Examining Cognitive Processing in Children with an Arithmetic Disability

Currently there is no consensus as to the specific cognitive impairments that characterize mathematical disabilities (MD) or specific subtypes such as an arithmetic disability (AD). The present study sought to address this concern by examining cognitive processes that might undergird AD in children. The present study utilized archival data to conduct two investigations. The first investigation examined the executive functioning and working memory of children with AD. An age-matched achievement-matched design was employed to explore whether children with AD exhibit developmental lags or deficits in these cognitive domains. While children with AD did not exhibit impairments in verbal working memory or colour word inhibition, they did demonstrate impairments in shifting attention, visual-spatial working memory, and quantity inhibition. As children with AD did not perform more poorly than their younger achievement-matched peers on any of these tasks, impairments in specific areas of executive functioning and working memory appeared to reflect a developmental lag rather than a cognitive deficit. The second study examined the phonological processing performance of children with AD compared to children with comorbid disabilities in arithmetic and word recognition (AD/WRD) and to typically achieving (TA) children. Results indicated that, while children with AD did demonstrate impairments on all isolated naming speed tasks, trail making digits, and memory for digits, they did not demonstrate impairments on measures of phonological awareness, nonword repetition, serial processing speed, or serial naming speed. In contrast, children with AD/WRD demonstrated impairments on measures of phonological awareness, phonological short-term memory, isolated naming speed, serial processing speed, and the alphabet a-z task. Overall, results suggested that phonological processing impairments are more prominent in children with a WRD than children with an AD. Together, these studies further our understanding of the nature of the cognitive processes that underlie AD by focusing upon rarely used methods (i.e., age-matched achievement-matched design) and under-examined cognitive domains (i.e., phonological processing).

Restrictions on Aliens in the United Kingdom, 1914-1919 : a Study of the Origins and Political Background of the Aliens Restrictions Acts of 1914 and 1919.

At first glance the Aliens Restriction Act of 1914, which was introduced and passed on the first day of World War One, seems a hasty and ill-prepared piece of legislation. Actually, when examined in the light of Arthur Marwick's thesis that war is a forcing house for pre-existent social and governmental ideas, it becomes clear that the act was not after all the product of hastily formed notions. In point of fact it followed the precedent of detailed draft clauses produced in 1911 by a sub-committee of the Committee of Imperial Defence established to consider the treatment of aliens in the event of war. Indeed the draft clauses and the restrictions embodied in the 1914 act were strikingly similar to restrictions on aliens legislated in 1793. Hostility to aliens had been growing from 1905 to 1914 and this hostility blossomed into xeno-phobia on the outbreak of war, a crucial precondition for the specifically anti-enemy fears of the time. In 1919 the Aliens Restriction (Amendment) Bill was introduced into parliament to extend temporarily the provisions of the 1914 act thus permitting the Home Secretary to plan permanent, detailed legislation. Two minority groups of MPs with extreme views on the treatment of aliens were prominent in the debates on this bill. The extreme Liberal group which advocated leniency in the treatment of aliens had little effect on the final form of the bill, but the extreme Conservative group, which demanded severe restrictions on aliens, succeeded in persuading the government to include detailed restrictions. Despite its allegedly temporary nature, the Aliens Restriction (Amendment) Act of 1919 was renewed annually until 1971.

Bullying Involvement and Adolescent Substance Use: A Study of Multilevel Risk and Protective Factors

