THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.

Mitigating Social Risk in the Extractive Sector: Developing Intercultural Competence as a Tool for Negotiating Western-Indigenous Perspectives within the Undergraduate Mining Engineering Curriculum

Drawing upon critical, communications, and educational theories, this thesis develops a novel framing of the problem of social risk in the extractive sector, as it relates to the building of respectful relationships with indigenous peoples. Building upon Bakhtin’s dialogism, the thesis demonstrates the linkage of this aspect of social risk to professional education, and specifically, to the undergraduate mining engineering curriculum, and develops a framework for the development of skills related to intercultural competence in the education of mining engineers. The knowledge of social risk, as well as the level of intercultural competence, of students in the mining engineering program, is investigated through a mixture of surveys and focus groups – as is the impact of specific learning interventions. One aspect of this investigation is whether development of these attributes alters graduates’ conception of their identity as mining engineers, i.e. the range and scope of responsibilities, and understanding of to whom responsibilities are owed, and their role in building trusting relationships with communities. Survey results demonstrate that student openness to the perspectives of other cultures increases with exposure to the second year curriculum. Students became more knowledgeable about social dimensions of responsible mining, but not about cultural dimensions. Analysis of focus group data shows that students are highly motivated to improve community perspectives and acceptance. It is observed that students want to show respect for diverse peoples and communities where they will work, but they are hampered by their inability to appreciate the viewpoints of people who do not share their values. They embrace benefit sharing and environmental protection as norms, but they mistakenly conclude that opposition to mining is rooted in a lack of education rather than in cultural values. Three, sequential, threshold concepts are identified as impeding development of intercultural competence: Awareness and Acknowledgement of Different Forms of Knowledge; Recognition that Value Systems are a Function of Culture; Respect for varied perceptions of Social Wellbeing and Quality of Life. Future curriculum development in the undergraduate mining engineering program, as well as in other educational programs relevant to the extractive sector, can be effectively targeted by focusing on these threshold concepts.

The Capital Sculpture of Wells Cathedral, c. 1184-1210

The understudied capital sculpture of Wells Cathedral in Somerset, England (c. 1184-1210) provides ample opportunity of expanding the current scholarship and understanding of interior ecclesiastical sculpture in a West Country cathedral. While the Gothic style of architecture is typically understood as, according to Paul Binski (2014), rational in execution and reception, the capital sculpture at Wells Cathedral has been considered illogical in terms of both its iconography and location within the nave, transepts, and north porch. Utilizing Michael Camille’s post/anti-iconographical approach, this project examines the Wells figural capitals in five case studies: labour, Old and New Testament Scenes, animals and beast fables, busts, and monsters and hybrids. Each group of capitals will be approached with an understanding that this type of art was viewed by people of different classes and professions, with each viewer bringing their own personal experiences and abilities into how they could have read and understood these types of images. Therefore, the capitals at Wells must be read through layers of meaning and interpretation while also considering their locations within the cathedral and how they react and respond to surrounding figural capitals.

Psychosocial Functioning in Women with Symptoms of Persistent Genital Arousal

Persistent genital arousal disorder (PGAD) is characterized by physiological sexual arousal (vasocongestion, sensitivity of the genitals and nipples) that is described as distressing, and sometimes painful. Although awareness of PGAD is growing, there continues to be a lack of systematic research on this condition. The vast majority of published reports are case studies. Little is known about the symptom characteristics, biological factors, or psychosocial functioning associated with the experience of persistent genital arousal (PGA) symptoms. This study sought to characterize a sample of women with PGA (Study One); compare women with and without PGA symptoms on a series of biopsychosocial factors (Study Two); and undertake an exploratory comparison of women with PGA, painful PGA, and genital pain (Study Three)—all within a biopsychosocial framework. Symptom-free women, women with PGA symptoms, painful PGA, and genital pain, completed an online survey of biological factors (medical history, symptom profiles), psychological factors (depression, anxiety) and social factors (sexual function, relationship satisfaction). Study One found that women report diverse symptoms associated with PGA, with almost half reporting painful symptoms. In Study Two, women with symptoms of PGA reported significantly greater impairment in most domains of psychosocial functioning as compared to symptom-free women. In particular, catastrophizing of vulvar sensations was related to symptom ratings (i.e., greater severity, distress) and psychosocial outcomes (i.e., greater depression and anxiety). Finally, Study Three found that women with PGA symptoms reported some overlap in medical comorbidities and symptom expression as those with combined PGA and vulvodynia and those with vulvodynia symptoms alone; however, there were also a number of significant differences in their associated physical symptoms. These studies indicate that PGA symptoms have negative consequences for the psychosocial functioning of affected women. As such, future research and clinical care may benefit from a biopsychosocial approach to PGA symptoms. These studies highlight areas for more targeted research, including the role of catastrophizing in PGA symptom development and maintenance, and the potential conceptualization of both PGA and vulvodynia (and potentially other conditions) under a general umbrella of ‘genital paraesthesias’ (i.e., disorders characterized by abnormal sensations, such as tingling and burning).

