were further conceptualized through a socio-ecological lens. Results: The facilitators and barriers to physical activity among the women were situated within five overarching categories, 1) Perceptions about physical activity, 2) New physical environment and social structure, 3) Cultural heritage values, 4) Settlement and immigration factors, and 5) Physical activity program features. Discussion: Findings revealed that Persian new immigrant women’s engagement in physical activity after immigration is influenced by factors across the individual, sociocultural, environmental, institutional, and policy levels. Newcomer women’s physical activity was influenced by their transition from their society of origin to the host society and the challenges and successes experienced throughout the settlement and acculturation process. The most noticeable barrier to physical activity in Canada for the women emerged as the lack of communication of physical activity information to newcomers. A set of recommendations is provided for developing efficient physical activity programs for Persian immigrant women, which may also be relevant for other immigrant groups in Canada.