Bullying, frequent drunkenness, and frequent cannabis use are significant health-risk behaviours among youth. While many studies have demonstrated that bullying involvement may initiate a developmental pathway to both types of frequent substance use, there is a limited understanding of the connection between these behaviours. The presence of risk and protective factors within youths’ relationships and within their neighbourhoods may alter the associations between bullying involvement and both types of frequent substance use. A systemic approach is needed to assess the complex, social environments in which youth are embedded. The current thesis consists of two studies that examined the associations between bullying and both types of frequent substance use within the context of youths’ social environments. In Study 1, multilevel modeling was used to examine the associations between bullying and frequent substance use within the context of individual and neighbourhood risk factors. Our results indicated that the risk factors associated with both frequent drunkenness and frequent cannabis use exist at both levels, with neighbourhoods altering the association of individual risk factors. Moreover, bullying was a unique risk factor associated with both types of frequent substance use, whereas indirect associations were observed for victimization. Study 2 used a similar methodology to examine the association between bullying and both types of frequent substance use within the context of individual and neighbourhood protective factors. Once again, our results indicated that the protective factors associated with both types of frequent substance use exist at multiple levels, and that neighbourhoods altered the association of individual protective factors. Additionally, positive relationship characteristics interacted with the link between bullying and both types of frequent substance use. Together, these findings clarify the nature of the bullying-substance use link and emphasize the need to study adolescent development in context.

RELIBILITY ANALYSIS OF SIMPLE SLOPES AND SOIL-STRUCTURES WITH LINEAR LIMIT STATES

The first objective of this research was to develop closed-form and numerical probabilistic methods of analysis that can be applied to otherwise conventional methods of unreinforced and geosynthetic reinforced slopes and walls. These probabilistic methods explicitly include random variability of soil and reinforcement, spatial variability of the soil, and cross-correlation between soil input parameters on probability of failure. The quantitative impact of simultaneously considering the influence of random and/or spatial variability in soil properties in combination with cross-correlation in soil properties is investigated for the first time in the research literature. Depending on the magnitude of these statistical descriptors, margins of safety based on conventional notions of safety may be very different from margins of safety expressed in terms of probability of failure (or reliability index). The thesis work also shows that intuitive notions of margin of safety using conventional factor of safety and probability of failure can be brought into alignment when cross-correlation between soil properties is considered in a rigorous manner. The second objective of this thesis work was to develop a general closed-form solution to compute the true probability of failure (or reliability index) of a simple linear limit state function with one load term and one resistance term expressed first in general probabilistic terms and then migrated to a LRFD format for the purpose of LRFD calibration. The formulation considers contributions to probability of failure due to model type, uncertainty in bias values, bias dependencies, uncertainty in estimates of nominal values for correlated and uncorrelated load and resistance terms, and average margin of safety expressed as the operational factor of safety (OFS). Bias is defined as the ratio of measured to predicted value. Parametric analyses were carried out to show that ignoring possible correlations between random variables can lead to conservative (safe) values of resistance factor in some cases and in other cases to non-conservative (unsafe) values. Example LRFD calibrations were carried out using different load and resistance models for the pullout internal stability limit state of steel strip and geosynthetic reinforced soil walls together with matching bias data reported in the literature.

DEVELOPMENT OF A MECHANISM AND PROCESS TO CONTINUOUSLY PRODUCE SPHERICAL, TORREFIED BIOMASS PELLETS

A recently developed novel biomass fuel pellet, the Q’ Pellet, offers significant improvements over conventional white pellets, with characteristics comparable to those of coal. The Q’ Pellet was initially created at bench scale using a proprietary die and punch design, in which the biomass was torrefied in-situ¬ and then compressed. To bring the benefits of the Q’ Pellet to a commercial level, it must be capable of being produced in a continuous process at a competitive cost. A prototype machine was previously constructed in a first effort to assess continuous processing of the Q’ Pellet. The prototype torrefied biomass in a separate, ex-situ reactor and transported it into a rotary compression stage. Upon evaluation, parts of the prototype were found to be unsuccessful and required a redesign of the material transport method as well as the compression mechanism. A process was developed in which material was torrefied ex-situ and extruded in a pre-compression stage. The extruded biomass overcame multiple handling issues that had been experienced with un-densified biomass, facilitating efficient material transport. Biomass was extruded directly into a novel re-designed pelletizing die, which incorporated a removable cap, ejection pin and a die spring to accommodate a repeatable continuous process. Although after several uses the die required manual intervention due to minor design and manufacturing quality limitations, the system clearly demonstrated the capability of producing the Q’ Pellet in a continuous process. Q’ Pellets produced by the pre-compression method and pelletized in the re-designed die had an average dry basis gross calorific value of 22.04 MJ/kg, pellet durability index of 99.86% and dried to 6.2% of its initial mass following 24 hours submerged in water. This compares well with literature results of 21.29 MJ/kg, 100% pellet durability index and <5% mass increase in a water submersion test. These results indicate that the methods developed herein are capable of producing Q’ Pellets in a continuous process with fuel properties competitive with coal.