LINEUP SIZE AND NUMBER OF CUES: WHEN BIGGER ISN’T BETTER

Larger lineups could protect innocent suspects from being misidentified; however, they can also decrease correct identifications. Bertrand (2006) investigated whether the decrease in correct identifications could be prevented by adding more cues, in the form of additional views of lineup members’ faces, to the lineup. Adding these cues was successful to an extent. The current series of studies attempted to replicate Bertrand’s (2006) findings while addressing some methodological issues—namely, the inconsistency in image size as lineup size increased. First, I investigated whether image size could affect face recognition (Chapter 2) and found it could, but that it also affected previously-seen (“old”) versus previously-unseen (“new”) faces differently. Specifically, smaller image sizes at exposure lowered accuracy for old faces, while these same image sizes at recognition lowered accuracy for new faces. Although these results indicate that target recognition would be unaffected by image size at recognition (i.e., during a lineup), lineups are also comprised of previously-unseen faces, in the form of fillers and innocent suspects. Because image size could affect lineup decisions, as it could become more difficult to realize fillers are previously-unseen, I decided to replicate Bertrand (2006) while keeping image size constant in Chapters 3 (simultaneous lineups) and 4 (simultaneous-presentation, sequential decisions). In both Chapters, the integral findings were the same: correct identification rates decreased as lineup size increased from 6- to 24-person lineups, but adding cues had no effect. The inability to replicate Bertrand (2006) could mean that the original finding was due to chance, but alternate explanations also exist, such as the overall size of the array, the degree to which additional cues overlap, and the length of the target exposure. These alternate explanations, along with directions for future research, are discussed in the following Chapters.

‘Black Settlers’: Hybridity, Neoliberalism and Ecosystemic Change Among Tonga Farmers of Southern Zambia, 1964-2008

This dissertation examines a process of indigenous accumulation among Tonga farmers in Zambia’s Southern Province. In the 1970s multiple authors concluded that capitalist farmers had emerged among Tonga agro-pastoralists, predominantly within private titled holdings. Relying on archival research, newspapers, secondary sources and extensive oral testimony this thesis fills a 35-year gap on the topic, providing insights into the social and environmental impacts of neoliberal policy among African peasants and capitalist farmers. In contrast to dominant narratives of the post-independence period, this study argues that Zambia did experience a developmental process post-independence, which saw significant achievements made in the agricultural sector, including the doubling of national cattle stocks. The data reveals a painful process of disarticulation beginning in the late 1980s. Following neoliberal adjustment, we observe significant heterogeneity in production systems, some regional specialization, and processes of migration. Most importantly, the thesis uncovers processes of overwhelming ecosystemic change that contributed to livestock epidemics of severe scale and scope. Amazingly, this went largely undocumented because of the simultaneous crisis of the state, which left the national statistics office and other state bodies incapable of functioning from the late 1980s into the 2000s. In response, the Zambian state has introduced a number of neodevelopmental initiatives in the sector, yet the lack of animal traction remained up to 2008 and agricultural production declined, while more capitalized farmers (largely white, and/or with foreign direct investment) have become more significant players in the country. This thesis provides compelling evidence to challenge dominant economic thinking of the Washington institutions as well as many of the common Marxian formulations.

TILTED COLUMNAR THIN FILM COATINGS WITH ANISOTROPIC LIGHT SCATTERING PROPERTIES FOR SOLAR ENERGY APPLICATIONS

The main goal of this thesis is to show the versatility of glancing angle deposition (GLAD) thin films in applications. This research is first focused on studying the effect of select deposition variables in GLAD thin films and secondly, to demonstrate the flexibility of GLAD films to be incorporated in two different applications: (1) as a reflective coating in low-level concentration photovoltaic systems, and (2) as an anode structure in dye-sensitized solar cells (DSSC). A particular type of microstructure composed of tilted micro-columns of titanium is fabricated by GLAD. The microstructures form elongated and fan-like tilted micro-columns that demonstrate anisotropic scattering. The thin films texture changes from fiber texture to tilted fiber texture by increasing the vapor incidence angle. At very large deposition angles, biaxial texture forms. The morphology of the thin films deposited under extreme shadowing condition and at high temperature (below recrystallization zone) shows a porous and inclined micro-columnar morphology, resulting from the dominance of shadowing over adatom surface diffusion. The anisotropic scattering behavior of the tilted Ti thin film coatings is quantified by bidirectional reflectance distribution function (BRDF) measurements and is found to be consistent with reflectance from the microstructure acting as an array of inclined micro-mirrors that redirect the incident light in a non-specular reflection. A silver-coating of the surface of the tilted-Ti micro-columns is performed to enhance the total reflectance of the Ti-thin films while keeping the anisotropic scattering behavior. By using such coating is as a booster reflector in a laboratory-scale low-level concentration photovoltaic system, the short-circuit current of the reference silicon solar cell by 25%. Finally, based on the scattering properties of the tilted microcolumnar microstructure, its scattering effect is studied as a part of titanium dioxide microstructure for the anode in DSSCs. GLAD-fabricated TiO2 microstructures for the anode in a DSSC, consisting of vertical micro-columns, and combined vertical topped with tilted micro-columns are compared. The solar cell with the two-part microstructure shows the highest monochromatic incident photon to current efficiency with 20% improvement compared to the vertical microstructure, and the efficiency of the cell increases from 1.5% to 2% due to employing the scattering layer.