THE ELEMENTARY TEACHERS’ PERCEPTIONS OF MOTIVATION FOR AND THE PRINCIPAL’S INFLUENCE ON THEIR ENGAGEMENT IN SELF-DIRECTED PROFESSIONAL DEVELOPMENT

All teachers participate in self-directed professional development (PD) at some point in their careers; however, the degree to which this participation takes place varies greatly from teacher to teacher and is influenced by the leadership of the school principal. The motivation behind why teachers choose to engage in PD is an important construct. Therefore, there is a need for better understanding of the leader’s role with respect to how and why teachers engage in self-directed professional development. The purpose of the research was to explore the elementary teachers’ motivation for and the school principal’s influence on their engagement in self-directed professional development. Three research questions guided this study: 1. What motivates teachers to engage in self-directed professional development? 2. What are the conditions necessary for promoting teachers’ engagement in self-directed professional development? 3. What are teachers’ perceptions of the principal’s role in supporting, fostering, encouraging, and sustaining the professional development of teachers? A qualitative research approach was adopted for this study. Six elementary teachers from one south-eastern Ontario school board, consisting of three novice and three more experienced teachers, provided their responses to a consistent complement of 14 questions. Their responses were documented via individual interviews, transcribed verbatim, and thematically analysed. The findings suggested that, coupled with the individual motivating influences, the culture of the school was found to be a conditional dynamic that either stimulated or dissuaded participation in self-directed PD. The school principal provided an additional catalyst or deterrence via relational disposition. When teachers felt their needs for competency, relatedness, and autonomy were satisfied, the conditions necessary to motivate teachers to engage in PD were fulfilled. A principal who personified the tenets of transformational leadership served to facilitate teachers’ inclinations to take on PD. A leadership style that was collaborative and trustful and allowed for personal autonomy was a dominant foundational piece that was critical for participant participation in self-directed PD. Finally, the principals were found to positively impact school climate by partaking in PD alongside teachers and ensuring there was a shared vision of the school so that teachers could tailor PD to parallel school interests.

The relationship of E. coli and total coliform culture to the quantitative molecular detection of various fecal indicators, sources, and pathogens in private drinking water wells

Water remains a predominant vector for human enteric pathogens not just for developing countries but also developed nations, where numerous infectious disease outbreaks, linked to the contamination of drinking water have been documented. Private drinking water wells are a source of drinking water that is largely unstudied even though a significant percentage of the population in Ontario relies on wells as their primary water source. As there exists little to no systematic surveillance for enteric infections or outbreaks related to well water sources, these individuals may be at higher risk of waterborne infectious diseases. The relationships between various fecal indicators in the water of private drinking water wells, including E. coli, Total Coliforms (TC) and Bacteroides, and enteric pathogens, including Campylobacter jejuni, Salmonella spp., and Shiga toxin producing E. coli, were studied. Convenience private well water samples collected from various regions of interest during the summer of 2014 underwent membrane filtration and culture to determine quantities of E. coli and TC colony forming units. 289 E. coli positive and 230 TC-only waters were successfully analyzed by individual qPCR assays for the aforementioned enteric pathogens. Microbial source tracking methods targeted to specific Bacteroides were used to determine the source of fecal contamination as either human or bovine. The source of fecal contamination varied by geographic region and is thought to be due to such things as differences in septic tank density and underlying geology, among others. Fecal indicators, E. coli and Bacteroides, were significantly correlated. E. coli as measured by qPCR was more strongly correlated to both total and human-specific Bacteroides genetic markers than culturable E. coli. Lastly, 1.9% of samples showed molecular evidence of contamination with enteric pathogens. Although low, this finding is significant given the limited volume of water available for testing, and suggests a potential health risk to consumers. Knowing the extent of contamination, as well as the biologic source, can better inform risk assessment and the development of potential intervention strategies for private well water in specific regions of Ontario.

The roles of EFN-1 and seam cell V2 in the transmission of a stop cue for the posterior lateral microtubule in Caenorhabditis elegans

A functional nervous system requires the precise arrangement of all nerve cells and their neurites. To achieve this correct assembly, a myriad of molecular guidance cues works together to direct the outgrowth of neurites to their correct positions. The small nematode C. elegans provides the ideal model system to study the complex mechanisms of neurite guidance due to its relatively simple nervous system, composed of 302 neurons. I used two mechanosensory neurons, called the posterior lateral microtubule (PLM), to investigate the role of the ephrin and Eph receptor protein family in neurite termination in C. elegans. Activation of the C. elegans Eph receptor VAB-1 on the PLM growth cone is sufficient to cause PLM termination, but the identity and location of the activating ligand has not been established. In my thesis I investigated the ability of the ephrin ligand EFN-1 to activate VAB-1 to cause PLM termination when expressed on the same cell (in cis) and on opposing cells (in trans) to the receptor. I showed that EFN-1 is able to activate VAB-1 in cis and in trans to cause PLM termination. I also assessed the hypodermal seam cells as the source of the ephrin stop cue using fluorescently labelled and seam cell mutant transgenic worms. I found that although the PLM shows consistent termination on the seam cell V2 in wild type worms independent of PLM length, this process is not significantly disrupted in seam cell mutants. With this information I have created a new hypothesis that the PLM neurite is able the provide a positional cue for the developing seam cells, and have created a new transgenic strain which can be used to assess the impact of PLM and ALM cell ablation on seam cell position. My research is the first to demonstrate the ability of an ephrin ligand to activate its ephrin receptor in cis, and further research can investigate if this finding has in vivo applications.

Axis Mapping: The Estimation of Surface Orientations and its Applications in Vehicle Localization and Structural Geology

The map representation of an environment should be selected based on its intended application. For example, a geometrically accurate map describing the Euclidean space of an environment is not necessarily the best choice if only a small subset its features are required. One possible subset is the orientations of the flat surfaces in the environment, represented by a special parameterization of normal vectors called axes. Devoid of positional information, the entries of an axis map form a non-injective relationship with the flat surfaces in the environment, which results in physically distinct flat surfaces being represented by a single axis. This drastically reduces the complexity of the map, but retains important information about the environment that can be used in meaningful applications in both two and three dimensions. This thesis presents axis mapping, which is an algorithm that accurately and automatically estimates an axis map of an environment based on sensor measurements collected by a mobile platform. Furthermore, two major applications of axis maps are developed and implemented. First, the LiDAR compass is a heading estimation algorithm that compares measurements of axes with an axis map of the environment. Pairing the LiDAR compass with simple translation measurements forms the basis for an accurate two-dimensional localization algorithm. It is shown that this algorithm eliminates the growth of heading error in both indoor and outdoor environments, resulting in accurate localization over long distances. Second, in the context of geotechnical engineering, a three-dimensional axis map is called a stereonet, which is used as a tool to examine the strength and stability of a rock face. Axis mapping provides a novel approach to create accurate stereonets safely, rapidly, and inexpensively compared to established methods. The non-injective property of axis maps is leveraged to probabilistically describe the relationships between non-sequential measurements of the rock face. The automatic estimation of stereonets was tested in three separate outdoor environments. It is shown that axis mapping can accurately estimate stereonets while improving safety, requiring significantly less time and effort, and lowering costs compared to traditional and current state-of-the-art approaches.

An exploration of students’ perceptions and attitudes towards creativity in engineering education

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.

Differential contributions of the mIPS and PMd in the movement planning of reaches investigated through HD-tDCS

To reach for a target, we must formulate a movement plan - a difference vector of the target position with respect to the starting hand position. While it is known that the medial part of the intraparietal sulcus (mIPS) and the dorsal premotor (PMd) activity reflects aspects of a kinematic plan for a reaching movement, it is unclear whether or how the two regions may differ. We investigated the functional roles of the mIPS and PMd in the planning of reaching movements using high definition transcranial direct current stimulation (HD-tDCS) and examined changes in horizontal endpoint error when participants were subjected to anodal and cathodal stimulation. The left mIPS and PMd were functionally localized with fMRI in each participant using an interleaved center-out pointing and saccade task and mapped onto the scalp using Brainsight. We adopted a randomized, single-blind design and applied anodal and cathodal stimulation (2mA for 20 min; 3cm radius 4x1 electrode placement) during 4 separate visits scheduled at least a week apart. Each participant performed 250 baseline, stimulation, and post-stimulation memory-guided reaches starting from one of two initial hand positions (IHPs) to one of 4 briefly flashed targets (20 cm distant, 5 cm apart horizontally) while fixating on a straight-ahead cross located at the target line. Separate 2-way repeated measures ANOVAs of horizontal endpoint error difference after cathodal tDCS at each stimulation site revealed a significant IHP by target position interaction effect at the left mIPS, and significant IHP and target main effects at the left PMd. Behaviorally, these effects corresponded to IHP-dependent contractions after cathodal mIPS tDCS and IHP-independent contractions after cathodal PMd tDCS. These results suggest that the movement vector is not yet formed at the input level of mIPS, but is encoded at the input of PMd. These results also indicate that tDCS is a viable, useful method in investigating movement planning properties through temporary perturbations of the system.

THE EFFECT OF PREECLAMPSIA ON RENAL FUNCTION: CROSS-SECTIONAL STUDIES OF POSTPARTUM PREECLAMPTICS AND WOMEN WHO WERE DESTINED TO DEVELOP PREECLAMPSIA

Preeclampsia (PE) is a pregnancy complication that is new-onset of hypertension and proteinuria after 20 weeks of gestation. However, subclinical renal dysfunction may be apparent earlier in gestation prior to the clinical presentation of PE. Although the maternal syndrome of PE resolves early postpartum, women with a history of PE are at higher risk of renal dysfunction later in life. Mineral metabolism, such as phosphate balance is heavily dependent on renal function, yet, phosphate handling in women with a history of PE is largely unknown. To investigate whether women with a history of PE would exhibit changes in phosphate metabolism compared to healthy parous women, phosphate loading test was used. Women with or without a history of PE, who were 6 months to 5 years postpartum, were recruited for this study. Blood and urine samples were collected before and after the oral dosing of 500mg phosphate solution. Biochemical markers of phosphate metabolism and renal function were evaluated. In order to assess the difference in renal function alteration between first trimester women who were or were not destined to develop PE, plasma cystatin C concentration was analysed. After phosphate loading, women with a history of PE had significantly elevated serum phosphate at both 1- and 2-hour, while controls had higher urine phosphate:urine creatinine excretion ratio at 1-hour than women with a history of PE. Women with a history of PE had no changes in intact parathyroid hormone (iPTH) concentration throughout the study period, whereas controls had elevated iPTH at 1-hour from baseline. In terms of renal function in the first trimester, there was no difference in plasma cystatin C concentration between women who were or were not destined to develop PE. The elevation of serum phosphate in women with a history of PE could be due to the delay in phosphate excretion. Prolong elevation of serum phosphate can have serious consequences later in life. Thus, oral phosphate challenge may serve as a useful method of early screening for altered phosphate metabolism and renal function.

Refractometry Studies of the Optical Properties of Polymer Films and the Development of Polymer Coated Refractive Index Sensors

Sensors for real-time monitoring of environmental contaminants are essential for protecting ecosystems and human health. Refractive index sensing is a non-selective technique that can be used to measure almost any analyte. Miniaturized refractive index sensors, such as silicon-on-insulator (SOI) microring resonators are one possible platform, but require coatings selective to the analytes of interest. A homemade prism refractometer is reported and used to characterize the interactions between polymer films and liquid or vapour-phase analytes. A camera was used to capture both Fresnel reflection and total internal reflection within the prism. For thin-films (d = 10 μm - 100 μm), interference fringes were also observed. Fourier analysis of the interferogram allowed for simultaneous extraction of the average refractive index and film thickness with accuracies of ∆n = 1-7 ×10-4 and ∆d < 3-5%. The refractive indices of 29 common organic solvents as well as aqueous solutions of sodium chloride, sucrose, ethylene glycol, glycerol, and dimethylsulfoxide were measured at λ = 1550 nm. These measurements will be useful for future calibrations of near-infrared refractive index sensors. A mathematical model is presented, where the concentration of analyte adsorbed in a film can be calculated from the refractive index and thickness changes during uptake. This model can be used with Fickian diffusion models to measure the diffusion coefficients through the bulk film and at the film-substrate interface. The diffusion of water and other organic solvents into SU-8 epoxy was explored using refractometry and the diffusion coefficient of water into SU-8 is presented. Exposure of soft baked SU-8 films to acetone, acetonitrile and methanol resulted in rapid delamination. The diffusion of volatile organic compound (VOC) vapours into polydimethylsiloxane and polydimethyl-co-polydiphenylsiloxane polymers was also studied using refractometry. Diffusion and partition coefficients are reported for several analytes. As a model system, polydimethyl-co-diphenylsiloxane films were coated onto SOI microring resonators. After the development of data acquisition software, coated devices were exposed to VOCs and the refractive index response was assessed. More studies with other polymers are required to test the viability of this platform for environmental sensing applications.

Paternalism and Competent Patient Choice in the Standards of Care for the Health of Transsexual, Transgender, and Gender-Nonconforming People

In 2016 physicians in Ontario will be granted the authority to refer patients with gender dysphoria for sex reassignment surgery. In order to be granted this authority physicians must be trained in the World Professional Association for Transgender Health’s Standards of Care, which outlines healthcare procedures for the treatment of gender dysphoria and provides background information concerning transgender health. The Standards of Care require that patients undergo a process of 12 months of continuous living in a gender role that is congruent with their gender identity prior to being given access to sex reassignment surgery. While this requirement can sometimes be helpful it can also cause more harm than benefit. This paper argues that the requirement is strongly paternalistic in its current form and should no longer be mandatory in most cases.

An Investigation of the Features and Effectiveness of the Full-Day Early Learning Kindergarten Program in Ontario

This dissertation includes two studies. Study 1 is a qualitative case study that describes enactment of the main components of a high fidelity Full-Day Early Learning Kindergarten (FDELK) classroom, specifically play-based learning and teacher-ECE collaboration. Study 2 is a quantitative analysis that investigates how effectively the FDELK program promotes school readiness skills, namely self-regulation, literacy, and numeracy, in Kindergarteners. To describe the main components of an FDELK classroom in Study 1, a sub-sample of four high fidelity case study schools were selected from a larger case study sample. Interview data from these schools’ administrators, educators, parents, and community stakeholders were used to describe how the main components of the FDELK program enabled educators to meet the individual needs of students and promote students’ SR development. In Study 2, hierarchical regression analyses of 32,207 students’ self-regulation, literacy, and numeracy outcomes using 2012 Ontario Early Development Instrument (EDI) data revealed essentially no benefit for students participating in the FDELK program when compared to peers in Half-Day or Alternate-Day Kindergarten programs. Being older and female predicted more positive SR and literacy outcomes. Age and gender accounted for limited variance in numeracy outcomes. Results from both studies suggest that the Ontario Ministry of Education should take steps to improve the quality of the FDELK program by incorporating evidence-based guidelines and goals for play, reducing Kindergarten class sizes to more effectively scaffold learning, and revising curriculum expectations to include a greater focus on SR, literacy, and numeracy skills.